In ft_board_setup,
1. Added ipq nand device qcom,qcom_nand to mtd nodes list.
2. The maximum size of mtdparts used is 4096. Hence,
updating MTDPARTS_MAXLEN to match this value.
Change-Id: Iede752ddf72c410c6f4a6f828d8c2caef90cbf09
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Modified board Makefile to avoid compilation of env.c when
"CONFIG_ENV_IS_NOWHERE" is enabled.
Change-Id: Ie694276c9071ad17f378a9926d78aa5a6e39a449
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
1. Modified common bootipq command file to support IPQ806x.
2. Modified common board initialization file to support IPQ806x.
Change-Id: I1fdd93037b885eefea0c5ddede9436861dd485b3
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Only ipq40xx and ipq807x specific functionalities were
available in common SMEM. Made ipq806x specific changes
so that all QCA platforms can use this.
Change-Id: I00fc9c9ba8e2545d665c9791849d82e0ab5d974a
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Adding a common file fdt.c and moving fdt fixup related routines
to this file to keep them generic.
Change-Id: I863135fc79f52eb35789605b8e240c637db0e02a
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Adding a common file env.c and moving env related routines to this file
to keep them generic.
Change-Id: I4541b30278289fa519f78e93d6ccddf22fda0f0c
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Adding a common file board_init.c and moving board initialization
related routines here to keep them generic.
Change-Id: I0694d8db9d7c5a7f745c623d12551bf112f11b78
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
This change eliminates the use of gboard_param
variable. Subsequent changes will make use of
dts.
Change-Id: Ic79a72c4fa1b86e864b55306a32c110bcfbc9184
Signed-off-by: Akila N <akilan@codeaurora.org>
Moved the clock header files into include folder to
escape from relative paths.
Change-Id: I776141741296e1138e45efb069479a0e26b4855c
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Added device tree based IPQ common GPIO driver.
Updated device tree with uart_gpio data.
Change-Id: I4752609a766716d3bdd97f6ca1c1c20ffa3caa47
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Modified common serial driver to work for all AK, DK and HK boards.
Made the driver more generic. The board specific
configurations are moved to respective board.c files.
Change-Id: I8aa0001d215126eb1dd15d75d6ab3f9139d6f919
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Moving cmd_bootqca.c from architecture specific common directory to
board specific common directory.
Change-Id: I453abeb554572bf2363a959e7dbe32efcf7dbac6
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Added dts and initial board support for ipq806x.
Change-Id: I33992413905a0399ea3d6dfbd606c8e7ec30b6bf
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Set mtdids environment variable based on the boot flash so that right
set of mtdids is patched to kernel device tree.
Change-Id: If2f063e51a6bb73f3e8197fb133e0399b0b4df18
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
The clock routines specific to ipq807x will
live in clock.c.
Change-Id: I4bb0b5a28ff95d08fab7913ca89ffbe1882ba72f
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Diagnostics support includes read, write and probe
commands.
Change-Id: I899be70b69c5965e72ae413b913e4f837ffc9f40
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Sets qpic-nand base address by reading from device tree using the
compatible string
Change-Id: I6e23ea579d9472fc9c977f9b549c312d61e9402b
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Fixed warnings for both ipq807x and ipq40xx
builds.
Change-Id: I69accebf525ee52f470335a14474378f5e7f65b0
Signed-off-by: Saravanan Jaganathan <sjaganat@codeaurora.org>
The SMEM is used for all the platforms like ipq40xx and ipq807x.
So moving this into a common place to use all qcom platforms.
Change-Id: I04f0bf0e7aad0eae71024d734d8049a3470d510d
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
