mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-03-14 06:49:43 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 6

d1: Add device tree configuration for D1 RGB LED Controller

Browse source 
This adds the device tree patches written by Samuel Holland
to the kernel. The driver was merged into mainline Linux in 6.8,
but the device tree patches were never merged into mainline.

Signed-off-by: Gabriel Roper <lockheedmaniac@gmail.com>
This commit is contained in:
Gabriel Roper 2025-10-06 21:21:40 -07:00 • committed by Zoltan HERPAI
parent 8dccd1e44f
commit 12992dcb7e
2 changed files with 130 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

60
target/linux/d1/patches-6.12/0015-riscv-dts-allwinner-d1-add-led-controller-node.patch Normal file
View file

@ -0,0 +1,60 @@
From: Samuel Holland <samuel@sholland.org>
Subject: riscv: dts: allwinner: d1: Add LED controller node
Date: Sun, 29 Oct 2023 16:26:58 -0500
Allwinner D1 contains an LED controller. Add its devicetree node, as
well as the pinmux used by the reference board design.
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v5)
Changes in v5:
- New patch for v5
arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 6 ++++++
arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 15 +++++++++++++++
2 files changed, 21 insertions(+)
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
@@ -59,6 +59,12 @@
};
/omit-if-no-ref/
+ ledc_pc0_pin: ledc-pc0-pin {
+ pins = "PC0";
+ function = "ledc";
+ };
+
+ /omit-if-no-ref/
uart0_pb8_pins: uart0-pb8-pins {
pins = "PB8", "PB9";
function = "uart0";
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -156,6 +156,21 @@
#reset-cells = <1>;
};
+ ledc: led-controller@2008000 {
+ compatible = "allwinner,sun20i-d1-ledc",
+ "allwinner,sun50i-a100-ledc";
+ reg = <0x2008000 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(20) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_LEDC>;
+ dmas = <&dma 42>;
+ dma-names = "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
gpadc: adc@2009000 {
compatible = "allwinner,sun20i-d1-gpadc";
reg = <0x2009000 0x400>;

70
target/linux/d1/patches-6.12/0016-riscv-dts-allwinner-d1-add-rgb-leds-to-boards.patch Normal file
View file

@ -0,0 +1,70 @@
From: Samuel Holland <samuel@sholland.org>
Subject: riscv: dts: allwinner: d1: Add RGB LEDs to boards
Date: Sun, 29 Oct 2023 16:26:59 -0500
Some D1-based boards feature an onboard RGB LED. Enable them.
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v5)
Changes in v5:
- New patch for v5
.../boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts | 12 ++++++++++++
arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts | 13 +++++++++++++
2 files changed, 25 insertions(+)
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
@@ -59,6 +59,18 @@
status = "okay";
};
+&ledc {
+ pinctrl-0 = <&ledc_pc0_pin>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ multi-led@0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+ };
+};
+
&mmc1 {
bus-width = <4>;
mmc-pwrseq = <&wifi_pwrseq>;
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
@@ -22,6 +22,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/dts-v1/;
@@ -121,6 +122,18 @@
};
};
+&ledc {
+ pinctrl-0 = <&ledc_pc0_pin>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ multi-led@0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+ };
+};
+
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";