added boot type based nand or emmc flash selection.
So machid based flash selection becomes obsolete.
Change-Id: I96fa43d31d23397fa249e02f62b905d6e4e67770
Signed-off-by: Rajkumar Ayyasamy <quic_arajkuma@quicinc.com>
This patch removes the support for dumpinfo_s structure to have
uniform EBICS0 bin for both sec and non-sec boots as the Read As Zero
(RAZ) flag has been enabled to protect code and data regions of TZ
The patchset applies to all the targets except IPQ5018 as the RAZ
flag enablement was not supported in IPQ5018
Change-Id: I63514284448de08926cd2c9b741f02859067044d
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
This change adds support to enable multiple I2C bus on all IPQ
platforms. Removed the device specific changes and updated in
a generic way to support multiple I2C on all the IPQ platforms.
Change-Id: Ie13dd744c6317fc9245bc88781e79a9fb3621a62
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This changes add support for uboot base files.
Change-Id: I5f4b937dec30a27ec6acce6ceada7fbed5d5a41d
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
Currently, if atf env is set in the secure board. secure boot
sequence gets bypassed. This is not an expected behaviour. So,
removed support the atf env variable. Instead atf enabled status
can be verified using get_secure_state scm call.
Moreover, as per current design get_secure_state scm call will
not be implemented in ATF in future as well. If its implemented,
Bit 7 should be made to 1.
Change-Id: I0adcfac7bbcb10fe6906fd8a3f10a440ec7080ae
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This patch updates the following:
1) Initializes I2C QUP clocks in U-Boot itself as required
without depending on SBL.
2) Removes all CONFIG_IPQ9574_RUMI references.
Change-Id: I1fb02861a70bd2b024122fff7810c3373cc2e1cd
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
Add failsafe boot support to recover from system hang.
Signed-off-by: anusha <anusharao@codeaurora.org>
Change-Id: I49e28a4e88aa16e564065d06f8701dc4f6cb3555
This patch sets the function select as mdc_mdio and also
adds AQUANTIA, QCA80xx PHY ASSERT and DE-ASSERT support.
Change-Id: Ib606b51342df4e80d705271cc661f6fbe1664ed0
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org
Added config, dts and initial board support code for ipq9048.
Signed-off-by: anusha <anusharao@codeaurora.org>
Change-Id: Ib4d0da9aedd5c98b02c59dd83d9efa78baada335
soc_hw_version can used to prevent cross-platform
flashing of single images to prevent board
from getting bricked.
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Change-Id: I579489498c8cbbc944b54e3050a319d1e11cb825
This change will add support for collecting crashdump as
compressed gzip file, if specified through uboot environment
variable 'dump_compressed'
Change-Id: I0c3fb16bc07aaa0103e75a551477fce13f9e26da
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
QCN3018 has only 2 cores, the kernel has to bringup
only 2 cores, hence if the SoC is identified as QCN3018
restrict the number of cores using "maxcpus" bootargs
Change-Id: Idafc44c02de302b65f9c9dfc5f77783a91b2c018
Signed-off-by: Sumit Gaur <gaur@codeaurora.org>
moving emmc related macros definitions to ipq807x & ipq40xx
board specific files from common files to avoid
redefined compilar warnings
Change-Id: Ic8d9537535a0b5439d42e8b0b53faadba72c50a3
Signed-off-by: Antony Arun T <antothom@codeaurora.org>
This change enables support to collect crashdump files
in connected usb storage device on requirement.
Change-Id: If191bcae5329dd2c9e84035069e4d9b0e73b546b
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
This change will fix the following compiler warnings for AK and DK targets.
1.Wimplicit-function-declaration
2.Wdiscarded-qualifiers
3.Wstrict-prototypes
4.Wmaybe-uninitialized
5.Wunused-variable
6.Wint-conversion
Change-Id: I364904283172ccb19602ae1b6deceb8c61ea7638
Signed-off-by: sameeruddin shaik <samesh@codeaurora.org>
We set 'fdt_high' inside 'bootipq' command.
While booting initramfs image using bootm,
fdt_high is not set causing fdt being loaded
at some random address that could be reserved
from kernel causing boot failure.
Change-Id: I769367dda8cbdf1b1b95233af52780f6d674f50f
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
This change is for mounting the rootfs partition in kernel based
on UUID(Universally Unique IDentifier). In embedded system it is
common to store rootfs on SD card or eMMC. Typically the kernel
command line has like: root=/dev/mmcblk0p20 to tell the kernel
where to look for rootfs partition. The problem in this approach
is the eMMC device number can vary based on wether the SD card
present or not in the SD card slot. Also depending on kernel version
the eMMC device number can vary. This means passing the eMMC device
for specifying the rootfs location is not robust approach.
If SD card first get detected then the base minor 0 is assigned to
SD card and kernel will try to mount rootfs from SD card and if
there is no rootfs present on SD card then kernel fail to mount the
rootfs.
Change-Id: Ia9e6dded61292bed8a10a40fd3cb86f4026393eb
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
If the dump_to_flash environment variable is set with the proper
offset in u-boot, crashdump data will be stored to flash memory.
Otherwise it will be stored in tftp server.
Change-Id: I10ac1016e3dfe6a2fa11a0a67c5774b29c3df67a
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
If crashdump magic is found, should not allow user
to access u-boot prompt as tz will be in unsecure state.
Change-Id: Icdc94c33fb87664857bafa981950f9768794cf11
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
If crashdump magic is found, should not allow user
to access u-boot prompt as tz will be in unsecure state.
Change-Id: I081e84eceada7ffe72d9b4fa4f0425535e4aabde
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
This patch enables SDHCI mode and also supports
data transfer using ADMA method.
Change-Id: Ia3187fec9024ad0972ca720cf0b9ddc6a59b906c
Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
Added a separate dumpinfo entry for
Secure boot to skip secure region.
Change-Id: Ib3836a851e8b0603a9c08013de293dcbe8e3c0fb
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
NSS-IMEM region is copied to a dynamic address
region in DRAM during kernel crash to avoid
NSS dump corruption.
This patch includes support to save the NSS dump
from the dynamic DRAM region to file in host machine.
Change-Id: I6131da890dc8bde382a3d2511ea930cd76c1f79e
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
flash_secondary_type is specific to ipq8064. Initialization of this
parameter is moved into boards specific file.
Change-Id: If1a0e44e3d0a674ce497de045d9c5095b67bc913
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
As the U-boot source is going to be common between ARM and MIPS
architecture , it is required to pick only the files specific
to the respective architectures during the build.
So, move the qca arm target specific common files to another
sub level by specifying the ARCH arm.
Change-Id: I06b538834109981f21fef6270bfb8e437a2f5a7e
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
2017-01-06 12:33:30 +05:30
Renamed from arch/arm/include/asm/arch-qcom-common/qca_common.h (Browse further)
