The `syn_flood` option name is deprecated, `synflood_protect` should
be used instead. firewall3 and firewall4 both support this option since
a long time. LuCI already replaces the option name.
0abcb39b62
Suggested-by: rparge in OpenWrt forum
Link: https://github.com/openwrt/openwrt/pull/21642
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
KERNEL_DCB was introduced in 40f1db9cb1, however the dcb utility is not
enabled for iproute2. Although DCB is not generally available among
Ethernet cards, not having the dcb utility renders it completely
unchangeable.
On aarch64, it takes ~85.3KiB.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21606
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The indicator is unused by default and not associated
with the wan port. So let’s fix this.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a cosmetic change. There is no need to use mac
address increment/decrement in the dts on these devices,
so this can be simplified.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
In the original DTS from the device firmware, there are
no entries that enable SPI calibration. Therefore, it
should be disabled.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Keenetic devices always use the WAN port MAC address as
the MAC address printed on the label.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Any ftpd package such as vsftpd or atftpd (are there others?) should
create their own unprivileged user. Both of the aforementioned
packages do not even use this ftp user and run as root. That should be
addressed in separate commits.
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/19418
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Gemini reference design-derived devices uses a partition
format which is predictable and we can exploit this to offer
some proper upgrade path.
The kernel for these contains a hack to use this partition
format unaltered by combining the partitions "Kern" and "Ramdisk"
to one image with all of the kernel+ramdisk in memory.
Then the "Application" which is used for the rootfs go into its
own partition.
Standard flash layout:
Kern 2048k |
Ramdisk 6144k | = 9216k
Application 6144k | = 15360k
Following the pattern of the factory image we create three
images named zImage, rd.gz and hddapp.tgz (these filenames
are misleading! They are just required by the old firmware.)
and flash each individually with "mtd" during upgrades.
Since the IB-4220-V has a different layout with a bigger kernel
space we parameterize this so we can handle this too. (More
fixes are needed for that device though.)
A way to upgrade older OpenWrt on these platforms to the latest
and greatest will be to copy the file
target/linux/gemini/base-files/lib/upgrade/platform.sh
to /lib/upgrade/platform.sh
on your running system and then run sysupgrade from the image
produced after this patch.
The script is picky to sanity check the partitions before
commencing upgrade.
This was tested with a full sysupgrade on the iTian SQ201.
Link: https://github.com/openwrt/openwrt/pull/21680
Signed-off-by: Linus Walleij <linusw@kernel.org>
A phy is configured in two stages
- phy_probe() for setup of structures
- config_init() for device setup (after reset)
RTL8214FC is a combo phy and the currently active port can be switched
with the SFP helper functions that are triggered during SFP insertion
and removal. In case a fibre SFP is inserted while booting the SFP
trigger is run between the above mentioned stages. During the final
setup in config_init() the phy is reset to the copper port. Thus no
link is available on fibre and the SFP must be reinserted for normal
operation.
For a consistent behaviour the fibre/copper port setup must run before
the SFP probing and not afterwards. Move the setup code from config_init()
into phy_probe().
Fixes: 10ae743 ("realtek: phy: simplify RTL8214FC configuration")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21582
Signed-off-by: Robert Marko <robimarko@gmail.com>
There are some shortcomings in rtl8214fc_media_set()
- It always uses the mdio raw page (4095) of RTL838x for writes.
That is wrong when the phy is attached to an RTL839x (raw = 8191)
- It uses the internal write only extended page companion (29)
- The extended page content is not preserved
Fix the three issues.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21582
Signed-off-by: Robert Marko <robimarko@gmail.com>
Changing the fibre/copper power of a RTL8214FC changes the
extended page via register 29. This is the write only companion
of register 30. The register is afterwards overwritten to 0.
Use the proper extended page register 30 and preserve its content
during the operation.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21582
Signed-off-by: Robert Marko <robimarko@gmail.com>
Bit 11 of registers 16, 19, 20, 21 in page 0x266 denotes if a port
of a RTL8214FC is set/favoured to fibre (0) or copper (1). For unknown
reasons the bit was mixed with BMCR_PDOWN. Convert this to a meaningful
define.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21582
Signed-off-by: Robert Marko <robimarko@gmail.com>
There is a misunderstanding about BIT(7) aka EX_PHY_MAN_24_27 in
SMI_GLB_CTRL register. The SDK sets/clears it at different places and
it is not clear what it is for. Observation shows that it is essential
for a working MAC_LINK_MEDIA_STS register.
A RTL838x device has usally two configurations
- port 24/26 are 2 serdes driven fiber ports
- port 24-27 are 4 PHY driven combo ports
In the combo case the above bit must be set so that a switch between
copper and fiber can be detected. Cleanup the MDIO initialization
and remove the unneeded bit handling in the DSA driver.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21653
Signed-off-by: Robert Marko <robimarko@gmail.com>
DESCRIPTION field has been deprecated since 2007, yet internal exporting
causes intermittent package build failures due to the deprecation check,
even with packages that don't have that fields set. Replace all
DESCRIPTION exports with alternative variables defined through shexport
and shvar helpers and remove the check.
Fixes: 547b127d ("make kernel module packaging code reusable and use it in madwifi")
Fixes: 7558f028 ("DESCRIPTION:= is obselete, so complain if it is used and use TITLE if no description is set")
Fixes: cc435322 ("build: optimize target metadata dump")
Fixes: d081edf7 ("build: clean up and optimize ipkg control generator code")
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21668
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix parsing ABI when package has multiple tags and apk returns them in a
single line.
Fixes: 31cdd13d ("imagebuilder: add ABI suffix to packages when using apk")
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21660
Signed-off-by: Robert Marko <robimarko@gmail.com>
The vr9.dtsi configures the GPIO 38 as reset GPIO. Also the fon LED is
configured on GPIO 38. This conflicts and makes the probing of the PCIe
controller fail in OpenWrt 25.12.
The AVM GPL source code configured GPIO 21 as PCIe reset.
Fixes: https://github.com/openwrt/openwrt/issues/21562
Link: https://github.com/openwrt/openwrt/pull/21641
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Remove upstreamed patches:
100-08-cmd-mtd-add-markbad-subcommand-for-NMBM-testing.patch [1]
101-01-mtd-spinand-add-support-for-FORESEE-F35SQA002G.patch [2]
101-02-mtd-spinand-add-support-for-FORESEE-F35SQA001G.patch [3]
110-mtd-spi-nand-add-support-for-FudanMicro-FM25S01A.patch [4]
Some SPI-NAND driver macro definitions and function parameters have
been changed in the latest release[3]. Hence we also had to rework
the related local patches to follow the upstream changes.
Tested on MT7981 SPI-NOR/EMMC.
[1] 21c1098cf4
[2] 2a0f8e7da0
[3] 2cbdd3e449
[4] 8b984b5a39
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
[daniel@makrotopia.org: tested MT7622 SNAND and SPI-NOR]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Standalone image builder doesn't have a repositories file as all
packages are included, which causes:
ERROR: failed to read repositories: PATH_TO_BUILDER/repositories: No such file or directory
The images are still built, so this is more of an informational error.
Pass related argument to apk only when CONFIG_IB_STANDALONE is not set.
Fixes: a8d17c21 ("imagebuilder: actually support IB from buildbot")
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21658
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update the DTS to the latest pending upstream version, it looks like this
should get merged soon upstream.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
This enables the kernel configuration option
to build the SUN50I_A100 driver, which is
the one driver used by the D1 for the RGB
LED controller.
Signed-off-by: Gabriel Roper <lockheedmaniac@gmail.com>
This adds the device tree patches written by Samuel Holland
to the kernel. The driver was merged into mainline Linux in 6.8,
but the device tree patches were never merged into mainline.
Signed-off-by: Gabriel Roper <lockheedmaniac@gmail.com>
Add the loop module and mkfs tool to use f2fs/ext4
based overlays. This fixes the following bug:
mount_root: unable to create loop device
mount_root: no usable overlay filesystem found, using tmpfs overlay
Fixes: 99545b4bb1 ("d1: add new target")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
The USB of most d1 devices works in otg or peripheral mode.
Enable this feature to use usbgadget and fix musb errors:
musb-sunxi 4100000.usb: Invalid or missing 'dr_mode' property
musb-sunxi 4100000.usb: probe with driver musb-sunxi failed with error -22
Fixes: 99545b4bb1 ("d1: add new target")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Update to version 2024.01 to remove upstream patches.
The remaining patches come from this repository:
https://github.com/smaeul/u-boot/tree/d1-wip
[for Dongshan Nezha STU, Nezha D1]
Tested-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
To update kexec and kdump dependencies for supporting the aarch64 architecture.
Signed-off-by: Roc Lai <laipeng668@qq.com>
Link: https://github.com/openwrt/openwrt/pull/21623
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add devm for ioremap to proper cleanup.
Test gpiod_direction_input for failure.
Remove rb91x_nand_release and fix wrong usage.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21165
Signed-off-by: Robert Marko <robimarko@gmail.com>
The RTL8218D currently relies on proper U-Boot configuration. In
case that is not possible, provide a basic setup sequence that can
bring the PHY "alive". The SDK provides multiple configuration
sequences for two operation modes (XSGMII or QSGMII) and the different
SoC families. Due to limited testing resources only provide a setup
for RTL93xx devices and both modes at the moment.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21551
Signed-off-by: Robert Marko <robimarko@gmail.com>
bump dnsmasq to latest 2.92
updated 200-ubus_dns.patch
no changes to 100-remove-old-runtime-kernel-support.patch
all remaining patches not required
Changelog for version 2.92 https://thekelleys.org.uk/dnsmasq/CHANGELOG
Signed-off-by: gongzi miao <miaogongzi0227@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21598
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Extract survey fetching into get_survey() and store results in iface.survey,
allowing access to full survey info (not just noise) for later use.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Moved interface discovery and data population into an exported update()
function that can be called on-demand to refresh wireless interface
information. This allows using iwinfo.uc as a library inside daemons.
Signed-off-by: John Crispin <john@phrozen.org>
When a package variant changes from =y to =m, its .install stamp file
was not being cleaned up, causing both variants to appear in the
package install list.
Fix by making compile depend on prepare-package-install, ensuring
the stamp file is always cleared. Only =y packages recreate it.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Packages using PROVIDES to declare virtual package alternatives (like
tc-tiny, tc-bpf, tc-full all providing 'tc') could be simultaneously
selected as =y, causing installation conflicts. The PROVIDES mechanism
only handles dependency resolution, not mutual exclusion.
Add add_implicit_provides_conflicts() to automatically generate CONFLICTS
from default variants to non-default variants sharing the same PROVIDES.
This ensures only one variant can be built-in (=y) at a time.
Skip generating implicit conflicts when the non-default already has
explicit CONFLICTS with the default, to avoid Kconfig dependency cycles
with the select-based dependency resolution.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This default pinctrl doesn't work at all. We must add pinctrl phandle
to the ethernet-phy node or mac node. This patch removed the internal
phy LED pinctrl group definitions from the SOC dtsi because it is
currently only used by one device. Some incorrect LED pinctrls also
have been removed because these devices do not have hardware phy LED.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21108
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The PCIe NIC WED offload features depend on it. Also add the missing
"syscon" compatible for the wed_pcie node as it's accessed by
syscon_regmap_lookup_by_phandle().
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21108
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
These stuffs were copied from the vendor SDK. There are currently
no drivers compatible with them. The pending upstream patches did
not include them either.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21108
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is in preparation for the next update to EcoNet Ethernet driver
which will be using real resets rather than bit-bashing. Patches are
backported up to the current state of clk-next because I intend on
upstreaming these patches soon.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://github.com/openwrt/openwrt/pull/21545
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
On some SoCs like RK3399, U-Boot no longer export the serial
address in $stdout variable, it has been changed to something like
`stdout=serial,vidconsole` since video supported was added. So
detect $soc variable instead, this also makes the script more clear.
Addtional note: rk3566 is reported as rk3568, rk3582 is reported as
rk3588 in $soc.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/21610
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The dts for RTL93xx devices has duplicate data about the
smi bus of a phy node. The parent node declares the number
of the bus and the realtek,smi-address attribute does the
same.
Remove the bus part from the realtek,smi-address attribute
and lookup the bus from the parent node. While we are here
remove all realtek,smi-address attributes where phy id
matches the bus address. The driver will use that as a
fallback.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21438
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Switch the mdio bus topology for devices that have their phys
attached to bus 1-3. This does not have any impact because
the mdio driver was completly redisgned
With this commit the bus id is stored twice. Once in the (new)
bus and in the (old) realtek,smi-address property. E.g.
&mdio_bus1 {
reg = <1>; <<< bus id
phy24: ethernet-phy@24 {
reg = <26>;
compatible = "ethernet-phy-ieee802.3-c22";
realtek,smi-address = <1 2>; <<< bus & address id
};
};
This redundancy will be removed later.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21438
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
RTL93xx devices have 4 smi busses (0-3). Add them to the dts.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21438
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
