Ensure -fPIC is passed during the linking stage to fix LTO build
failures (relocation errors) on MIPS and other architectures.
Fixes: #20436
Signed-off-by: Anari Jalakas <anari.jalakas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21455
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
They are being default enabled unconditionally when they should
depend on 802.11k. 802.11k should not be enabled by default
either as it can cause issues with certain older drivers and
is useless without a userspace program like usteer or DAWN.
If users want to enable 802.11k they will enable it when they
set such programs up.
Another inconsistency with rnr was dealt with so that it is not
default enabled. This is also not done with old wifi-scripts
and is generally unexpected and surprising behavior.
Moreoever, this introduces an inconsistency between old shell
wifi-scripts and ucode version. Old wifi-scripts does not do this.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/21425
Signed-off-by: Robert Marko <robimarko@gmail.com>
Commit ab805ec316 ("generic: add missing squashfs config") enabled
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU in the generic config, so it is no
longer needed in the target configs.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Link: https://github.com/openwrt/openwrt/pull/21465
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch RTL838X SerDes setup to use the internal SerDes hardware modes
instead of the PHY_INTERFACE_MODE_* modes.
Use the generic mapper in the beginning of the SerDes setup and convert
all affected functions to the different mode type. This will be moved
out to the generic pcs_config later.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21480
Signed-off-by: Robert Marko <robimarko@gmail.com>
We finally reached the point where PCS has full control over SerDes and
no parts of this are scattered in other drivers anymore. To make that
clear, drop the comment in pcs_config that explains this former state
and remove a warning which states that pcs_config isn't fully
implemented yet.
Add a generic output to at least keep a generic sign of life from the
PCS driver, independently from what the variant-specific code currently
prints.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21481
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add a comment stating the situation around a specific RTL838x firmware
file. After SerDes setup has been moved to the PCS driver, this firmware
file is partially unused. If the remaining bits are pulled out or just
replaced, this firmware file can be dropped. The comment ensures that we
do not forget about that.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21481
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove some unused defines for SerDes in the ethernet driver. They have
been missed before but are completely out of place here now.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21481
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, kmod-crypto-kpp is only implied for curve25519 and thus it
can get unselected and then building will fail due to missing kpp.ko.
Same issue happens with kmod-crypto-hash for poly1305.
So, lets drop the whole implies logic and make sure to always select
them as dependencies.
Fixes: #21386
Link: https://github.com/openwrt/openwrt/pull/21483
Signed-off-by: Robert Marko <robimarko@gmail.com>
The GS1920-24HPv1 is a switch with 24 copper ports and 4 combo SFP/copper
ports and PoE on the first 24 ports.
Specifications:
---------------
* SoC: Realtek RTL8292M
* Flash: 16 MiB SPI flash
* RAM: 128 MiB
* Ethernet: 24x 10/100/1000 Mbps
* Buttons: 1x "Reset" button
* UART: 1x serial header, standard DCE pinout (Tx = 2, Rx = 3, Gnd = 5);
9600 baud, 8n1, +- 5.6V logic levels
* SFP: 4 combo copper/SFP ports
* PoE: 24x
* Fans: ADT7468 fan controller
Works:
------
- (24) RJ-45 ethernet ports
- Switch functions
- Buttons
- LEDs (partial support, the wrong LEDs light up)
- Manual fan control
Not yet enabled:
----------------
- PoE (requires patches to realtek-poe to support i2c)
- Combo ports (link is up, but no data is transferred)
Fans:
-----
After boot, the fans are running in full speed mode. You can interact
with the fan controller at /sys/class/hwmon/
Installation:
-------------
This device uses ZyNOS instead of Linux, this makes installation a bit
more cumbersome. Serial console is required!
1. Set the switch to boot from the first image. This step is crucial,
it will fail to boot if this is not set properly.
2. Connect to the switch using serial and interrupt the boot process
to enter debug/recovery mode.
3. Load the OpenWrt initramfs image via XMODEM. You need to obtain an
unlock code, based on your MAC address, first. See the excellent write
up at https://www.ixo.de/info/zyxel_uclinux/ for details. Replace
unlock_code in the commands below by the code obtained.
After running ATBA5, the terminal needs to be closed and re-opened
with 115200 baud. This speeds up the file transfer significantly!
The file length in bytes need to be given instead of file_length below.
You also need an XMODEM upload utility like "lrzsz-sx -X" to transfer
the file. Start the XMODEM upload after running the ATUPxxxx command:
> ATEN1,unlock_code
> ATBA5
> ATUP80100000,file_length
> ATGO80100000
4. Wait for OpenWrt to boot. Once this is done, transfer the loader binary
and the sysupgrade image to "/tmp" using scp.
5. Install OpenWrt permanently by running the following two commands on
the switch (over SSH):
> mtd write /tmp/loader.bin loader
> mtd write /tmp/sysupgrade.bin firmware
6. Reboot the switch and enjoy OpenWrt.
NB: You do not need to touch the loader binary unless it's recommended.
The loader is not part of a regular sysupgrade file and will be left
untouched. The boot loader only checks if the loader is valid to be
able to boot.
Recovery/ Return to stock:
--------------------------
Just spam the "u" key during (or "z" for 9600 baud) during memory testing
to trigger a recovery XMODEM upload at 115200 baud. A standard OEM upgrade
image works properly.
Signed-off-by: Andreas Böhler <dev@aboehler.at>
Link: https://github.com/openwrt/openwrt/pull/20439
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This adds the build recipes for rt-loader-standalone and zynsig to the
Makefile. The recipes are required for the upcoming ZyXEL GS1920 series.
Signed-off-by: Andreas Böhler <dev@aboehler.at>
Link: https://github.com/openwrt/openwrt/pull/20439
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hardware specifications:
- CPU: Freescale/NXP P2020, dual-core PowerPC @ 1 GHz
- RAM: 1 GB DDR3
- Flash: 2 MB NOR, 512 MB NAND
- Networking: 7x Gigabit Ethernet ports (via two Marvell 88E6171
switches, each attached to a different MAC)
- USB: 2x USB 2.0 ports (front panel)
- mini-PCIe slot
- RTC: Ricoh RS5C372A
- 4 buttons (via external MCU)
- 3 LEDs (via external MCU)
- LCD display (via external MCU)
Installation procedure:
1. Obtain the original MAC address table from the stock bootlog, for
example:
setting device eth0 to 00:90:7f:00:00:01
setting device eth1 to 00:90:7f:00:00:02
setting device eth2 to 00:90:7f:00:00:03
setting device eth3 to 00:90:7f:00:00:04
setting device eth4 to 00:90:7f:00:00:05
setting device eth5 to 00:90:7f:00:00:06
setting device eth6 to 00:90:7f:00:00:07
2. Open the case and move jumper JP1 from 2-3 to 1-2 to enter FAILSAFE
mode.
3. Power on the device and interrupt the boot process to access the U-Boot
shell.
4. Program the MAC base address into the EEPROM (text after '#' is a
comment):
mac ports 3
mac 2 00:90:7f:00:00:01 # first MAC address from bootlog
mac save
5. Reset the device and enter the U-Boot console again.
6. Connect a TFTP server to port 6 and boot the initramfs image:
setenv ipaddr 192.168.1.3
setenv serverip 192.168.1.2
setenv loadaddr 1000000
tftpboot $loadaddr openwrt-mpc85xx-p2020-watchguard_xtm330-initramfs-kernel.bin
bootm $loadaddr
7. (Optional) Backup all MTD partitions if you want the ability to restore
stock firmware.
8. Perform a normal sysupgrade from the initramfs environment.
9. Power off the device and move jumper JP1 back to 2-3.
10. The device will now boot OpenWrt.
Known issues:
- LCD, buttons and LEDs are controlled by an external MCU; the protocol is
currently unknown.
- The internal connection between the two Marvell switches is unused by
OpenWrt.
- The stock firmware uses an empty U-Boot environment; saving variables
modifies the environment and prevents a normal boot. FAILSAFE U-Boot
remains functional.
- WatchGuard configuration is encrypted; DSA MAC addresses are stored in
this configuration.
- Failsafe Ethernet works on port1.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21020
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit drop ftp.nara.wide.ad.jp and
www.ring.gr.jp from projectsmirrors.
These mirrors only supports plain HTTP.
Drop mirrors that does no meet modern
security standards.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/21268
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
When DHCP Option 60 is specified via sendopts (hex, decimal, or named
formats), udhcpc sends its default "udhcp <version>" string alongside
the custom value, which causes authentication failures with some ISPs.
This fix detects Option 60 in sendopts and automatically passes -V ""
to udhcpc to suppress the default version string while allowing
multiple user-defined vendor classes.
Supported formats:
- Hexadecimal: 0x3c
- Decimal: 60
- Named: vendor
Fixes: #21242
Signed-off-by: JINLIANG GU <ihipop@gmail.com>
https://github.com/openwrt/openwrt/pull/21450
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This reverts the feeds.conf.default to git.openwrt.org
Fixes: 66e6ebbc1e (microchipsw: drop source-only)
Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21475
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for the Edgecore ECS4100-12PH, an 8-port 802.3bt PoE Gigabit
Ethernet switch with 2 combo RJ45/SFP and 2 SFP ports.
Hardware:
* SoC: RTL8393M
* RAM: 256MiB
* Flash: 32MiB SPI-NOR
* Ethernet:
* 8x GbE RJ45 PoE (external RTL8218B)
* 2x GbE RJ45 / SFP combo (external RTL8214FC)
* 2x SFP (external RTL8214FC)
* Console: RJ45 RS232 port on front panel
* PoE: Nuvoton M0516 + 2x Broadcom BCM59121 PSE
Installation via bootloader:
* open serial console (baud rate 115200)
* interrupt boot process by pressing any key during boot
* boot the OpenWrt initramfs:
# rtk network on
# tftpboot 0x8f000000 /tftpboot/openwrt-realtek-rtl839x-edgecore_ecs4100-12ph-initramfs-kernel.bin
# bootm
* copy openwrt-realtek-rtl839x-edgecore_ecs4100-12ph-squashfs-sysupgrade.bin
to /tmp and use sysupgrade to install it:
# sysupgrade /tmp/openwrt-realtek-rtl839x-edgecore_ecs4100-12ph-squashfs-sysupgrade.bin
Even though U-Boot claims the switch is based on the RTL8392M SoC, my
device is based on the RTL8393M SoC. I have confirmed this by removing
the heatsink, and the Linux kernel agrees with this. Therefore the DTS
has the rtl8393_ prefix.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Avoid family checks where possible. Now that the init_mac()
functions are in perfect shape include them into the
configuration structure. While we are here rename them
to the new driver prefix.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21391
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This function does nothing at the moment. Simply add it for
completeness.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21391
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Move the functions close to each other and sort them.
No functional changes here.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21391
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This function is now only called on RTL838x devices. Remove all
obsolete family checks.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21391
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The ethernet driver must initialize the chip for proper operation.
Currently there exist functions for RTL838x, RTL839x and RTL931x.
All of them are called differently. Combine them in a central call
location.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21391
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Replace remove_new callback in struct platform_driver with remove. This
was just meant for a transition period. remove_new is dropped with 6.13.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21430
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Now that there is a consumer board available, lets drop source-only so that
buildbots provide official images.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Novarq Tactical 1000 is a LAN9696 based switch.
Specifications:
* CPU: Microchip LAN9696 switch SoC
* DRAM: 2GB DDR4
* Storage:
* 32MB QSPI NOR
* 16GB eMMC
* Networking:
* 24 x 10/100/1000 RJ45 via LAN8804 Quad PHY-s over QSGMII
* 4 x 100/1000/2500/5000/10000 SFP+ ports
* 1 x 10/100/1000 management RJ45 via LAN8840 PHY over RGMII (U-Boot too)
* USB: 1 x USB2.0 Type-A
* Management via USB-C (MCP2200):
* UART @ 115200 baud (Default), 921600 possible
* GPIO-s for bootstrap and reset
* LED-s:
* 2 per networking port (Green and Yellow)
* Green status LED
* Soft reset GPIO
* Power: 12V DC barrel jack
* External PoE:
* Option for PoE add-on
* Temperature Sensors:
* TMP1075 onboard
* CPU temperature
* Microchip MCP79402 RTC with battery back-up
* Microchip ATECC608C secure peripheral
* CPU heatsink with PWM fan
* Onboard header for case fan
Installation instructions:
1. Connect to UART via the USB-C port
2. Connect the management port
3. Boot and interrupt U-Boot
4. TFTP the OpenWrt initramfs image and boot it
5. SCP the OpenWrt eMMC GPT image to a running OpenWrt initramfs to /tmp
openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img.gz
And decompress it via:
gzip -d /tmp/openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img.gz
6. Wipe eMMC with:
dd if=/dev/zero of=/dev/mmcblk0 bs=1M
7. Flash OpenWrt eMMC image with:
dd if=/tmp/openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img
of=/dev/mmcblk0
After a restart OpenWrt will boot, and then regular sysupgrade can be used
for upgrades.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Update microchipsw TF-A to the latest bugfix release that fixes
SHA checksum validation if large files are uploaded via the monitor mode.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
The SerDes access functionality in the mdio-realtek-otto drivers was
meant to be temporary, at least from a certain point on. The user was
all the SerDes configuration that lived in the PHY and DSA drivers.
Now that SerDes configuration has moved completely to the PCS driver,
there is no user of this code anymore. Instead, the PCS driver uses a
separate driver 'mdio-realtek-otto-serdes' to access the SerDes. Thus,
drop all that unused functionality from the "normal" mdio driver.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21439
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This package adds initial u-boot support for qoriq target.
U-boot for qoriq devices must be compiled with 32-bit compiler and
linked with 32-bit linker. It's part of mpc 85xx target. But qoriq
target is 64-bit. As workaround, mpc85xx binary toolchain is downloaded
only for this u-boot.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/10941
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Replace downstream hack disabling SGMII in-band AN on the MediaTek platform
with pending upstream patch announcing in-band AN capabilities and implementing
configuring in-band AN in the PHY driver.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Running with CONFIG_HZ_PERIODIC=y keeps the scheduler tick running
continuously, which produces higher jitter and lower power efficiency.
In contrast, CONFIG_NO_HZ_IDLE=y (the upstream default) stops the tick
only when the CPU is idle, giving lower idle power and normal runtime
jitter.
An Intel N150-based router/firewall was tested using two kernel builds:
one with CONFIG_HZ_PERIODIC=y, and one with CONFIG_NO_HZ_IDLE=y. Power
consumption was measured while the system was essentially idle (no
meaningful traffic). The CONFIG_NO_HZ_IDLE=y build consistently used
less power.
Details: The two power-measurement methods were:
1. PkgWatt from turbostat (software)
2. Wall-power measurement using a Kill-A-Watt (hardware)
The test began by zeroing the Kill-A-Watt and simultaneously running:
turbostat --quiet --Summary --interval 10 --show Busy%,PkgWatt
The test duration was defined by the time required for the Kill-A-Watt
to accumulate 0.005 kWh, after which the average wattage was calculated.
Results:
+----------------------+-----------------+----------------+-----------+
| Metric | HZ_PERIODIC | NO_HZ_IDLE | Delta % |
+----------------------+-----------------+----------------+-----------+
| PkgWatt | 3.59 ± 0.38 | 3.38 ± 0.34 | -5.9 % |
+----------------------+-----------------+----------------+-----------+
| Avg wattage at wall | 12.47 | 12.00 | -3.77 % |
+----------------------+-----------------+----------------+-----------+
The mean PkgWatt difference is 210 mW (5.9%) in favor of
CONFIG_NO_HZ_IDLE=y, with a t-statistic of ~3.17 and p ≈ 0.002.
Wall-power measurements show a 470 mW (3.77%) reduction under
CONFIG_NO_HZ_IDLE=y.
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21470
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reading the fibre status of a RTL8214FC needs access to the
page register (31) and the extended page register (30).
The current implementation has two issues.
- The extended page register is not restored after changes
- Instead of register 30 its write-only sibling 29 is used.
This has the following side effect:
During regular polling kernel calls rtl8214fc_read_status
and determines the media status via __rtl8214fc_media_is_fibre.
Writing to register 29 a copy of that value is handed over
to register 30. This makes use of mdio tools for the first
port of the RTL8214FC hard. Register 30 is overwritten with
zero every second.
Change access from register 29 to register 30 and adapt
the sequence to restore register 30 contents at the end.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21393
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The patch that adds MT7987 support to the mtk-2p5ge
driver does the following:
case MTK_2P5GPHY_ID_MT7987:
phy_clear_bits_mmd MTK_PHY_LED_ON_POLARITY
case MTK_2P5GPHY_ID_MT7988:
phy_set_bits_mmd.. MTK_PHY_LED_ON_POLARITY
phy_set_bits_mmd... MTK_PHY_LED_ON_POLARITY | xxx
This clearly resulted in the LED polarity of the 2.5G PHY
on the MT7987 being reversed. Remove redundant MMD operations
to fix the 2.5G PHY LED error on Bananapi BPi-R4 Lite.
Fixes: d62fc50f ("mediatek: import patches from SDK to support MT7987 Ethernet")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Create a common dtsi for Bananapi BPi-R4 Lite and add missing
gpio-leds. This reduced code and fixed the following LED bug:
LED 'green:status' not found (err=-19)
Fixes: 3a71dd58 ("uboot-mediatek: add support for the BananaPi BPi-R4 Lite")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Drop several leftovers of SerDes configuration from PHY and DSA drivers.
Both drivers can be seen as free from any SoC-side SerDes stuff.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21360
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Add the SerDes setup hooks in the PCS driver for RTL839x so that
pcs_config actually triggers configuration. Adjust the DTS of all
devices accordingly by adding pcs-handles and dropping phy-handles.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21360
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Add a patch sequence needed to properly initialize 10G SerDes. This is
taken from the SDK mostly as-is ([1]).
Exit early from SerDes reset for now because it seems to cause some
issues on lower 5G SerDes.
[1] 30e7d6c8c2/sources/rtk-dms1250/src/dal/cypress/dal_cypress_construct.c (L215)
Co-authored-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21360
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Add basic SerDes setup functionality which determines and sets the
hardware mode of a SerDes, and does a SerDes reset. This is restricted
to the 10G SerDes only as the 5G SerDes are setup properly by default.
Further initialization will be needed for the modes to function properly
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21360
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Refactor the previously added SerDes reset sequence. Use the SerDes
MDIO interface instead of plain writes into the switchcore's register
space. Moreover, simplify the sequence because the SDK version is
unnecessarily complex.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21360
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Add SerDes reset sequence mostly as-is from the SDK (except for
adjusting the register write calls to work with regmap).
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21360
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Interrupts for DWC3 node were completely mixed up - SPI interrupt 62 is
not listed in reference manual at all. It was also causing dtbs_check
warnings:
ipq5018-rdp432-c2.dtb: usb@8af8800 (qcom,ipq5018-dwc3): interrupt-names:0: 'pwr_event' was expected
ipq5018-rdp432-c2.dtb: usb@8af8800 (qcom,ipq5018-dwc3): interrupt-names: ['hs_phy_irq'] is too short
Warning itself was introduced by commit 53c6d854be4e ("dt-bindings: usb:
dwc3: Clean up hs_phy_irq in binding"), but this was trying to bring
sanity to the interrupts overall, although did a mistake for IPQ5018.
IPQ5018 does not have QUSB2 PHY and its interrupts should rather match
ones used in IPQ5332.
Correct it by using interrupts matching the bindings and reference
manual.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21454
Signed-off-by: Robert Marko <robimarko@gmail.com>
BDF for EAP623-Outdoor HD v1 was renamed in the repo, but ipq-wifi
was not updated to reflect that, so do it now to fix broken wifi.
Fixes: #21432
Signed-off-by: Robert Marko <robimarko@gmail.com>
