This change adds MI01.2-C2 (RDP484) which is a derivative of RDP441
with PON SFP connected and ethernet SFP plugged out.
Change-Id: I2075b3a4f09e510bbc5f188209435b97b06e5ba7
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
Changing RDP467 to AL02-C20.
Also updating the return machid type
for AL02-C11 similar to AL02-C12,
since AL02-C11 is converted to RDP455
configuration.
Change-Id: I87e3b954d1ea9f38b24504f5b5754f9fef38df83
Signed-off-by: Hariharan K <quic_harihk@quicinc.com>
This change renames all the affect files from rdp479/rdp481 to
mi01.12/mi01.14 respectively
Change-Id: Ia06a17b9c34bf7e49fe43721db1e83bd4f5a7e3e
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
Since only Q6/TME/TZ should have access to memnoc clock,
so removing the MEMNOC clock enable sequence.
Change-Id: Iee32a59c340cda794b8ee3c314be871ab749ff79
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
skip printing the partition info in smem if it exceeds flash size
Change-Id: Icb13b8d8f0f25f7817dfce2ee42d327081cbbfa6
Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
RDP467 is same as AL02-C4 with PCIE0 enabled with
wkk support.
Change-Id: If6ba645b7c62a3320139a7c86e0b89ec525a0fb7
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
Signed-off-by: Hariharan K <quic_harihk@quicinc.com>
Add support to read the TME-l OEM fuse parameters from
qfprom address
Change-Id: Ia4f0766a68b67fccc59a09883dd7ef11bc970eef
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
After mibib reload kernel and rootfs info have to be reloaded using
get_kernel_fs_part_details function otherwise partitions
will be marked as bad offset
Change-Id: I9a0ec847b65ff10ec7b54b65929efd034a25d278
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
With this change, Add option to support
prefixing crash dump files with timestamp prefix
Change-Id: I30343e6d7dc58376264dd34a4a3cd25bb34e65c6
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
When xbl logs are disabled no logs came in uart console
due to gcc_blsp1_ahb_clk in disabled state.
This patch enables gcc_blsp1_ahb_clk in u-boot to avoid this issue.
Change-Id: I161b003096544e54d3d230027c2665e8fa3d0f5e
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This change creates Al02-c9 dts file to help with pci enumeration
Change-Id: I9a743de8ebbdc3f4ee43c14204ab1244e8945a12
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This patch enables support for USB 2.0 in AP-MI01.2
Change-Id: I4f848a403f3aae45a9f1cfa136781fbc7a37c35a
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
The pcie AUX clock source changed to XO as per
GCC frequency plan
Change-Id: If032831d3a9523ec214a62cbed2950ee5839920e
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
added boot type based nand or emmc flash selection.
So machid based flash selection becomes obsolete.
Change-Id: I96fa43d31d23397fa249e02f62b905d6e4e67770
Signed-off-by: Rajkumar Ayyasamy <quic_arajkuma@quicinc.com>
Bootconfig partition can have the MAGIC value 0xA3A3A1A1
if try_mode is enabled. Update the checks in smem APIs
Change-Id: I2fb71ff5812468f3f5ecd0153c35cab7d8e4bb44
Signed-off-by: Gurumoorthy Santhakumar <quic_gsanthak@quicinc.com>
Only one SFP port can be enabled at time with
either SGMII or SGMII PLUS mode.
Mode shall be specified from dts for 1G or 2.5G
support respectively. Add below change to enable
SFP as this change is not mainlined.
gmac_cfg {
gmac2_cfg {
unit = <1>;
base = <0x39D00000>;
- phy_address = <0x1c>;
- napa_gpio = <39>;
/*
* 6 - SGMII_PLUS (2.5G),
* 8 - SGMII_FIBER (1G)
*/
+ switch_mac_mode = <8>;
+ sfp_tx_gpio = <27>;
+ sfp_rx_gpio = <29>;
};
};
Change-Id: I507be2b84b1f932802659abffa3288e304e0d411
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
This patch removes the support for dumpinfo_s structure to have
uniform EBICS0 bin for both sec and non-sec boots as the Read As Zero
(RAZ) flag has been enabled to protect code and data regions of TZ
The patchset applies to all the targets except IPQ5018 as the RAZ
flag enablement was not supported in IPQ5018
Change-Id: I63514284448de08926cd2c9b741f02859067044d
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
Add support for ECO bit toggle during IPC start/stop
messages to allow BT subsystem to do self reset
Change-Id: I4d1d31a43ea8a002eb91cc42300677339c117d71
Signed-off-by: Rajkumar Ayyasamy <quic_arajkuma@quicinc.com>
This change adds cmd_dpr as a common file,
so it will be reused in the future SoC.
dpr support added in Devsoc SoC.
Change-Id: I246a8f51c07c2f6952173bbd72e327ab1119af6e
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
Adding a new command mibib_reload to
populate the partition table info from
mibib binary
Change-Id: I3f08fc07ea55f1bbd90dc28d8f459d108f86bc0e
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch eliminates to maintain seperate dts file
for mmc flash. It enables flash node based
on machine id.
Change-Id: I67d95db162630a3bc84429e8a9338097e1e24619
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
This RDP is based on AL03-C1.
The extra feature are WK03.2 – 2G+5GL in Pcie 0 &
WK01.7 – 5GH+6G in Pcie 2.
Change-Id: Ic52c71e98e1a06acf36a825d23f1d184601d153a
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
