Since set_sgmii_mode function does not return any value, changed its
functon type to void.
Change-Id: I4f098747ed2e562488cf97dc06dbb48a54b53fc3
Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
TX and RX descriptors are 16 bytes. This causes problems with the cache
maintenance on CPUs where the cache-line size exceeds the size of these
descriptors. What will happen is that when the driver receives a packet
it will be immediately requeued for the hardware to reuse. The CPU will
therefore need to flush the cache-line containing the descriptor, which
will cause all other descriptors in the same cache-line to be flushed
along with it. If one of those descriptors had been written to by the
device those changes (and the associated packet) will be lost.
To work around this, we make use of non-cached memory if available. If
descriptors are mapped uncached there's no need to manually flush them
or invalidate them.
Change-Id: I7b8a9a55226dfdcbab49a93bcdf43af4d70c108a
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
This change enables u-boot support for AP.DK07.1-C4 configuration.
AP.DK07.1-C4 enables QCA402x IOT support
Change-Id: I5982b8f8783755b03d11c878f8108d71e6ace6d1
Signed-off-by: Gitanjali Krishna <gitanjal@codeaurora.org>
fdt_path_offset function will return zero or positive
value for success case.So fixed the return value check
accordingly.
Change-Id: Iafacdaf7c12cecdb882f3795f6145730efe938a6
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
This change is ported based on commit b83c56c4d4
Change-Id: Ia4cdf26368d238ea3fcdb808f1446f010408a78c
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
This command helps to debug the phy issues.
Change-Id: If8354d6826795d9ef9d44112582d3b911963bda5
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Enable the PPE tx_mac only if the phy link is up else disble
the PPE tx_mac.
Change-Id: I7226a104fa287f8378b98923a00d0caa3f91079d
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
using nand command will change the default nand device to 1. This will
try to read the nor patitions so one if user tries to read the nand partitions.
Change-Id: Id73e89f479b5735fd5b28a871680190f48a76f0e
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
SGMII channel 0 is used for uniphy instance 1 and 2,
so set the SG_MODE for uniphy instance 1 and 2. Channel 0,1
and 4 are used for instance 0. So set CH1_CH0_SGMII and
CH4_CH1_0_SGMII for channel 1 and 4 respectively.
Change-Id: Ie6f0afa6419a9895f730c89fa27fb80b122acf73
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
MDIO clock divider is set to 0x7 (counts to 8)
to produce 12.5MHz (100MHz/8) MDC frequency.
Change-Id: Ic7969aebf9fcbb14601ba8e56563959ab0b25657
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
The EDMA HW is unable to process packets less than MIN_PKT_SIZE(33) bytes,
then the EDMA stalls. This is to pad the packets up to MIN_PKT_SIZE.
Change-Id: I473831a759ad6a764fefa095cf7ab347ba95ee97
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
