Added config to enable smem version C.
Updated SYS_TEXT_BASE and SMEM_BASE addresses.
Change-Id: If6cdb1dffc3ad37e0eba833cf1538487a8f3045c
Signed-off-by: anusha <anusharao@codeaurora.org>
Added config, dts and initial board support code for ipq9048.
Signed-off-by: anusha <anusharao@codeaurora.org>
Change-Id: Ib4d0da9aedd5c98b02c59dd83d9efa78baada335
This features not support in tiny nor profile,
since no CONFIG_GZIP lib support
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia6321e60f5451e60193804ef2dba22ea493b435c
Printing on console while executing multi core command causes a race
condition in serial driver and results in data abort. Disable serial
console briefly during secondary cpu bring up to overcome the race
condition and data abort exception.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Change-Id: I6b3cda3bd828cbcaf8e766f243f8137ab496a805
Printing on console while executing multi core command causes a race
condition in serial driver and results in data abort. Disable serial
console briefly during secondary cpu bring up to overcome the race
condition and data abort exception.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Change-Id: I6b3cda3bd828cbcaf8e766f243f8137ab496a805
- u-boot text region + pgtable requires
800KB. Hence adjusted text base address
to 0x4A92000, so that the text region + pgtable
fits at the last 800KB of 2MB memory space, leaving
200KB above them for other regions
- Size of Heap region is reduced to 1MB from 1.5MB
- Maple uses gmac controller for Ethernet DMA process,
which does not require non-cached memory, hence we
can avoid reserving 1MB for noncached memory and the
same can used for other components.
- Right now, 256KB of memory was used from stack
for env reloc/save functionalities which makes the
SP extend beyond 2MB. Hence, modified them to
allocate memory from Heap.
- With this patchset, the u-boot fits into 2MB space
and the rest 2MB can be used for other components
Change-Id: I962d86d81b1c52cbef575f974924d16ec6e3db89
Signed-off-by: Karthick Jeyaraman <kjeyaram@codeaurora.org>
With latest GCC 4 byte aligned instructions are getting generated for
2 byte aligned data. This is due to the option '-fstore-merging' enabled
by default for '-O2'
This is causing data abort if data cache is disabled.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Change-Id: Idaac94fcc8e5c61f0ea720ed0c10e908d3688c61
This changes initialize the CMN block with 96MHz based on
INTERNAL_96MHZ define flag otherwise it will initialize to 48MHz
This changes also enable GMAC0 & GMAC1 AXI clock.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ic7f9981394119ea95954ece49d30e36ba4bb2ebd
This changes remove the below given list of features from tiny nor.
CONFIG_CMD_BDI
CONFIG_CMD_CONSOLE
CONFIG_CMD_EDITENV
CONFIG_CMD_FLASH
CONFIG_CMD_MII
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I6fc92ece0f61f1cd26f423009cf698117895febc
This changes add CONFIG_CMD_NAND flags in flash command and smem
source file to eliminate nand specific source if CONFIG_CMD_NAND
is not defined.
This changes replace CONFIG_IPQ_MTD_NOR with CONFIG_MTD_DEVICE flag
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I612ae89c3730dc86f2693088fb4cb5c10763165d
Encryptio/Decryption
- For encryption/decryption, plain data/
encrypted date has to be written to memory
directly using mw command along with
ivadata, type and mode
- Implemented new uboot command "aes_256"
to receive the memory address where the
above data is written to
- Perfom basic sanity check against the data
received and send them to secure world through
scm calls
- This is supported only for HK/CYP, hence not
implemented for TZ running in 32bit mode
Change-Id: I589a15025cd248cf5792f13ea435c5c5b64c6066
Signed-off-by: Karthick Jeyaraman <kjeyaram@codeaurora.org>
This changes add 8033 phy support in MP02.1(Ap & Db) RDP
in tiny nor flash
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ib35faba4321c70fed007c923ff0f5e618fad0276
This change update uncompress load address for ART
uncompress action, previously it was load at sys address.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ifce14c3cfe7746203acfcffa91adb2861f2b03db
This features allow to execute task on core 1.
This features not enable in tiny u-boot
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I986e7e3af840fd627dc5b6675931b79ab24ecb33
This changes removes NAPA support from tiny U-boot config
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I057064d63a3ac0788275a4572242cc251a445a98
This patch is to enable USB FAT filesystem and
fatwrite commands so as to enable crashdump collection
in connected USB device.
Usage:
Set dump_to_usb to 1 as U-boot environment variable.
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
Change-Id: Ifc05b26a1952052fa521f2975ca7c27b1b4fc5a3
This change will define qspi_debug macro to print
debug messages.
Change-Id: I49c5278f63fa53dc5b2237aeb9bfef97990ecc86
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
This change will enable config for serial training.
This change also fix the the logic to get most appropriate phase
out of passed phase.
This change also add support to read serial training offset from
partition table. Also patching freqency value & phase value to kernel.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: Ibb4a5cd80f16605e8e91bdf6a0c6c484edff1735
This changes update the TLV offset as per the kernel tlv crash region.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I27d79d5f2d35c4b584292410ee76d26b123d301f
This code update add support in tiny spi-nor flash
for uncompressing the ART partition and read
the mac address.
This support GZIP and LZMA compression
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I699cebeb98748116ab7e3b1412d33562a4aa9d6d
This changes remove nand command and Env support
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I6c59f8259306ef79499420afe4da17a2674e98be
This code changes remove boot support for netbsd, vxworks and
rtems.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I1f435fc80f29ad1f8e52e4b18d832e120ac9a503
This code changes remove the list of features given below
which is not required for tiny u-boot.
1.CONFIG_EFI_PARTITION
2.CONFIG_RBTREE
3.CONFIG_CMD_CACHE
4.CONFIG_CMD_BOOTZ
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I8174686db1e30334512fb2c77e77aa9ae101e023
This changes enable ipq5018-tiny arch config which support
ipq5018 standard board files but support only particular dtbs
This change mainly removes eMMC, Pci ,I2C & UBI command and
additional features support
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I4c92c77094d7fbc23b979f0c65f650cc89c28715
This config enable Block device support and
DOS partition support , required for USB command.
Change-Id: I5734e468f7deded2ba2f44921e8f4ff5420c4801
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
This change will enable page_scope_read & multipage_read support for
QPIC.
QPIC version 2.0 onwards , QPIC support page_scope_read &
multipage_read command to enhance the read performance.
In normal page read command SW is needed to write EXEC_CMD register
for each Code word and collect any Status related to that CW before
issueing EXEC_CMD for next CW.
For page_scope read command SW is required to issue EXEC_CMD
only once for a page. Controller HW takes care of Codeword specific
details and automatically returns status associated with each CW to
BAM pipe, dedicated for status deposition.
enabling all bits in NAND_AUTO_STATUS_EN will require 4 data
descriptors of 24 bytes each. This will publish all NANDc status
registers in system memory.
For multipage_read command SW is required to issue EXEC_CMD only
once for all the pages which configured in QPIC_NAND_MULTI_PAGE_CMD
register.
All interrupts will be operational and valid in these modes.
To check the status for each codeword, it is not possible to access
the status registers while the read command is operational in
page_scope & multi_page read modes. Hence, another feature to publish the
status data (for all NAND status registers) by programming the
NAND_AUTO_STATUS_EN register.
For serial NAND:
Read command for page_scope_read = 0x78800032 (QPIC_NAND_FLASH_CMD)
Read command for multi_page_read = 0x78400032 (QPIC_NAND_FLASH_CMD)
For Parallel NAND:
Read command for page_scope_read = 0x00800032 (QPIC_NAND_FLASH_CMD)
Read command for multi_page_read = 0x00400032 (QPIC_NAND_FLASH_CMD)
Now we fixed maximum data bytes read in one go 128KiB(2KiB page),
256KiB (4KiB page), 512 KiB (8kiB page), because from upper layer
we are getting more than 128KiB data bytes request in one go. if so
just changing the value of "MAX_MULTI_PAGE" macro will increase the
maximum data bytes in one go.
Change-Id: I48eea51ff8f5f79f3490d8a538c295ecc3eeee19
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
