In EMU Platform, there is no PHY/Uniphy, clocks/resets and
by default all MACs will be configured as SGMII mode.
The first 4 ports will have GMAC and PC side link speed
should be set as 10M, RUMI side link speed should
be configured as 1000M and then last 2 ports will have
XGMAC and PC side link speed should be set as 100M and the
RUMI side link speed should be configured as 10G.
Change-Id: I2ffe2bdb9c58eeacb3f765094c2bfb89e81a5c7d
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the address of the EDMA registers, removes
registers which are not used and then does the required changes
to accomodate the new EDMA Descriptor format.
This patch also does the required changes to accomodate Secondary
Descriptor which is added instead of preheaders in ipq95xx.
We have also updated the number of descriptors per ring to 128
with this patch and have also moved the configs not required for
EMU Platform to !CONFIG_IPQ9574_RUMI.
Change-Id: I6e98c457d76c66f87b74cc0eafa7088d0081f533
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Updated the isb function for the aarch32 config to include
ISB instruction.
Change-Id: Iea2ee7934d18d6149af4032102b1677c16b9c06c
Signed-off-by: anusha <anusharao@codeaurora.org>
Added config, dts and initial board support code for ipq9048.
Signed-off-by: anusha <anusharao@codeaurora.org>
Change-Id: Ib4d0da9aedd5c98b02c59dd83d9efa78baada335
MP03.4-C1 and MP03.4-C2 RDPs are based on MP03.3 and
MP03.3-C2 respectively.
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
Change-Id: I016eb422f3628e1a7733d71754613b2fa51245f1
This RDP is the combination of MP03.1 + NAPA.
This RDP support Nor & nand flash.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia39cdf8ae21ad9800ee1c00c7af44c9bc1af03dc
This changes add Machid , USB Power gpio and enable build support.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I99e2da23f54da4d5e4edc9312f08340b88f7c59a
This changes enable pull up to drive 5V to usb
in MP03 RDP
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I43c2098c75f23a38bab221773c1dcce7c754cf39
This changes reduce spi-nor drv_strength from 8mA to 2mA.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ib21e8229fff3ce81f5da29edfb978cbe1fdc833b
This change make the qca_8337 switch initialization generic based on
dts irrespective of gmac controller.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I292992307ead2cd7bbb0763ff483dc16c266d417
This changes add additional argument for binary size
information in fuseipq.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I9ea5e3104a750377b7999a5e0475739b107b0204
This change will skip the bad blocks offsets, if any while writing
into the nand flash duirng crash when dump_to_flash enabled. This
change also verifies whether the dump data is not overwritten into
the next partition.
Signed-off-by: Karthick Shanmugham <kartshan@codeaurora.org>
Change-Id: I0eec4c772a5f5efb3c17bfd1fd3d3d9a5ff85d1d
This changes add CONFIG_CMD_NAND flags in flash command and smem
source file to eliminate nand specific source if CONFIG_CMD_NAND
is not defined.
This changes replace CONFIG_IPQ_MTD_NOR with CONFIG_MTD_DEVICE flag
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I612ae89c3730dc86f2693088fb4cb5c10763165d
Encryptio/Decryption
- For encryption/decryption, plain data/
encrypted date has to be written to memory
directly using mw command along with
ivadata, type and mode
- Implemented new uboot command "aes_256"
to receive the memory address where the
above data is written to
- Perfom basic sanity check against the data
received and send them to secure world through
scm calls
- This is supported only for HK/CYP, hence not
implemented for TZ running in 32bit mode
Change-Id: I589a15025cd248cf5792f13ea435c5c5b64c6066
Signed-off-by: Karthick Jeyaraman <kjeyaram@codeaurora.org>
soc_hw_version can used to prevent cross-platform
flashing of single images to prevent board
from getting bricked.
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Change-Id: I579489498c8cbbc944b54e3050a319d1e11cb825
This changes add 8033 phy support in MP02.1(Ap & Db) RDP
in tiny nor flash
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ib35faba4321c70fed007c923ff0f5e618fad0276
This changes remove the phy_name from all mpXX dts and
handle by driver itself.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia2d0379151db0c68a0b28f5062e83f80579d37c1
This changes removes NAPA support from tiny U-boot config
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I057064d63a3ac0788275a4572242cc251a445a98
