This change will add support for 4K Macronix spi nand
"MX35UF4GE4AD-Z4I"
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: I94e07d9e25de46c67fcb679ef149990e093afc8f
This patch moves the entire Uniphy configurations to
!CONFIG_IPQ9574_RUMI as there is no PHY/UNIPHY in EMU
Platform.
Change-Id: I404916d10caed87e4825172345195bf92df1b725
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the VSI settings. The VSI Table size has
now changes from 3 word to 4 word and the same has been
accomodated. Without writing 4 words to that Table, the VSI
writes won't be processed by the H/W.
This patch updates the scheduling, TDM configuration
and the ppe port mux configuration as required for ipq95xx.
This patch also moves the configurations not required
for EMU Platform to !CONFIG_IPQ9574_RUMI.
Change-Id: Id54e40d26e80c36e7a61642d8494c30bbd3ea2a5
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the address of the EDMA registers, removes
registers which are not used and then does the required changes
to accomodate the new EDMA Descriptor format.
This patch also does the required changes to accomodate Secondary
Descriptor which is added instead of preheaders in ipq95xx.
We have also updated the number of descriptors per ring to 128
with this patch and have also moved the configs not required for
EMU Platform to !CONFIG_IPQ9574_RUMI.
Change-Id: I6e98c457d76c66f87b74cc0eafa7088d0081f533
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This change will add support for Macronix "MX35UF1GE4AC" spi nand
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I66e82e22217d655b44e30baa64f3aefd5a5f2aaa
This change will add support for winbond "W25N02JWZEIF"
spi nand device.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I1dd258c3f0f3174d09e74fb7ffd0c26a43e6c24b
This change will add support for giga device GD5F1GQ5REYIG
spi nand support.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I57211ce34543de81216d86653a45519b97cf2fb0
Added config, dts and initial board support code for ipq9048.
Signed-off-by: anusha <anusharao@codeaurora.org>
Change-Id: Ib4d0da9aedd5c98b02c59dd83d9efa78baada335
This change will change serial training data read to one complete
page instead of 64-bytes read. Partial page read will cause some
data curroption issue if read request failed so read one complete page.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: Ibad101f096440e5dc10dfb4b3329a0aa6bddee7d
This change will fix proper clock source macro in set_clk_rate function.
Currently we are passing the wrong value to qpic_set_clk_rate for clock
source.
wrong:
qpic_set_clk_rate(IO_MACRO_CLK_200_MHZ, QPIC_IO_MACRO_CLK, NAND_QSPI_MSTR_CONFIG);
The last argument should be clock source not register base address.
correct:
qpic_set_clk_rate(IO_MACRO_CLK_200_MHZ, QPIC_IO_MACRO_CLK, GPLL0_CLK_SRC);
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: Ie9e07c253220924fd0c9287f7f0e2c5d42351128
After reading data from mmc, dest pointer will point to
the end address. To calculate the start of dest pointer
number of bytes copied has to be subtracted.
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: I24610a3b3bb498c4ee4ebba58e557d109c6af1ef
After reading data from mmc, dest pointer will point to
the end address. To calculate the start of dest pointer
number of bytes copied has to be subtracted.
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: I24610a3b3bb498c4ee4ebba58e557d109c6af1ef
This change will fix memory leak problem in serial training.
For serial tarining we are allocating memory to hold the training
pattern buf. For any failure we are freeing the buffer but due to
wrong lavel used memory was not getting freed due to this memory leak
problem is happening.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I35ffd27df9b24ea53aed9e9f0623d8890ba66f06
This change make the qca_8337 switch initialization generic based on
dts irrespective of gmac controller.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I292992307ead2cd7bbb0763ff483dc16c266d417
This change fix Access violation created by APPS
master by accessing QPIC_XPU issue due to accessing
QPIC_QSPI_MSTR_CONFIG & QPIC_NAND_FLASH_SPI_CFG registers
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ibb840db12359eea01823dd7732fcb1ac1e7b8967
This change will fix erase address configuration for QSPI
nand devices whose density is beyond 128MiB.
To erase a block as per datasheet of serial nand device
page row address <5:0> and the Block row address <16:6>.
In code we are forming directly pages address starting
from <16:0> i.e 17-bit address. Currently we are configuring
address_0 and address_1 register as follws.
addr0 = (page << 16) and addr1 = 0x0;
This logic will work if device size upto 128MiB, but if device
size beyond 128MiB then this logic will fail becasue upper most bit
will go out of add0 register.
Fixing this by changing address configuration logic for erase block.
addr0 = (page << 16) addr1 = (page >> 16) & 0xffff;
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I4950bb611780257629491ffbb42c91fcfedebc58
This changes add CONFIG_CMD_NAND flags in flash command and smem
source file to eliminate nand specific source if CONFIG_CMD_NAND
is not defined.
This changes replace CONFIG_IPQ_MTD_NOR with CONFIG_MTD_DEVICE flag
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I612ae89c3730dc86f2693088fb4cb5c10763165d
This changes add 8033 phy support in MP02.1(Ap & Db) RDP
in tiny nor flash
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ib35faba4321c70fed007c923ff0f5e618fad0276
This changes remove the phy_name from all mpXX dts and
handle by driver itself.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia2d0379151db0c68a0b28f5062e83f80579d37c1
This changes removes NAPA support from tiny U-boot config
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I057064d63a3ac0788275a4572242cc251a445a98
