Added the ipq807x ethernet edma, ppe driver support
Change-Id: Ibcac04d8a60c1ca74549834b70735a6f15b58358
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
This patch enables qca_mmc driver and
also has the changes required for emmc
support
Change-Id: Icc8d807caffced79d6ca576fe6220c522ebda3f7
Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
This change fixes the ping issue on the AP151 and AP152
targets. The issue happens when ping is attempted for
more than one time on the same port either LAN or WAN.
Change-Id: Iad8b0da3ef15bdf12f73645625167f0ff5106df0
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
Changes to use the C Flags pushed by the openwrt package directly
from within the qca953x target sources is done.
Change-Id: Ib66cdf88ccef33e7805cc7a6831200502d7f1c23
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
Changes to use the C Flags pushed by the openwrt package directly
from within the qca956x target sources is done.
Change-Id: I4bacf9eb23ed442413d4b4f0833e8d1143aea77f
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
Changes to use the C Flags pushed by the openwrt package directly
from within the qca955x target sources is done.
Change-Id: I4f9e6a3e4e919ab01399a803349e79f57573988d
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
Added the ipq807x ethernet edma, ppe, gmac driver support
in the u-boot
Change-Id: I1d8ddd19f2c3d3765adda2253d3b71876142aa59
Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
As the U-boot source is going to be common between ARM and MIPS
architecture , it is required to pick only the files specific
to the respective architectures during the build.
So, move the qca arm target specific common files to another
sub level by specifying the ARCH arm.
Change-Id: I06b538834109981f21fef6270bfb8e437a2f5a7e
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
As ipq8064 SoC v1.0 support is now suspended, bootipq fails to
fetch the config node as it was looking for v1.0 config name.
With this change, bootipq will look for config name with SoC version.
Change-Id: I8cf7c6e279609e21a4c53e229d38aa0e2049c6b1
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
this change enables the support for the AP147 target
Change-Id: Ia9dd0f63578107eb127410d752598081e9be2d85
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
this change enables the support for the AP135 target
Change-Id: I772cdf3a135ac327fec21c42be6248f22d3d3f83
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
The following features are enabled ,
1) AP151 target specific configs are added ( mainly ethernet )
2) AP151 and AP152 share a common configuration file & Makefile
with minimal changes between them. Support for avoiding the conflict
between them is implemented.
Change-Id: Ia71b20199d43cd29ff214c1258e4b15fcd55cb6b
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
This patch will support storing crashdump data
in flash with the following command from u-boot.
dumpipq_flash_data <offset_in_flash>
It reads the TLV (Type Length Value) data passed
through kernel (from a DRAM location), extracts the
required information and writes to boot flash in the
provided offset.
This change provides a reference to add any other
information needed to be saved.
Signed-off-by: Akila N <akilan@codeaurora.org>
(cherry picked from commit 68ac327ce760c8a6b5ce1f35def3d0c4ccc0d00f)
Change-Id: I20517eb6e6fdb941101a3aa55af4cc4ee875779b
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Updated SMEM_BOOT_FLASH_DENSITY for a new entry in the sbl table.
Change-Id: I637457a9d93305cd13c80bb460d4e73aec4a29e6
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
This is required to blow the fuses in QFPROM using data at sec.dat file.
Fuseipq command is invoked with the address of sec.dat file as argument.
Fuseipq invokes scm_call to carry out this action.
Change-Id: Ib73ba61da7ad339859c4b7b4ea2378650cd96fbf
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
tftp transfer failed as gmac descriptor got corrupted.
GMAC descriptors gets addresses from malloc area that
were already used and made free by some other module.
There is a cache invalidate issue when tftp transfer
happens and gmac descriptors gets corrupted.
flush_cache is needed to avoid this.
Change-Id: I40ae7c771bcac3fade78de4454bfa3dafde4b70a
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
This change enables the PCI driver on u-boot for
the AP152 target
Change-Id: I7bce245595935cc844200801c24348f05054b238
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
This change enables the GMAC and PHY driver for
the AP152 target
Change-Id: I2d4155754092a4d04d46a40624a68296f9c8fee0
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
This change enables the flash driver on u-boot for
the AP152 target.
Change-Id: I9778adf4a4d347fdcce16fbfede87f765302595c
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
This change initializes the CPU PLL , configures the
timer, DRAM & enables the serial console for the
AP152 target.
Change-Id: If2a6884813250c09a856c3cb2e1783bf3940619c
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
1. Added ethernet support for DB149
2. Added gmac_gpio node to aliases, to make
it common across the boards
Change-Id: I18a3d3ebaac993635830d36bd7c51f91ebd6749b
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Updated serial init to look for console property in aliases instead of
directly looking for serial node. This is to support device tree to
contain multiple serial nodes with different unit address to support
boards using different gsbi peripherals.
Change-Id: Iae741d7e56464a2a43f9132dfe87af62945ce60e
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
On applying 'reset' command on u-boot, it enables the watchdog
with a default reset value. CPU will reset after the set value.
Change-Id: Idee257e6fcdf576e5209066fabeb76340465c25e
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Inserted soc_version to configuration string
to support soc versions v2.0 and v3.0.
Change-Id: Ifbd92175312df15cb3adf250f964aa156bd33f71
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
In ft_board_setup,
1. Added ipq nand device qcom,qcom_nand to mtd nodes list.
2. The maximum size of mtdparts used is 4096. Hence,
updating MTDPARTS_MAXLEN to match this value.
Change-Id: Iede752ddf72c410c6f4a6f828d8c2caef90cbf09
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
