This patch does the following:
1) Adds support for AQR113C_B0 and AQR113C_B1 AQ PHY versions
which will be used in ipq9574 platform
2) Adds delay of 100 ms after FW download before calling phy
init which is necessary in ipq9574 platform without which the
init doesn't happen properly as expected
Change-Id: I50be933e68598ada5e3d9df71c3e3abcc79c52d2
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the following:
1) Removes unused/duplicate macro: NSS_CC_PORT1_RX_CBCR_ADDR
2) Remove CMN_BLK_INIT
3) Update MAX Ports to 6
4) Rename switch_mac_mode to switch_mac_mode0 in DTS and driver
5) Fix SYSNOC frequency configuration
6) Tx/Rx descs is initialized to 0 before use which is
needed because Alder DDR is not init to 0 by default.
Change-Id: Ide22e146f9c8ecb75585d0a8d04e426c463ad8c9
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the following:
1) Add support for 3 switch_mac_modes in ipq9574 platform.
2) Update xpcs and soft_reset as needed for ipq9574 platform.
3) Support usecase where 5*1G ports can be supported as part
of Uniphy0 during when Uniphy1 won't be used.
Change-Id: I949db117fa3c8adb937c5c055eedcaa6ead0da07
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the VSI settings. The VSI Table size has
now changes from 3 word to 4 word and the same has been
accomodated. Without writing 4 words to that Table, the VSI
writes won't be processed by the H/W.
This patch updates the scheduling, TDM configuration
and the ppe port mux configuration as required for ipq95xx.
This patch also moves the configurations not required
for EMU Platform to !CONFIG_IPQ9574_RUMI.
Change-Id: Id54e40d26e80c36e7a61642d8494c30bbd3ea2a5
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This command helps to debug the phy issues.
Change-Id: If8354d6826795d9ef9d44112582d3b911963bda5
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
MDIO clock divider is set to 0x7 (counts to 8)
to produce 12.5MHz (100MHz/8) MDC frequency.
Change-Id: Ic7969aebf9fcbb14601ba8e56563959ab0b25657
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
ipq40xx, ipq807x hardware share the qca8033 phy. So the qca8033 phy
driver has been moved to common directory for use by both the
hardware.
Change-Id: Ic972f00770c9e3cbaf4d727df21f19cd926ddce2
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
ipq40xx, ipq807x hardware share the qca8075 phy. So the qca8075 phy
mdio, driver has been moved to common directory for use by both the
hardware.
Change-Id: Id6e9342438ffbdf8599860df6fbb39bba30429b3
Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
