Added read & write bam pipe entires in all the ipq specific dtsi.
Also, updated the spi bam code with generic code changes to enable
the multiple spi support on all ipq chipsets.
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Signed-off-by: Ram Kumar D <ramd@codeaurora.org>
Change-Id: Ibcdb9d2a9ff7a25f3d296ecdb1aca403511e07d7
Disabled the cache commands config CONFIG_CMD_CACHE. This changes
removes the icache and dcache commands.
Signed-off-by: Karthick Shanmugham <kartshan@codeaurora.org>
Change-Id: I0cfd4df12e452a15861f0df7f4512234113d315a
This change will add support for collecting crashdump as
compressed gzip file, if specified through uboot environment
variable 'dump_compressed'
Change-Id: I0c3fb16bc07aaa0103e75a551477fce13f9e26da
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
Change TLV message buffer offsets to match with kernel
that has been adjusted to use last 16K of memory
allocated for crashdump buffer. This was done to
accomodate greater number of dump segemnts.
Change-Id: Idb8c1bab6a0900152a9d413382b2b3c87a19170e
Signed-off-by: Venkat Raju Sana <vrsana@codeaurora.org>
This change will fix the following compiler warnings for AK and DK targets.
1.Wimplicit-function-declaration
2.Wdiscarded-qualifiers
3.Wstrict-prototypes
4.Wmaybe-uninitialized
5.Wunused-variable
6.Wint-conversion
Change-Id: I364904283172ccb19602ae1b6deceb8c61ea7638
Signed-off-by: sameeruddin shaik <samesh@codeaurora.org>
This change will resolve the "L2 Master port decode error"
print in the Kernel log.
Change-Id: I12fd39a85093cc1d7fab336898e039a61eeb5565
Signed-off-by: sameeruddin shaik <samesh@codeaurora.org>
Rootfs's certificate is appended in kernel image. Read from
there, pack it with rootfs image and validate rootfs.
Change-Id: I2b40f88e23225c17362a02f6c7868edda2a8e8bd
Signed-off-by: Praveenkumar I <ipkumar@codeaurora.org>
The "flash" command erases given partition and
writes the image to flash.
Change-Id: I059414fd3d7eefeac0c626e1980a70985f2de986
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
-Device IO commands are not supported
-CPU down is supported by waiting in loop
-Need reboot to execute bootipq command
Change-Id: Id10eef0c8e5feb636716461c58ba1640dfe46658
Signed-off-by: Santan Kumar <santank@codeaurora.org>
Enables mmc partition protection based on read-only
attribute in GPT on ipq4019 and ip8064 platforms.
Change-Id: Ifd459eb2964a056806ce23100a7f205b46fffdb3
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
During kernel bootup, dcache is enabled to reduce boot time.
When CONFIG_SYS_DCACHE_OFF macro is defined, dcache will not
be enabled.
Change-Id: I1830b467f2948250f5e7a676dd0f16a025e7b229
Signed-off-by: Sasirekaa Madhesu <smadhesu@codeaurora.org>
Do generic flash structure initialization, for the devices
not listed in the SPI NOR flash lookup table, so that
we can access the flash even before the support is added.
Block size and density are obtained from smem.
Change-Id: I568eb538615bb36124c43a2509bcfce2e4a1188a
Signed-off-by: Balaji Jagadeesan <bjagadee@codeaurora.org>
This patch enables SDHCI mode and also supports
data transfer using ADMA method.
Change-Id: Idafb0ecd6cb3ddf28e18681f8823134be99574cd
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
dcache is enabled only during boot from flash.
During JTAG recovery, dcache_enable is skipped
to avoid cache issues in recovery environment.
Change-Id: Ie3003f67c787cbc6b88dc42017aeb2a9508d2ff9
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
This patch adds the support on nand driver to work
when dcache is on.
flush_dcache_range will do both clean and invalidate.
To avoid any data loss when an un-aligned buffer used
in RX path, before giving buffer to bam and after bam
updates the data in buffer, buffer will be flushed.
Change-Id: Ib38d68726efe1692ae94c2be1af61cf29d1c2e50
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
CONFIG_SYS_MALLOC_LEN has been increased from 256K to 2048K to
support memory requirements of MT29F8G08ABABA Micron
1GB NAND flash.
Change-Id: I7d5af023d2a8bd2a0f11b28ef75eee2f5c38f6be
Signed-off-by: Sasirekaa Madhesu <smadhesu@codeaurora.org>
This patch makes diagnostics feature configurable and
in the standard config diagnostics feature is disabled
Change-Id: Ie3ad2248446043744057a656dab03d44d1e005df
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Initialize Ethernet module only if network communication is needed.
This is introduced to save the boot up time of the AP.
Change-Id: I210f3eb911621d22f476d7927854c008cef2eb9c
Signed-off-by: Antony Arun T <antothom@codeaurora.org>
This patch enables SPI-NAND support for DK and making
chip select gpio configurable from DTS.
Change-Id: I2ca7d3021fa27da1d83e2a787a1dc626919124f8
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Enabling spi dma driver for ipq40xx. This patch
also enables rx and tx pipe configurable from dts.
Change-Id: Id6009f6e9863ab2cdf8b105461d62aa68e3d004b
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Updated number of alternate partitions and
alternate partition data structure to match
smem entry.
Change-Id: I62484e369ed3d35037237fde2d71f9af045e438a
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
ipq40xx, ipq807x hardware share the qca8075 phy. So the qca8075 phy
mdio, driver has been moved to common directory for use by both the
hardware.
Change-Id: Id6e9342438ffbdf8599860df6fbb39bba30429b3
Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
As the U-boot source is going to be common between ARM and MIPS
architecture , it is required to pick only the files specific
to the respective architectures during the build.
So, move the qca arm target specific common files to another
sub level by specifying the ARCH arm.
Change-Id: I06b538834109981f21fef6270bfb8e437a2f5a7e
Signed-off-by: Prabhu Jayakumar <pjayak@codeaurora.org>
This patch will support storing crashdump data
in flash with the following command from u-boot.
dumpipq_flash_data <offset_in_flash>
It reads the TLV (Type Length Value) data passed
through kernel (from a DRAM location), extracts the
required information and writes to boot flash in the
provided offset.
This change provides a reference to add any other
information needed to be saved.
Signed-off-by: Akila N <akilan@codeaurora.org>
(cherry picked from commit 68ac327ce760c8a6b5ce1f35def3d0c4ccc0d00f)
Change-Id: I20517eb6e6fdb941101a3aa55af4cc4ee875779b
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
1. Modified common bootipq command file to support IPQ806x.
2. Modified common board initialization file to support IPQ806x.
Change-Id: I1fdd93037b885eefea0c5ddede9436861dd485b3
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
