This changes includes update the Speed clock,
common clock update and dts nodes.
Change-Id: I673e8ccf191048fef966a8f6cd84858e1a3b824f
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
Only one SFP port can be enabled at time with
either SGMII or SGMII PLUS mode.
Mode shall be specified from dts for 1G or 2.5G
support respectively. Add below change to enable
SFP as this change is not mainlined.
gmac_cfg {
gmac2_cfg {
unit = <1>;
base = <0x39D00000>;
- phy_address = <0x1c>;
- napa_gpio = <39>;
/*
* 6 - SGMII_PLUS (2.5G),
* 8 - SGMII_FIBER (1G)
*/
+ switch_mac_mode = <8>;
+ sfp_tx_gpio = <27>;
+ sfp_rx_gpio = <29>;
};
};
Change-Id: I507be2b84b1f932802659abffa3288e304e0d411
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
"list_qcn9224_fuse" command will print the OEM ID, Secure boot enable
and OEM PK hash details of QCN9224 from all attached PCIe slots.
Change-Id: I87be2f58bcef6898a00f4e179c87f2dcb93a2604
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
This change will add support for giga device GD5F1GM7REYIG
spi nand support.
Change-Id: Ie32cb6824bd0fbcf04449fa070005b7fa323c025
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This change adds usxgmii support in UNIPHY0.
Earlier it was supported up to PSGMII with 4 ports.
With these changes,
UNIPHY0 supports either of the 2 modes mentioned below.
1. PSGMII with 4 ports
2. USXGMII with 1 port
Change-Id: Ic4ca62e3ef74d275cda92d86b459d204ee4325ed
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This change adds a new command to support the qcn9224 fusing.
Fuser blower binary should be transfered via tftp to Host and
using fuse_qcn9224 command, binary can be transfered to qcn9224.
qcn9224 will take care of the fusing.
sample command:
tftpboot fuse_blower.bin
fuse_qcn9224 0
Change-Id: Ie8cd73a2d49799100bd1f717cdc4b8dad070f9bd
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
During long run tests on image download in u-boot,
EDMA crash was observed as the SKB buffer address
returned by the RX descriptor was corrupted and was
pointing to an invalid address:
clean_rx: p: 14 c: 0 skb: 61763b10
WARN: src_info_type:0x0. Drop skb:61763b10
The reason for corruption seems to be the RX buffer allocation that was
happening twice before initiating the EDMA for the next transaction.
This change removes the additional allocation of the Rx buffer which is
not needed.
Change-Id: I4a5b404527469ff3b981749aa4e05080f55807cd
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
During long run tests on image download in u-boot,
EDMA crash was observed as the SKB buffer address
returned by the RX descriptor was corrupted and was
pointing to an invalid address:
clean_rx: p: 14 c: 0 skb: 61763b10
WARN: src_info_type:0x0. Drop skb:61763b10
The reason for corruption seems to be the RX buffer allocation that was
happening twice before initiating the EDMA for the next transaction.
This change removes the additional allocation of the Rx buffer which is
not needed.
Change-Id: I919024df8131fe87640ecc0d481b61012742efbf
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
This patch adds a new command support to detect the qcn9224 version.
Based on "detect_qcn9224" command, change configures the BAR0 on EP,
does the window mapping and reads the HW version register. Version
value will be populated in "qcn9224_version" env. Version env will
be zero if there is no qcn9224 attach.
Change-Id: I4f4477590b439f31b46cb0b895dc0d9f8279a064
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
vsi port configuration for the port 5 was missed out.
So added it.
Change-Id: I5180112786eb0a6d96ac71246beb0b39f5e166aa
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This patch adds support for active_port env. With this
change in ipq6018, the end user has an option to
enable & maintain only 1 active ethernet port. There
are no multi-port use case in U-Boot and when multiple
ports were enabled for Kernel usecases, there were some
timeout issues in some special cases during crashdump
collection.
active_port can be used to configure the port which
will be used for TFTP download/upload in u-boot in
those setups. Example: To set Port2 as active_port
following command can be used:
setenv active_port 2 && savee
Note that, the active_port range is from 0 to 4 (there
are a total of 5 ports in ipq6018).
Change-Id: I5e41269ebab8eef96efeeb65f1324cacc9d56710
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This patch adds support for active_port env. With this
change in ipq807x, the end user has an option to
enable & maintain only 1 active ethernet port. There
are no multi-port use case in U-Boot and when multiple
ports were enabled for Kernel usecases, there were some
timeout issues in some special cases during crashdump
collection.
active_port can be used to configure the port which
will be used for TFTP download/upload in u-boot in
those setups. Example: To set Port2 as active_port
following command can be used:
setenv active_port 2 && savee
Note that, the active_port range is from 0 to 5 (there
are a total of 6 ports in ipq807x).
Change-Id: I1840cbeb2529cb2d47547852283a215aea551a4f
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
Currently if CONFIG_QCA8084_PHY is enabled means, it will build
all qca8084 functions required for both PHY & switch mode. But,
some ipq devices might uses anyone of them. So, add configs to
seperate the PHY & switch mode and define it in corresponding
defconfig file as per the need.
Also, some of the qca8084 functions will be used only for debug
purpose, those functions are moved under the config QCA8084_DEBUG.
Thereby, we can save some space in the u-boot.
Change-Id: I7e5f53869629a0c7cbbb12daf04ed782c9693623
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This size of clock identifier string is large, so which
in-turn reflects in the size of the qca8084_clk object file,
and thus increase uboot size. By reducing the clk identifier
string size, we can save around 0.9K.
Change-Id: Ic986155b6cc2692d67e9c855928ce8039d294d3f
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
Currently, bottom level apis such as qca8084 clk and pinconf
functions are defined as inline functions, which took around
1.3K memory in the uboot. So, update those functions to non-
inline functions to save that space.
Change-Id: I2972ca80d7df80a72d4a027e790400f391546d4b
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This changes initialize non-cache buffer every time
before edma configuration.
Change-Id: I3a4f84076516feeb7b578a7543d6e68d788c8931
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
In devsoc, we have 2 ports and 2 uniphys, so removed the extra
ports and uniphy configurations from the source. Also, updated
the clock src configuration with respect available uniphys and
removed the SFP port support.
Change-Id: I557bd6d215508c190a3e733a0304873ecd02eb24
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
In qca8084 phy mode, each phy is assigned to one mac in the ipq9574,
where as in the switch mode, only mac1 will used for all the 4 ports
of the qca8084, mac2-4 will be left unused. So, updated the
logic to update the link status of the individual ports, when qca8084
is in switch mode.
Change-Id: I128c3eafb7c85c0db9d252e047457ea8820df368
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This patch renames the GCC macro which was added
for QCA8084 PHY to fix the conflict with similar
macro defined in ipq5018 platform.
Additionally, this patch also moves all QCA8084
macro definitions in MDIO driver under QCA8084_PHY
config.
Change-Id: Icd62bf260ffeae64bf67c0c1a58afb6ac4999e22
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch adds support for qca8084 PHY based
ports. Accordingly, updates the uniphy, ppe, clock
configurations as required for qca8084 ports.
Change-Id: I2e687c10adba579b0d47d8f5b529fe920b7d0d7c
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch adds initial support for qca8084 PHY
which is based on qca8081 PHY.
qca8084 PHY has support for 4x2.5G.
Change-Id: Ic767c19fad050e5ee9a97ad7fa50c1b6b27893dd
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
The PCIE node is disabled by default in
the emulation platform
Change-Id: I51041186a57d08b58c1f7c85dd1a90fbeb24aac9
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This patch adds support for active_port env. With this
change in ipq9574, the end user has an option to
enable & maintain only 1 active ethernet port. There
are no multi-port use case in U-Boot and when multiple
ports were enabled for Kernel usecases, there were some
timeout issues in some special cases during crashdump
collection.
active_port can be used to configure the port which
will be used for TFTP download/upload in u-boot in
those setups. Example: To set Port2 as active_port
following command can be used:
setenv active_port 2 && savee
Note that, the active_port range is from 0 to 5 (there
are a total of 6 ports in ipq9574).
Change-Id: Ia2fc58abda7640f67afadfa01d0a5994aa48ea51
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
Added support for multiple i2c alias in device-tree
so as to enable multiple qup i2c modules.
Change-Id: I58b1b91c66e3b42cc5d603ce29f94e90b6d86ae1
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
The ring/desc's used non-cached memory which cannot
be free'd. Remove these free API's.
1 MB of memory is marked as non-cached and that is used
for EDMA rings/desc's and the same needn't be free'd. It
will be re-init each time during edma init.
Change-Id: Iac1e616db7c929d640c559024e4f65c6ad515400
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch moves the qca8075 phy inits inside the
config. Without this patch, when we disable the
QCA8075 config, then there will be compilation
errors.
Change-Id: Ibed0517c52f896f2af54773aa31260068e116479
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch removes the redundant udelay's and
ipq_mdio_wait_busy calls which in turn reduces
the overall AQ FW Load time.
Change-Id: I31f3a940d743528ed212e8cccab522ac249a5a5a
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This changes initialize non-cache buffer every time
before edma configuration.
Change-Id: If7692f9671f6b63f19ae38326bd76320c54766cc
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
