Enabled to set multiple ethernet mac addresses
from ART partition into u-boot environment which
in-turn will be patched-up into the kernel dts.
CONFIG_IPQ_NO_MACS should be set accordingly.
Change-Id: I72d1324789685d25adcb3f5c4fb1b54151098f62
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Added fdt-fixup for patching RPM version string
to kernel device-tree that may be required for
test automation and build component information.
Change-Id: I6dedecbe17ecea1a211e3d0a8d64aa1f3835f821
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Kernel fw_env config has statically defined env size
to 256KB on NAND and eMMC and 64KB on NOR flash which
requires u-boot also to be configutred the same way.
This change configures env to support differnt env sizes
and preserves the APPSBLENV and avoids CRC mismatch.
Change-Id: I55f33c17953beb8e97ebe89f215549b6eefc1a48
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
By default, u-boot enables write protection to
environment variable 'ethaddr'. However, we need
it configurable by the software.
Defining CONFIG_ENV_OVERWRITE enables this feature.
Change-Id: I1f17ce7769dc09ef42cfb09933e01a1bd5f2bb86
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Initialize ethernet module only if network communication is needed.
This change is introduced to save the boot up time of the AP.
Change-Id: I318a3e897fe511accef37667af1a6c46ae31db6e
Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
ipq40xx, ipq807x hardware share the qca8075 phy. So the qca8075 phy
mdio, driver has been moved to common directory for use by both the
hardware.
Change-Id: Id6e9342438ffbdf8599860df6fbb39bba30429b3
Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
Added the ipq807x ethernet edma, ppe driver support
Change-Id: Ibcac04d8a60c1ca74549834b70735a6f15b58358
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
This patch enables qca_mmc driver and
also has the changes required for emmc
support
Change-Id: Icc8d807caffced79d6ca576fe6220c522ebda3f7
Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
Changes to use the C Flags pushed by the openwrt package directly
from within the qca953x target sources is done.
Change-Id: Ib66cdf88ccef33e7805cc7a6831200502d7f1c23
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
Changes to use the C Flags pushed by the openwrt package directly
from within the qca956x target sources is done.
Change-Id: I4bacf9eb23ed442413d4b4f0833e8d1143aea77f
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
Changes to use the C Flags pushed by the openwrt package directly
from within the qca955x target sources is done.
Change-Id: I4f9e6a3e4e919ab01399a803349e79f57573988d
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
Added the ipq807x ethernet edma, ppe, gmac driver support
in the u-boot
Change-Id: I1d8ddd19f2c3d3765adda2253d3b71876142aa59
Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
As the U-boot source is going to be common between ARM and MIPS
architecture , it is required to pick only the files specific
to the respective architectures during the build.
So, move the qca arm target specific common files to another
sub level by specifying the ARCH arm.
Change-Id: I06b538834109981f21fef6270bfb8e437a2f5a7e
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
this change enables the support for the AP147 target
Change-Id: Ia9dd0f63578107eb127410d752598081e9be2d85
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
this change enables the support for the AP135 target
Change-Id: I772cdf3a135ac327fec21c42be6248f22d3d3f83
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
The following features are enabled ,
1) AP151 target specific configs are added ( mainly ethernet )
2) AP151 and AP152 share a common configuration file & Makefile
with minimal changes between them. Support for avoiding the conflict
between them is implemented.
Change-Id: Ia71b20199d43cd29ff214c1258e4b15fcd55cb6b
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
This patch initialize TLV and CPU context dump size,
required for crashdump collection in flash.
Change-Id: I8d729e8dbbb25159bb0b7978c7cbb08ae6043767
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
This patch initialize TLV and CPU context dump size,
required for crashdump collection in flash.
Change-Id: I960300c3ea6c97481a7c5fd551b648454c13deef
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
This patch will support storing crashdump data
in flash with the following command from u-boot.
dumpipq_flash_data <offset_in_flash>
It reads the TLV (Type Length Value) data passed
through kernel (from a DRAM location), extracts the
required information and writes to boot flash in the
provided offset.
This change provides a reference to add any other
information needed to be saved.
Signed-off-by: Akila N <akilan@codeaurora.org>
(cherry picked from commit 68ac327ce760c8a6b5ce1f35def3d0c4ccc0d00f)
Change-Id: I20517eb6e6fdb941101a3aa55af4cc4ee875779b
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
