In qca8084 phy mode, each phy is assigned to one mac in the ipq9574,
where as in the switch mode, only mac1 will used for all the 4 ports
of the qca8084, mac2-4 will be left unused. So, updated the
logic to update the link status of the individual ports, when qca8084
is in switch mode.
Change-Id: I128c3eafb7c85c0db9d252e047457ea8820df368
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This change allows autoboot to check if the app is crashed or not.
If the Kernel crashes, a crash dump is generated.
And also, with these changes, check if crash dump is disabled or not.
Change-Id: I35b0a20c6a245702ed0adcfbaa37add21a73400a
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This RDP is based on AL02-C4.
The extra feature is QCN90xx on PCIE0
Change-Id: Ic153279dbe18daf9f602bf44f0bf7539f43ba5f8
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This RDP is based on AL02-C6.
The extra feature is W5GL-4 in Pcie 1.
In U-boot, RDP is based on AL02-C4 as Interface enablement
is same as AL02-C12.
Change-Id: If81b5950d02b47c021aea3d52fdf5feb3fcb7035
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
AL02-C10 is based on AL02-C8.
C8 enables QCA8084 PHY mode, C10 is for Switch mode
Change-Id: Idbd154c66437357b5c2dbd636031af564c121cdf
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This is RDP is based on AL02-C4. The extra feature is Alder 2G.
Change-Id: I175938c886c0ebd8f39659ba28be2a946d5b7494
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
These changes update the machine id and
config name for emulation FBC bring up
Change-Id: I45bf5cafcb14025841fda2b00e8f695d810b16d3
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This changes enable fstack-protector flag for devsoc
platform.
Change-Id: I9726cf5020cbb74346a023b9f4eb8fa908bb417c
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
These changes add crashdump support in devsoc platform.
Change-Id: Ifdb9e1e65a4e93407506e987201b4ddeac753927
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This patch packs the QCN9224 specific partition bin into single image
Change-Id: I300a6774dc570d459a14eca5702cd79398248fa5
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
Update the feature to use BIT10 and BIT11 for NONHLOS
and HLOS failure detection instead of BIT9 & BIT10.
Change-Id: Idb649770da0cba63554adce861e901f582637c86
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
This patch renames the GCC macro which was added
for QCA8084 PHY to fix the conflict with similar
macro defined in ipq5018 platform.
Additionally, this patch also moves all QCA8084
macro definitions in MDIO driver under QCA8084_PHY
config.
Change-Id: Icd62bf260ffeae64bf67c0c1a58afb6ac4999e22
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This config helps to reduce the u-boot.mbn size
by approx. 135 KB's. This is required since the image
size was greater than partition size after adding
support for qca8084 PHY based ports.
Change-Id: Ie719c69690e9e7517002c0f06182bf3ab6c1f98e
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch disables unused configs to reduce
U-Boot image size. This is required since
the image size was very close to the partition
size.
Change-Id: Ibd3131cb0f579deb3d34aff6857c97ca7338af19
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch adds support for qca8084 phy based ports
in AL02-c8.
AL02-c8 has 4x2.5 + 2x10G.
Change-Id: Ibcad3d388cd6242158944d16c1b6cd3a08ba12aa
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
In AL03, we have qca8084 support instead of
qca807X and this patch adds support for the
same.
Note that there are only 5 ethernet ports in
AL03.
4x2.5G -> qca8084 port
1x10G -> Aquantia port
Change-Id: I824169cb972dd0fbd28c7d8648df3691ca93432f
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch adds support for qca8084 PHY based
ports. Accordingly, updates the uniphy, ppe, clock
configurations as required for qca8084 ports.
Change-Id: I2e687c10adba579b0d47d8f5b529fe920b7d0d7c
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
This patch adds initial support for qca8084 PHY
which is based on qca8081 PHY.
qca8084 PHY has support for 4x2.5G.
Change-Id: Ic767c19fad050e5ee9a97ad7fa50c1b6b27893dd
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
The PCIE node is disabled by default in
the emulation platform
Change-Id: I51041186a57d08b58c1f7c85dd1a90fbeb24aac9
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This patch adds support for active_port env. With this
change in ipq9574, the end user has an option to
enable & maintain only 1 active ethernet port. There
are no multi-port use case in U-Boot and when multiple
ports were enabled for Kernel usecases, there were some
timeout issues in some special cases during crashdump
collection.
active_port can be used to configure the port which
will be used for TFTP download/upload in u-boot in
those setups. Example: To set Port2 as active_port
following command can be used:
setenv active_port 2 && savee
Note that, the active_port range is from 0 to 5 (there
are a total of 6 ports in ipq9574).
Change-Id: Ia2fc58abda7640f67afadfa01d0a5994aa48ea51
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
