The features are similar to MP03.1 RDP.
The only difference is PINE in lane 2 is replaced by WKK.
Change-Id: Ifa83c640307081e2511ab5d8728871a8344207c4
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
Currently, FDT fixup is happening after the initialization of the
driver model. But, it has to be done before that, otherwise, FDT
offsets configured in the drivers gets changed,
So, do ipq_uboot_fdt_fixup before driver model gets initialized by
calling it from board_fix_fdt. While at it, enabled the
CONFIG_OF_BOARD_FIXUP config in the required ipq specific defconfigs.
Change-Id: Ib05b9ab33b11716d5ca8db4afd6810e37982a443
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
Previous platforms assume qca8075 phy address starts from
0. This patch adds a separate qca8075 phy driver for ipq9574
platform and handles cases where qca8075 phy addr doesn't
start with 0.
Change-Id: I59a596d692b1663af638af358335056661bdf199
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Now, the linux-5.4 image is LZMA compressed enable the LZMA
decompressor support.
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Change-Id: Ibfc0d1fb6ffc463182f944bea0aa1d76af7d57b5
Added config, dts and initial board support code for ipq9048.
Signed-off-by: anusha <anusharao@codeaurora.org>
Change-Id: Ib4d0da9aedd5c98b02c59dd83d9efa78baada335
Linux-5.4 images are compressed with LZMA. So enable the decompressor
support for the same.
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Change-Id: I537c238fbab182e78e307ecb95bd47c0c9f9e8f5
Linux-5.4 images are compressed with LZMA. So enable the decompressor
support for the same.
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Change-Id: I537c238fbab182e78e307ecb95bd47c0c9f9e8f5
This change add tiny_debug config for ipq5018, this config
duplicates the tiny config with additional nand support.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I1acaa0159563144e6410f3ed6f0fc2a490b4e26c
This changes remove the below given list of features from tiny nor.
CONFIG_CMD_BDI
CONFIG_CMD_CONSOLE
CONFIG_CMD_EDITENV
CONFIG_CMD_FLASH
CONFIG_CMD_MII
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I6fc92ece0f61f1cd26f423009cf698117895febc
This changes add CONFIG_CMD_NAND flags in flash command and smem
source file to eliminate nand specific source if CONFIG_CMD_NAND
is not defined.
This changes replace CONFIG_IPQ_MTD_NOR with CONFIG_MTD_DEVICE flag
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I612ae89c3730dc86f2693088fb4cb5c10763165d
This changes add 8033 phy support in MP02.1(Ap & Db) RDP
in tiny nor flash
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ib35faba4321c70fed007c923ff0f5e618fad0276
This changes removes NAPA support from tiny U-boot config
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I057064d63a3ac0788275a4572242cc251a445a98
This config changes removes unwanted config and add
RUN command support
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I1a5a1ec8e9b03b53ee57a454c60b0c2d9111fad9
This code update add support in tiny spi-nor flash
for uncompressing the ART partition and read
the mac address.
This support GZIP and LZMA compression
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I699cebeb98748116ab7e3b1412d33562a4aa9d6d
This changes remove nand command and Env support
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I6c59f8259306ef79499420afe4da17a2674e98be
This code changes remove initializing nor as sudo NAND in mtd
framework and add sf command support to read from ART partition
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I39a27a72d9ab966f95d58adb4274660e147df67c
LZMA usually performs better than gzip in terms of compression
ratio, IPQ5018 has small flash memory and hence the lzma support
is enabled defining the CONFIG_LZMA define.
Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
Change-Id: Ib07abe85206f011c637c61a7c00d8d3788120a41
This changes enable ipq5018-tiny arch config which support
ipq5018 standard board files but support only particular dtbs
This change mainly removes eMMC, Pci ,I2C & UBI command and
additional features support
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I4c92c77094d7fbc23b979f0c65f650cc89c28715
This eMMC flash controller support only 4-bit
Update sdhci driver to support 4-bit mode.
Change-Id: Iddaa0807b7cf339fcfa5add0b96955757b33c716
Signed-off-by: Vandhiadevan <vkarunam@codeaurora.org>
In tiny u-boot variant, PCI, USB and Aquantia Phy support
has been disabled.
Change-Id: I3057839ed9756755a8bd77bc8d208880dbce4c5b
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Moved Aquantia, QCA8033, QCA8075 and QCA8081
PHY configs to defconfig.
For tiny u-boot variant, except QCA8075 all
other PHYs are disabled.
Change-Id: Iaafa848bf7d578bfa3bcdaf0cfcb815ecfef067f
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Moved PCI, USB and I2C configs to defconfig and
disabled for tiny variant to reduce image size.
Change-Id: I8dfdd75057527779e7af246bea796a22d50575fc
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
