This is required to blow the fuses in QFPROM using data at sec.dat file.
Fuseipq command is invoked with the address of sec.dat file as argument.
Fuseipq invokes scm_call to carry out this action.
Change-Id: Ib73ba61da7ad339859c4b7b4ea2378650cd96fbf
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
This change initializes the CPU PLL , configures the
timer, DRAM & enables the serial console for the
AP152 target.
Change-Id: If2a6884813250c09a856c3cb2e1783bf3940619c
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
1. Added ethernet support for DB149
2. Added gmac_gpio node to aliases, to make
it common across the boards
Change-Id: I18a3d3ebaac993635830d36bd7c51f91ebd6749b
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Updated serial init to look for console property in aliases instead of
directly looking for serial node. This is to support device tree to
contain multiple serial nodes with different unit address to support
boards using different gsbi peripherals.
Change-Id: Iae741d7e56464a2a43f9132dfe87af62945ce60e
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
On applying 'reset' command on u-boot, it enables the watchdog
with a default reset value. CPU will reset after the set value.
Change-Id: Idee257e6fcdf576e5209066fabeb76340465c25e
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Inserted soc_version to configuration string
to support soc versions v2.0 and v3.0.
Change-Id: Ifbd92175312df15cb3adf250f964aa156bd33f71
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
In ft_board_setup,
1. Added ipq nand device qcom,qcom_nand to mtd nodes list.
2. The maximum size of mtdparts used is 4096. Hence,
updating MTDPARTS_MAXLEN to match this value.
Change-Id: Iede752ddf72c410c6f4a6f828d8c2caef90cbf09
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Modified board Makefile to avoid compilation of env.c when
"CONFIG_ENV_IS_NOWHERE" is enabled.
Change-Id: Ie694276c9071ad17f378a9926d78aa5a6e39a449
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
1. Modified common bootipq command file to support IPQ806x.
2. Modified common board initialization file to support IPQ806x.
Change-Id: I1fdd93037b885eefea0c5ddede9436861dd485b3
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Only ipq40xx and ipq807x specific functionalities were
available in common SMEM. Made ipq806x specific changes
so that all QCA platforms can use this.
Change-Id: I00fc9c9ba8e2545d665c9791849d82e0ab5d974a
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Adding a common file fdt.c and moving fdt fixup related routines
to this file to keep them generic.
Change-Id: I863135fc79f52eb35789605b8e240c637db0e02a
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Adding a common file env.c and moving env related routines to this file
to keep them generic.
Change-Id: I4541b30278289fa519f78e93d6ccddf22fda0f0c
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Adding a common file board_init.c and moving board initialization
related routines here to keep them generic.
Change-Id: I0694d8db9d7c5a7f745c623d12551bf112f11b78
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
This change eliminates the use of gboard_param
variable. Subsequent changes will make use of
dts.
Change-Id: Ic79a72c4fa1b86e864b55306a32c110bcfbc9184
Signed-off-by: Akila N <akilan@codeaurora.org>
Moved the clock header files into include folder to
escape from relative paths.
Change-Id: I776141741296e1138e45efb069479a0e26b4855c
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Added device tree based IPQ common GPIO driver.
Updated device tree with uart_gpio data.
Change-Id: I4752609a766716d3bdd97f6ca1c1c20ffa3caa47
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Modified common serial driver to work for all AK, DK and HK boards.
Made the driver more generic. The board specific
configurations are moved to respective board.c files.
Change-Id: I8aa0001d215126eb1dd15d75d6ab3f9139d6f919
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Moving cmd_bootqca.c from architecture specific common directory to
board specific common directory.
Change-Id: I453abeb554572bf2363a959e7dbe32efcf7dbac6
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Added dts and initial board support for ipq806x.
Change-Id: I33992413905a0399ea3d6dfbd606c8e7ec30b6bf
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Set mtdids environment variable based on the boot flash so that right
set of mtdids is patched to kernel device tree.
Change-Id: If2f063e51a6bb73f3e8197fb133e0399b0b4df18
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
The clock routines specific to ipq807x will
live in clock.c.
Change-Id: I4bb0b5a28ff95d08fab7913ca89ffbe1882ba72f
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Diagnostics support includes read, write and probe
commands.
Change-Id: I899be70b69c5965e72ae413b913e4f837ffc9f40
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Sets qpic-nand base address by reading from device tree using the
compatible string
Change-Id: I6e23ea579d9472fc9c977f9b549c312d61e9402b
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
