This changes add SKU validation support in PCI driver
the valdiation api given as weak for non SKU supported platform.
Change-Id: I32985be1e06e9cb07d28edfba50299bb7eaa3cc5
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Uniphy clk init and deinit creates additional delay in UBoot.
Falling back to Uniphy clk init during boot up and not doing
de-init during speed changes.
Change-Id: I10fb86e4b616f46c2a0c3066308e7c6a6325cf44
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the following:
1) Removes unnecessary TIMER and THRESHOLD configurations in EDMA
2) Adds Uniphy Clock deinit and init in eth_init (during each ping
& speed change)
3) Removes preheader configurations and calculations from EDMA
as there are no preheaders in ipq9574 platform (Instead there is
a secondary descriptor)
4) Add sufficient delay after uniphy reset
5) Remove CONFIG_IPQ9574_RUMI macro from network drivers
6) Change default mac_speed to 0
7) Fix the ppe sched. and tdm configuration
8) Reduce the block size to 1280 + headers for tftp (around 1326)
for timebeing without which timeouts were observed randomly during
TFTP (Note that the MTU is 1514 bytes)
Change-Id: I4004adfb2ae0dc98d65e458c15dafcff6523744b
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Previous platforms assume qca8075 phy address starts from
0. This patch adds a separate qca8075 phy driver for ipq9574
platform and handles cases where qca8075 phy addr doesn't
start with 0.
Change-Id: I59a596d692b1663af638af358335056661bdf199
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch does the following:
1) Removes unused macros and functions
2) Updates EDMA Reset address and assert/de-assert values
3) Updates Port5 and Port6 address in uniphy clock config
4) Reduces delay to 500 us in usxgmii uniphy mode set
5) Disable clearing of mac counters
Change-Id: I7cc9b20bbd4f2367d9f405ae2e5652d6236476a9
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch does the following:
1) Adds support for AQR113C_B0 and AQR113C_B1 AQ PHY versions
which will be used in ipq9574 platform
2) Adds delay of 100 ms after FW download before calling phy
init which is necessary in ipq9574 platform without which the
init doesn't happen properly as expected
Change-Id: I50be933e68598ada5e3d9df71c3e3abcc79c52d2
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the macro used for modes and also additionally
increases the delay between uniphy reset as needed for ipq9574
platform
Change-Id: Ide565e071963e17abd4f8f7e5d6270849d729b21
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the following:
1) Updates per port port mac reset
2) Updates XGMAC based on port instead of based on Uniphy as needed
for ipq9574 platform
3) uniphy_port5_clock_source_set -> If uniphy1 is not used, then
it is assumed that the first uniphy supports 5 Malibu and so accordingly
clock source is set by calling this function in that scenario
Change-Id: I978043cfa277fa02dadee5070b94f7a77ed81a5f
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch does the following:
1) Enables AQ Driver Compilation.
2) Updates malloc size to fixed value of 512 KB (size of ETHPHYFW Partition)
which is actually 1024 KB as per QSPI Nand Flash partition (considering the
bad block size also). While reading bad blocks will be skipped, and the
firmware size is not expected to exceed 512 KB and hence this size is updated.
Also note, the heap size is currently 1 MB and so if we try do malloc for 1 MB,
we might get failures during allocation.
3) Adds QSPI NAND Flash Support.
Change-Id: I5a6e19b1462b648523ce6b311128a447e34241b4
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the following:
1) Removes unused/duplicate macro: NSS_CC_PORT1_RX_CBCR_ADDR
2) Remove CMN_BLK_INIT
3) Update MAX Ports to 6
4) Rename switch_mac_mode to switch_mac_mode0 in DTS and driver
5) Fix SYSNOC frequency configuration
6) Tx/Rx descs is initialized to 0 before use which is
needed because Alder DDR is not init to 0 by default.
Change-Id: Ide22e146f9c8ecb75585d0a8d04e426c463ad8c9
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This changes add pci 2 lane support in pci driver
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia4235c277e91d68366f6ae8aa16d8505a2ca5b05
This patch updates the following:
1) Update speed clock, port mac clock reset for ipq9574
platform.
2) Handle PPE init for all 3 switch mac modes.
3) Handle port mux config when port5 is part of Uniphy0
during when Uniphy1 won't be used.
Change-Id: I23b04b00036ab139cd5877bcf913dbecb7fb7fa2
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the following:
1) Add support for 3 switch_mac_modes in ipq9574 platform.
2) Update xpcs and soft_reset as needed for ipq9574 platform.
3) Support usecase where 5*1G ports can be supported as part
of Uniphy0 during when Uniphy1 won't be used.
Change-Id: I949db117fa3c8adb937c5c055eedcaa6ead0da07
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the following:
1) Handle 2 aquantia ports during ping
2) Remove SFP Port Support Temporarily
3) Update clocks for different port speeds and different
ethernet port types as needed.
4) Update number of ports to 7 since 7 is the MAX ports
supported in ipq9574 platform.
Change-Id: I2d9040227b9c8a11cddc0d00e835ac64d3a4940d
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This change will add support for 4K Macronix spi nand
"MX35UF4GE4AD-Z4I"
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: I94e07d9e25de46c67fcb679ef149990e093afc8f
This patch moves the entire Uniphy configurations to
!CONFIG_IPQ9574_RUMI as there is no PHY/UNIPHY in EMU
Platform.
Change-Id: I404916d10caed87e4825172345195bf92df1b725
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the VSI settings. The VSI Table size has
now changes from 3 word to 4 word and the same has been
accomodated. Without writing 4 words to that Table, the VSI
writes won't be processed by the H/W.
This patch updates the scheduling, TDM configuration
and the ppe port mux configuration as required for ipq95xx.
This patch also moves the configurations not required
for EMU Platform to !CONFIG_IPQ9574_RUMI.
Change-Id: Id54e40d26e80c36e7a61642d8494c30bbd3ea2a5
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the address of the EDMA registers, removes
registers which are not used and then does the required changes
to accomodate the new EDMA Descriptor format.
This patch also does the required changes to accomodate Secondary
Descriptor which is added instead of preheaders in ipq95xx.
We have also updated the number of descriptors per ring to 128
with this patch and have also moved the configs not required for
EMU Platform to !CONFIG_IPQ9574_RUMI.
Change-Id: I6e98c457d76c66f87b74cc0eafa7088d0081f533
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This change will add support for Macronix "MX35UF1GE4AC" spi nand
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I66e82e22217d655b44e30baa64f3aefd5a5f2aaa
This change will add support for winbond "W25N02JWZEIF"
spi nand device.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I1dd258c3f0f3174d09e74fb7ffd0c26a43e6c24b
This change will add support for giga device GD5F1GQ5REYIG
spi nand support.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I57211ce34543de81216d86653a45519b97cf2fb0
