This RDP is based on AL02-C6.
The extra feature is W5GL-4 in Pcie 1.
In U-boot, RDP is based on AL02-C4 as Interface enablement
is same as AL02-C12.
Change-Id: If81b5950d02b47c021aea3d52fdf5feb3fcb7035
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This is RDP is based on AL02-C4. The extra feature is Alder 2G.
Change-Id: I175938c886c0ebd8f39659ba28be2a946d5b7494
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
The PCIE node is disabled by default in
the emulation platform
Change-Id: I51041186a57d08b58c1f7c85dd1a90fbeb24aac9
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This change adds support to enable multiple I2C bus on all IPQ
platforms. Removed the device specific changes and updated in
a generic way to support multiple I2C on all the IPQ platforms.
Change-Id: Ie13dd744c6317fc9245bc88781e79a9fb3621a62
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
AL02-C9 is similar to AL02-C6 without internal radio
Features: Split Phy WKK (2G + 5G), Split Phy WKK (5G + 6G)
Change-Id: I637123bc133243f20dfc0fddb7353caad8650c3a
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This changes add support for uboot base files.
Change-Id: I5f4b937dec30a27ec6acce6ceada7fbed5d5a41d
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
AL02-C8 is based on AL02-C4. Instead of QCA8075, QCA8084 is used
for Ethernet.
Change-Id: I70e3560461c1a547c40f5b9b839cc94ef2a39520
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Setting this bit will not allow PPE to take any action on the
packets. Remove this configuration as its not needed in U-Boot
EDMA.
Change-Id: I45cb93a4f5072dd882179eca5a14bc4a25624f26
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
AP.AL02-C7 is similar to AP.AL02-C4 with emmc boot
Features: WK 2G + WK5G + WK 6G
AP.AL02-C8 is similar to AP.AL02-C6 with emmc boot
Features: Internal 2G +WK 5G + WK 6G
Change-Id: I31d1f65b071dfddc4eee393d292add58d3ddeadc
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
Currently, if atf env is set in the secure board. secure boot
sequence gets bypassed. This is not an expected behaviour. So,
removed support the atf env variable. Instead atf enabled status
can be verified using get_secure_state scm call.
Moreover, as per current design get_secure_state scm call will
not be implemented in ATF in future as well. If its implemented,
Bit 7 should be made to 1.
Change-Id: I0adcfac7bbcb10fe6906fd8a3f10a440ec7080ae
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This patch updates the following:
1) Initializes I2C QUP clocks in U-Boot itself as required
without depending on SBL.
2) Removes all CONFIG_IPQ9574_RUMI references.
Change-Id: I1fb02861a70bd2b024122fff7810c3373cc2e1cd
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
The features are similar to MP03.1 RDP.
The only difference is PINE in lane 2 is replaced by WKK.
Change-Id: Ifa83c640307081e2511ab5d8728871a8344207c4
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This change will read the 0:ART partition for calibration data and
apply it to the appropriate registers.
Following sequence added for the same.
1. created scm_read call to read the protected register.
2. added function to read data from ART partition of all flash types
3. added function to apply data to the Caldata register.
Change-Id: I4c769be3cdf664e4c59159851cc211fca53c0f27
Signed-off-by: Ignatius Michael (Jihan) Jihan <quic_mignatiu@quicinc.com>
Add failsafe boot support to recover from system hang.
Signed-off-by: anusha <anusharao@codeaurora.org>
Change-Id: I49e28a4e88aa16e564065d06f8701dc4f6cb3555
This patch optimizes and updates the EDMA Driver as
required for ipq9574 platform similar to the Kernel
Host EDMA Driver.
-> Config TX_MOD and RX_MOD timers
-> Config DMAR_CTRL
-> Config Service code bypass for TX_DESC
-> Update the SRCINFO and DST_PORT configs
-> Make changes to include secondary and primary DESC's
into the same corresponding ring structure
-> Increase the TX_BUFF Size to 2048
-> Update to use RX_DESC RING 23
-> Remove unused fields from the EDMA structures
-> Update the description for the EDMA structure fields
Change-Id: I3f7f1c11cdd87687c38774a4930c9bee90857203
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
When a long string (>255 char) input given to uboot console, RX
stale timeout occurred on UART subsystem due to RXFULL. This in-turn
cause uboot console to stuck.
So, Added a check to catch this scenario and re-start the UART RX
if it occurred.
Change-Id: Ic80c1d5f1178bf2455385c3888a2023ce1dbf6fa
Signed-off-by: Ram Kumar D <ramd@codeaurora.org>
Include SCM call to inform TZ whether HLOS boots from
primary or secondary partition
Change-Id: Ib1fa2b3c12762d1deed5b99f025c83870c142fa6
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Updated the source from gpll0_out_aux to gpll0_out_main
Change-Id: Iecaefbe03c02286823d1a67ea53b180bfd8d948e
Signed-off-by: anusha <anusharao@codeaurora.org>
Updated mock_utmi_clk to 24 MHz and use appropriate clock period.
Change-Id: I080d1d7e544b97d1911dfdc597f44fcb37a7d906
Signed-off-by: Praveenkumar I <ipkumar@codeaurora.org>
This patch updates the following:
1) Removes unnecessary TIMER and THRESHOLD configurations in EDMA
2) Adds Uniphy Clock deinit and init in eth_init (during each ping
& speed change)
3) Removes preheader configurations and calculations from EDMA
as there are no preheaders in ipq9574 platform (Instead there is
a secondary descriptor)
4) Add sufficient delay after uniphy reset
5) Remove CONFIG_IPQ9574_RUMI macro from network drivers
6) Change default mac_speed to 0
7) Fix the ppe sched. and tdm configuration
8) Reduce the block size to 1280 + headers for tftp (around 1326)
for timebeing without which timeouts were observed randomly during
TFTP (Note that the MTU is 1514 bytes)
Change-Id: I4004adfb2ae0dc98d65e458c15dafcff6523744b
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch sets the function select as mdc_mdio and also
adds AQUANTIA, QCA80xx PHY ASSERT and DE-ASSERT support.
Change-Id: Ib606b51342df4e80d705271cc661f6fbe1664ed0
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org
Updated the data FIFO size to work with 4K page as well.
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: I5d94e50755b0934d1dd6c9c0d2c6759a782f52d5
This patch updates the address of the EDMA registers, removes
registers which are not used and then does the required changes
to accomodate the new EDMA Descriptor format.
This patch also does the required changes to accomodate Secondary
Descriptor which is added instead of preheaders in ipq95xx.
We have also updated the number of descriptors per ring to 128
with this patch and have also moved the configs not required for
EMU Platform to !CONFIG_IPQ9574_RUMI.
Change-Id: I6e98c457d76c66f87b74cc0eafa7088d0081f533
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
