This change checks if 0:CDT_1 partition exists and then flashes cdt.bin.
Previously, check existed only for 0:CDT. The change allows for creation
of single image with proper cdt_1 name and appends it to the single image.
With this, we can successfully use the CDT_1 alternate partition for images.
Change-Id: I100dc789b54805c699ba6f30d5cb1b74734b1bd9
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This patch updates the PCIe1 lane configuration for DB-MI01.1
and DB-MI02.1
Change-Id: I3dc15a3255d74fcbd5147b2fa6f89c184e48410b
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch updates the AP-MI04.1 PCIe configuration from
PCIe0 and PCIe1 to PCIe1 and PCIe2
Change-Id: If4aa155cc1005becd050fbc36d91d3764005c4c4
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
Previously 100M speed is not working in port 4 of MHT
by-pass mode. SGMII speed fixup required to dynamically
adjust the gcc clock based on the link-speed.
Still, this is requried only for port 4, because remaining
ports (1-3) will be taken care from switch core. So, added
speed fix for the by-mode support.
Change-Id: I495aad4b64de12ae7f57c0bdb9e0def08ad38681
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This patch adds the ethernet support for AP-MI01.3 and
removes pci nodes from dts
Change-Id: I3fcb338a061d732b44409aa835a1fde45508be95
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch adds the winbond W25N512GW and W25N02KWZEIR devices
and fixes the W25N01GWZEIG device id from 0xBA to 0xBA21,
W25N02JWZEIF device id from 0xBF to 0xBF22 and
W25N01JW device id from 0xBC to 0xBC21
Change-Id: Ic91800386446263477af06c6d39d9051a2dde3b9
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch adds the support for AP-MI01.6-QCN9160 RDP by reusing
the ipq5332-mi01.6.dts for better readabilty
Change-Id: I2776222fd80637f0111dc9074491f351cfb932b3
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch adds a condition to power cycle the
SDX based on the current status of the e911 call.
Change-Id: Id3cf50cfb49a26151c98b7d52e18b9c487cfb935
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
This patch removes WKK V1 support. Alder + qcn9000 + qcn9224 Dual MAC V2
image will be used for all qcn9224 supported RDPs and they will have this FW
as WIFI_FW type 1.
Change-Id: I59ee0e50387d99bfb7f86d54fcee792f3f677048
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
When we use root certificate count as four, then metadata
is generated with size as 0x4000, but for single root
certificate, metadata size will be less than 0x4000, hence
consider minimum metadata size as 0x1000
Change-Id: Ib713e5fd4bcfe493cf482efda54d20ca1604939b
Signed-off-by: Ram Chandra Jangir <quic_rjangir@quicinc.com>
This patch removes the support for dumpinfo_s structure to have
uniform EBICS0 bin for both sec and non-sec boots as the Read As Zero
(RAZ) flag has been enabled to protect code and data regions of TZ
Change-Id: I0508677f7dbc4040660d7dd122d7a5d79554ce60
Signed-off-by: quic_abilj <quic_abilj@quicinc.com>
This patch removes the pcie2 and usb 3.0 support in AP-MI01.2-QCN9160
Change-Id: I1c2a6c9d27f1d2c75d3be505076626396d4c9d37
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This changes updates the gcc common clk initialise
steps and adds support for obtaining bitmap
details from dts.
Change-Id: I55e895989823a4fbb97c638ad937ca48c00519c5
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This change set SGMII mode and force mode based on
dts entries.
Change-Id: Ideaa1bb77fe8fb37a7e6b907a987f6dcac54917f
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This changes skips the re-initiation of ethernet
if boot fails, preventing ethernet from becoming unstable.
Change-Id: If46a54839db9986ed158b36bf9efb81c3412c88e
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This changes enable both PHY and switch configure
simultaneously and also switch can be configure
to any port.
And also these changes enable dual MDIO bus support.
Change-Id: Ib86c8a15abb9a7a35aa86d87cef78ad917dd1a00
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This patch adds the XCFG configuration in HS PHY sequence
to reduce the noise in High Speed TX Eye
Change-Id: Iac430aa8bbd9ccc9a84c164578a1b6e35b3771f8
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
