Add skip_pci_mask environment variable to skip pci enumeration
based on the bitmask. Also, removing the pci3 dts entry from
the RDP437 & RDP461 to skip pci3 enumeration.
Example - setenv skip_pci_mask 0xc
The above command will skip pci enumeration of bus 2 & 3.
Change-Id: Iff50acca07ffc026bed84a0d2372e6de0a3ba3a9
Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
Added JTAG ID, Serial number and Part type read.
Change-Id: Ia03724116230a157fc33406a97c641e3b5750d6a
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
It has the capacity of 1Gbit, i.e., 128MB, so
the number of blocks has been updated to 1024.
1Gbits = 128MB = 2048(page) * 64 (pages per block) * 1024 (blocks)
Change-Id: I552776e4e151d16782db915c3ebae874c5c02696
Signed-off-by: Gurumoorthy Santhakumar <quic_gsanthak@quicinc.com>
Added new config called CONFIG_QCA8084_BYPASS_MODE and moved
all the qca8084 by-pass mode related code under it.
Change-Id: I4157960989cd67576803d494594869265fc81745
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
Added QCA8084 by-pass mode support on MI01.1 RDP
Change-Id: I1a14729cac5463675f9cb0d15df3da76746aa81e
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
These changes update config as like below.
1.Config 100M, 1G as GMAC, 2.5G as XGMAC
2.Config MHT as XGMAC.
Change-Id: I0566f3a3d364931e8c8173c3604160f24c2439be
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
Added QCN92xx's SoC global reset and MHI reset in the fuse blow path.
So, the fuse blow can be retried after any failed attempts.
Added ANTI ROLLBACK fuse read.
Change-Id: Ibf255390ffc2086fcbfa9041dc0bcb612f8d9a4e
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
This changes includes update the Speed clock,
common clock update and dts nodes.
Change-Id: I673e8ccf191048fef966a8f6cd84858e1a3b824f
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
Only one SFP port can be enabled at time with
either SGMII or SGMII PLUS mode.
Mode shall be specified from dts for 1G or 2.5G
support respectively. Add below change to enable
SFP as this change is not mainlined.
gmac_cfg {
gmac2_cfg {
unit = <1>;
base = <0x39D00000>;
- phy_address = <0x1c>;
- napa_gpio = <39>;
/*
* 6 - SGMII_PLUS (2.5G),
* 8 - SGMII_FIBER (1G)
*/
+ switch_mac_mode = <8>;
+ sfp_tx_gpio = <27>;
+ sfp_rx_gpio = <29>;
};
};
Change-Id: I507be2b84b1f932802659abffa3288e304e0d411
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
"list_qcn9224_fuse" command will print the OEM ID, Secure boot enable
and OEM PK hash details of QCN9224 from all attached PCIe slots.
Change-Id: I87be2f58bcef6898a00f4e179c87f2dcb93a2604
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
This change will add support for giga device GD5F1GM7REYIG
spi nand support.
Change-Id: Ie32cb6824bd0fbcf04449fa070005b7fa323c025
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This change adds usxgmii support in UNIPHY0.
Earlier it was supported up to PSGMII with 4 ports.
With these changes,
UNIPHY0 supports either of the 2 modes mentioned below.
1. PSGMII with 4 ports
2. USXGMII with 1 port
Change-Id: Ic4ca62e3ef74d275cda92d86b459d204ee4325ed
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This change adds a new command to support the qcn9224 fusing.
Fuser blower binary should be transfered via tftp to Host and
using fuse_qcn9224 command, binary can be transfered to qcn9224.
qcn9224 will take care of the fusing.
sample command:
tftpboot fuse_blower.bin
fuse_qcn9224 0
Change-Id: Ie8cd73a2d49799100bd1f717cdc4b8dad070f9bd
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
During long run tests on image download in u-boot,
EDMA crash was observed as the SKB buffer address
returned by the RX descriptor was corrupted and was
pointing to an invalid address:
clean_rx: p: 14 c: 0 skb: 61763b10
WARN: src_info_type:0x0. Drop skb:61763b10
The reason for corruption seems to be the RX buffer allocation that was
happening twice before initiating the EDMA for the next transaction.
This change removes the additional allocation of the Rx buffer which is
not needed.
Change-Id: I4a5b404527469ff3b981749aa4e05080f55807cd
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
During long run tests on image download in u-boot,
EDMA crash was observed as the SKB buffer address
returned by the RX descriptor was corrupted and was
pointing to an invalid address:
clean_rx: p: 14 c: 0 skb: 61763b10
WARN: src_info_type:0x0. Drop skb:61763b10
The reason for corruption seems to be the RX buffer allocation that was
happening twice before initiating the EDMA for the next transaction.
This change removes the additional allocation of the Rx buffer which is
not needed.
Change-Id: I919024df8131fe87640ecc0d481b61012742efbf
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
This patch adds a new command support to detect the qcn9224 version.
Based on "detect_qcn9224" command, change configures the BAR0 on EP,
does the window mapping and reads the HW version register. Version
value will be populated in "qcn9224_version" env. Version env will
be zero if there is no qcn9224 attach.
Change-Id: I4f4477590b439f31b46cb0b895dc0d9f8279a064
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
vsi port configuration for the port 5 was missed out.
So added it.
Change-Id: I5180112786eb0a6d96ac71246beb0b39f5e166aa
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This patch adds support for active_port env. With this
change in ipq6018, the end user has an option to
enable & maintain only 1 active ethernet port. There
are no multi-port use case in U-Boot and when multiple
ports were enabled for Kernel usecases, there were some
timeout issues in some special cases during crashdump
collection.
active_port can be used to configure the port which
will be used for TFTP download/upload in u-boot in
those setups. Example: To set Port2 as active_port
following command can be used:
setenv active_port 2 && savee
Note that, the active_port range is from 0 to 4 (there
are a total of 5 ports in ipq6018).
Change-Id: I5e41269ebab8eef96efeeb65f1324cacc9d56710
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This patch adds support for active_port env. With this
change in ipq807x, the end user has an option to
enable & maintain only 1 active ethernet port. There
are no multi-port use case in U-Boot and when multiple
ports were enabled for Kernel usecases, there were some
timeout issues in some special cases during crashdump
collection.
active_port can be used to configure the port which
will be used for TFTP download/upload in u-boot in
those setups. Example: To set Port2 as active_port
following command can be used:
setenv active_port 2 && savee
Note that, the active_port range is from 0 to 5 (there
are a total of 6 ports in ipq807x).
Change-Id: I1840cbeb2529cb2d47547852283a215aea551a4f
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
Currently if CONFIG_QCA8084_PHY is enabled means, it will build
all qca8084 functions required for both PHY & switch mode. But,
some ipq devices might uses anyone of them. So, add configs to
seperate the PHY & switch mode and define it in corresponding
defconfig file as per the need.
Also, some of the qca8084 functions will be used only for debug
purpose, those functions are moved under the config QCA8084_DEBUG.
Thereby, we can save some space in the u-boot.
Change-Id: I7e5f53869629a0c7cbbb12daf04ed782c9693623
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This size of clock identifier string is large, so which
in-turn reflects in the size of the qca8084_clk object file,
and thus increase uboot size. By reducing the clk identifier
string size, we can save around 0.9K.
Change-Id: Ic986155b6cc2692d67e9c855928ce8039d294d3f
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
Currently, bottom level apis such as qca8084 clk and pinconf
functions are defined as inline functions, which took around
1.3K memory in the uboot. So, update those functions to non-
inline functions to save that space.
Change-Id: I2972ca80d7df80a72d4a027e790400f391546d4b
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
