This change is ported based on commit b83c56c4d4
Change-Id: Ia4cdf26368d238ea3fcdb808f1446f010408a78c
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
This command helps to debug the phy issues.
Change-Id: If8354d6826795d9ef9d44112582d3b911963bda5
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Enable the PPE tx_mac only if the phy link is up else disble
the PPE tx_mac.
Change-Id: I7226a104fa287f8378b98923a00d0caa3f91079d
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
using nand command will change the default nand device to 1. This will
try to read the nor patitions so one if user tries to read the nand partitions.
Change-Id: Id73e89f479b5735fd5b28a871680190f48a76f0e
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
SGMII channel 0 is used for uniphy instance 1 and 2,
so set the SG_MODE for uniphy instance 1 and 2. Channel 0,1
and 4 are used for instance 0. So set CH1_CH0_SGMII and
CH4_CH1_0_SGMII for channel 1 and 4 respectively.
Change-Id: Ie6f0afa6419a9895f730c89fa27fb80b122acf73
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
MDIO clock divider is set to 0x7 (counts to 8)
to produce 12.5MHz (100MHz/8) MDC frequency.
Change-Id: Ic7969aebf9fcbb14601ba8e56563959ab0b25657
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
The EDMA HW is unable to process packets less than MIN_PKT_SIZE(33) bytes,
then the EDMA stalls. This is to pad the packets up to MIN_PKT_SIZE.
Change-Id: I473831a759ad6a764fefa095cf7ab347ba95ee97
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
ipq40xx, ipq807x hardware share the qca8033 phy. So the qca8033 phy
driver has been moved to common directory for use by both the
hardware.
Change-Id: Ic972f00770c9e3cbaf4d727df21f19cd926ddce2
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
This patch added the uniphy interface mode and port mux select
for PSGMII and SGMII.
Change-Id: I26f18a855b9972a358583d706d3f8a8bf09401cc
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
ipq40xx, ipq807x hardware share the qca8075 phy. So the qca8075 phy
mdio, driver has been moved to common directory for use by both the
hardware.
Change-Id: Id6e9342438ffbdf8599860df6fbb39bba30429b3
Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
Added the ipq807x ethernet edma, ppe driver support
Change-Id: Ibcac04d8a60c1ca74549834b70735a6f15b58358
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Added the ipq807x ethernet edma, ppe, gmac driver support
in the u-boot
Change-Id: I1d8ddd19f2c3d3765adda2253d3b71876142aa59
Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
As the U-boot source is going to be common between ARM and MIPS
architecture , it is required to pick only the files specific
to the respective architectures during the build.
So, move the qca arm target specific common files to another
sub level by specifying the ARCH arm.
Change-Id: I06b538834109981f21fef6270bfb8e437a2f5a7e
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
1. Added ethernet support for DB149
2. Added gmac_gpio node to aliases, to make
it common across the boards
Change-Id: I18a3d3ebaac993635830d36bd7c51f91ebd6749b
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
