ATF will not have get_secure_state scm call, use it to check the ATF
status. If get_secure_state scm call is not available means,
is_atf_enabled() call will return 1. This represents that ATF is
enabled.
Change-Id: Id7d96f4e377b2ec596d6bc60c37239118817de1e
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This changes add support for uboot base files.
Change-Id: I5f4b937dec30a27ec6acce6ceada7fbed5d5a41d
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
AL02-C8 is based on AL02-C4. Instead of QCA8075, QCA8084 is used
for Ethernet.
Change-Id: I70e3560461c1a547c40f5b9b839cc94ef2a39520
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
This patch is a temporary WAR to fix timeout issues
observed in particular setups during dump collection.
This patch disables FDB Learning for ports 1-6.
Change-Id: I7987bb0286df129c56a07f1708600f78ebf42039
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
Removing this config will configure the tftp block
size to default value of 1468 + headers which is the
same as in other platforms.
Change-Id: If0b49217e5d2548be203a1a7da4000cd5f2e5dcb
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
Setting this bit will not allow PPE to take any action on the
packets. Remove this configuration as its not needed in U-Boot
EDMA.
Change-Id: I45cb93a4f5072dd882179eca5a14bc4a25624f26
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch adds a v4 platform structure adding
oem_id and product_id to the existing fields in
smem.
Change-Id: Ie25068948beda04d44b6296d48805a618638ec71
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch adds DA MAC rule. This rule can be used
if we want to drop packets with a particular DA MAC
address.
Change-Id: I32ef53ada1518f6880faa7402ccaaedb5b32a90b
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
AP.AL02-C7 is similar to AP.AL02-C4 with emmc boot
Features: WK 2G + WK5G + WK 6G
AP.AL02-C8 is similar to AP.AL02-C6 with emmc boot
Features: Internal 2G +WK 5G + WK 6G
Change-Id: I31d1f65b071dfddc4eee393d292add58d3ddeadc
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch adds ACL to drop the packets with src
mac address.
Change-Id: Ib944154ffb53b9bf67a178a5ab08cd9f12866b4a
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
Previously the MAX_NAND_PAGE_SIZE was defined as 2K
during when we will face issues when dumping to
flash in nand-4k. This patch updates the max size
to 4K to support the same in nand-4k.
Change-Id: Idcec9998f56df1db21fc03097d0454efd81bbbd3
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch packs the Al02-C4 specific system parition bin into single image,
flash mibib based on machid, use the offsets and size from the selected system
partition table
Change-Id: If645357c63c79c99a69f2b30dca31a387467fa5e
Signed-off-by: Karthick Shanmugham <quic_kartshan@quicinc.com>
Currently, if atf env is set in the secure board. secure boot
sequence gets bypassed. This is not an expected behaviour. So,
removed support the atf env variable. Instead atf enabled status
can be verified using get_secure_state scm call.
Moreover, as per current design get_secure_state scm call will
not be implemented in ATF in future as well. If its implemented,
Bit 7 should be made to 1.
Change-Id: I0adcfac7bbcb10fe6906fd8a3f10a440ec7080ae
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This change fixup the magic word (0xBAD0FF5E) instead of zero.
So the uboot will skip setting qcom,training_offset
if the serial training partition is not present in flash.
Change-Id: I0ee8c9475e1153fdbc295691ceb2a4b1d6fdd394
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
UBI32 cores are not used in IPQ9574. So, this patch power
collapses all 4 UBI32 cores.
Change-Id: I50e3d963543303440c6af288af1c874717316b35
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
This changes enables the QSPI_LAYOUT_SWITCH config
which is required for QSPI nand 4k support.
Since SBL must be flashed in 2K layout to support
QSPI Nand-4K, this dynamic switch is required.
Change-Id: I95a68ec9238dd83306322bc57cf93b162e3179f5
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This patch updates the following:
1) Initializes I2C QUP clocks in U-Boot itself as required
without depending on SBL.
2) Removes all CONFIG_IPQ9574_RUMI references.
Change-Id: I1fb02861a70bd2b024122fff7810c3373cc2e1cd
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch updates the default uniphy mode to SGMII
for the qca808x ports. If suppose, the phy is capable
of supporting 2.5G, then it will reconfigure the
uniphy mode to SGMII_PLUS at that time based on the
link speed detected.
Change-Id: I56692b19536e71cbcf3a4c31d32ecb29866c5fdc
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
