TCSR_BOOT_MISC_REG bits are not properly managed
for DLOAD implementation. Modify only necessary
bits to enable availability for new feature
implementations using TCSR_BOOT_MISC_REG.
Change-Id: I888a1bf6ce3654b0453c9ec2f87b4d5ff2a20de0
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
This changes remove pci phy deinit sequence and
also update the pci phy address
Change-Id: I9bae09958e395dfb509a17e472674f33fe214f1c
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This change adds usxgmii support in UNIPHY0.
Earlier it was supported up to PSGMII with 4 ports.
With these changes,
UNIPHY0 supports either of the 2 modes mentioned below.
1. PSGMII with 4 ports
2. USXGMII with 1 port
Change-Id: Ic4ca62e3ef74d275cda92d86b459d204ee4325ed
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
Same as AP.AL02-C4 RDP, with support for 10G PHY or 10G fiber in UNIPHY0
Change-Id: Ic3935a2cdc0033ed4c7478ae14abd3cf61aef797
Signed-off-by: Hariharan K <quic_harihk@quicinc.com>
This change adds cmd_dpr as a common file,
so it will be reused in the future SoC.
dpr support added in Devsoc SoC.
Change-Id: I246a8f51c07c2f6952173bbd72e327ab1119af6e
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
devsoc-01.6 and devsoc-01.7 RDPs are same as devsoc-01.4 and devsoc-01.1
respectively with 10GE SFP module instead of 2.5GE SFP module.
Change-Id: Ic65bab9126a34cb73dd51d5ce6a85e1cf29a1215
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Adding a new command mibib_reload to
populate the partition table info from
mibib binary
Change-Id: I3f08fc07ea55f1bbd90dc28d8f459d108f86bc0e
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
Enable pci1 dual lane instead of pci0 single lane
Waikiki 5G module of RDP444 will support 4X4 320M,
so this module needs to be plugged into 2L PCIe.
Change-Id: Ic6a2e77203c576759c3344d006bf6e2e1ec903ec
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch eliminates to maintain seperate dts file
for mmc flash. It enables flash node based
on machine id.
Change-Id: I67d95db162630a3bc84429e8a9338097e1e24619
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
removing the redundant initialization to reduce the size of uboot
Change-Id: I4a129bfc1bad4e402a66a1b1051d1f432a581a6e
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This RDP is based on AL03-C1.
The extra feature are WK03.2 – 2G+5GL in Pcie 0 &
WK01.7 – 5GH+6G in Pcie 2.
Change-Id: Ic52c71e98e1a06acf36a825d23f1d184601d153a
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This RDP is based on AL02-C4.
The extra feature is QCN90xx on PCIE0
Change-Id: Ic153279dbe18daf9f602bf44f0bf7539f43ba5f8
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This RDP is based on AL02-C6.
The extra feature is W5GL-4 in Pcie 1.
In U-boot, RDP is based on AL02-C4 as Interface enablement
is same as AL02-C12.
Change-Id: If81b5950d02b47c021aea3d52fdf5feb3fcb7035
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
AL02-C10 is based on AL02-C8.
C8 enables QCA8084 PHY mode, C10 is for Switch mode
Change-Id: Idbd154c66437357b5c2dbd636031af564c121cdf
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This is RDP is based on AL02-C4. The extra feature is Alder 2G.
Change-Id: I175938c886c0ebd8f39659ba28be2a946d5b7494
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
These changes update the machine id and
config name for emulation FBC bring up
Change-Id: I45bf5cafcb14025841fda2b00e8f695d810b16d3
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This patch adds support for qca8084 phy based ports
in AL02-c8.
AL02-c8 has 4x2.5 + 2x10G.
Change-Id: Ibcad3d388cd6242158944d16c1b6cd3a08ba12aa
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
In AL03, we have qca8084 support instead of
qca807X and this patch adds support for the
same.
Note that there are only 5 ethernet ports in
AL03.
4x2.5G -> qca8084 port
1x10G -> Aquantia port
Change-Id: I824169cb972dd0fbd28c7d8648df3691ca93432f
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
The PCIE node is disabled by default in
the emulation platform
Change-Id: I51041186a57d08b58c1f7c85dd1a90fbeb24aac9
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
