This change set SGMII mode and force mode based on
dts entries.
Change-Id: Ideaa1bb77fe8fb37a7e6b907a987f6dcac54917f
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This changes enable both PHY and switch configure
simultaneously and also switch can be configure
to any port.
And also these changes enable dual MDIO bus support.
Change-Id: Ib86c8a15abb9a7a35aa86d87cef78ad917dd1a00
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This patch adds the XCFG configuration in HS PHY sequence
to reduce the noise in High Speed TX Eye
Change-Id: Iac430aa8bbd9ccc9a84c164578a1b6e35b3771f8
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
AL02-C17 is based on AL02-C4. This variant
enables PCie0 and PCie2.
Change-Id: I67aa500bd13ec661a43b17c4cbcd56c9a6db8abc
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
Add rootfs section to authenticate signed rootfs image
Parse the hlos elf header and get the rootfs metadata offset
Reads metadata available at the end of hlos image and write to /tmp/metadata.bin
Calculate sha384 and write to /tmp/sha384_XXXXX file
Use /tmp/metadata.bin and /tmp/sha384_XXXXX to get rootfs auth by TZ
Change-Id: Iaa4bf6b0cfbae4f4a56187f80f2873cb69550051
Signed-off-by: Ram Chandra Jangir <quic_rjangir@quicinc.com>
The CRASHDUMP RESET bit of TCSR_BOOT_MISC_DETECT Register
has to be set in the crashdump collection path before reset
from u-boot for the TZ to differentiate between the
normal reset and crashdump reset from u-boot and
to retain the crash reason.
Change-Id: Ic74cec02bf749925e599ee12205257480a234064
Signed-off-by: Priyanka MA <quic_priyma@quicnic.com>
This patch adds support to power cycle the SDX device during
the IPQ crash scenario by toggling the full_power_on and reset
gpios.
Change-Id: Ifac2db5480c13456ef50b6d779691c5bf41f21b2
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
The u-boot command fatwrite empties FAT clusters from the beginning
till the end of the file.
Specifically for FAT12 it fails to detect the end of the file and goes
beyond the file bounds thus corrupting the file system.
Additionally, FAT entry chaining-up into a file is not implemented
for FAT12.
The users normally workaround this by re-formatting the partition as
FAT16/FAT32, like here:
https://github.com/FEDEVEL/openrex-uboot-v2015.10/issues/1
The patch fixes the bounds of a file and FAT12 entries chaining into
a file, including EOF markup.
Signed-off-by: Philipp Skadorov <philipp.skadorov@savoirfairelinux.com>
(cherry picked from commit 49abbd9cc3)
Signed-off-by: Hariharan K <quic_harihk@quicinc.com>
Change-Id: Ib9c75d4553ea576cbc592f3291cfdebc45b8376b
Add skip_pci_mask environment variable to skip pci enumeration
based on the bitmask. Also, removing the pci3 dts entry from
the RDP437 & RDP461 to skip pci3 enumeration.
Example - setenv skip_pci_mask 0xc
The above command will skip pci enumeration of bus 2 & 3.
Change-Id: Iff50acca07ffc026bed84a0d2372e6de0a3ba3a9
Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This change adds an additional condition to check for empty string as
env variable
Change-Id: Ica847b7af6d28094df54677fa7423e606699f5fe
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
After mibib reload kernel and rootfs info have to be reloaded using
get_kernel_fs_part_details function otherwise partitions
will be marked as bad offset
Change-Id: I9a0ec847b65ff10ec7b54b65929efd034a25d278
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
Added JTAG ID, Serial number and Part type read.
Change-Id: Ia03724116230a157fc33406a97c641e3b5750d6a
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
This patch provides the fix for emmc apps image generation.
The partition variable value has to be marked as null
for the partitions to be skipped in apps image generation.
Change-Id: I0067c527f0de38eb513e27fadfeee2accb69f3d3
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
With this change, Add option to support
prefixing crash dump files with timestamp prefix
Change-Id: I30343e6d7dc58376264dd34a4a3cd25bb34e65c6
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This patch increases the filename size to avoid truncation while
running flash script in verbose mode
Change-Id: I245f4ee0ae83fc88de4833a178b1e1e96107f486
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This change will read calibration data from the 0:ART partition and
apply it to the appropriate registers.
Change-Id: Ic9360c0fce229c1d1867ee897b811abc56d2b1c7
Signed-off-by: Gurumoorthy Santhakumar <quic_gsanthak@quicinc.com>
This patch adds the additional conditional check to filter
out wififw images for nor flash type
Change-Id: Iba078721fbfc5ed4cd3bd74689e9ba6352a69130
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
