The board goes into hung state when the GD_SIZE more than
GENERATED_GLOBAL_DATA_SIZE. In this case, the stack poninter
address will be pointing to the unknown address which leads to
hung state. Fixed the hung state to point to correct address.
Change-Id: I0efc807ca07c16ae0b79ea6c606fde931f02a220
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Adding a common file fdt.c and moving fdt fixup related routines
to this file to keep them generic.
Change-Id: I863135fc79f52eb35789605b8e240c637db0e02a
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
This change adds uart, spi, nand, emmc gpios
to dts files. Also, config info like machid,
ddr size, supported flash configs are added to
dts files.
Change-Id: Id130b721fb09777d58401334d7f59c6377b84496
Signed-off-by: Akila N <akilan@codeaurora.org>
This change eliminates the use of gboard_param
variable. Subsequent changes will make use of
dts.
Change-Id: Ic79a72c4fa1b86e864b55306a32c110bcfbc9184
Signed-off-by: Akila N <akilan@codeaurora.org>
1. Moved gpio structure declaration to gpio.h
2. Moved gpio configuration bit value macros to dt-bindings
Change-Id: I9da1cc3703a92e02cfa86765c8d4afe5321fed35
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Moved the clock header files into include folder to
escape from relative paths.
Change-Id: I776141741296e1138e45efb069479a0e26b4855c
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Added device tree based IPQ common GPIO driver.
Updated device tree with uart_gpio data.
Change-Id: I4752609a766716d3bdd97f6ca1c1c20ffa3caa47
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Added ipq806x timer information to common timer driver.
Updated qcom timer comon driver for ipq806x support.
Change-Id: I1a28ef362bc4161af38d1065b3c4b848ef4ad0d1
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Modified common serial driver to work for all AK, DK and HK boards.
Made the driver more generic. The board specific
configurations are moved to respective board.c files.
Change-Id: I8aa0001d215126eb1dd15d75d6ab3f9139d6f919
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Moving cmd_bootqca.c from architecture specific common directory to
board specific common directory.
Change-Id: I453abeb554572bf2363a959e7dbe32efcf7dbac6
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Added dts and initial board support for ipq806x.
Change-Id: I33992413905a0399ea3d6dfbd606c8e7ec30b6bf
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Set mtdids environment variable based on the boot flash so that right
set of mtdids is patched to kernel device tree.
Change-Id: If2f063e51a6bb73f3e8197fb133e0399b0b4df18
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Moved to DM approach to make it more flexible to support
AK/DK/HK chipset.
Change-Id: I0fded02c97b7ace500df44bbf39285ef6fb58321
Signed-off-by: Saravanan Jaganathan <sjaganat@codeaurora.org>
Fixed warnings for both ipq807x and ipq40xx
builds.
Change-Id: I69accebf525ee52f470335a14474378f5e7f65b0
Signed-off-by: Saravanan Jaganathan <sjaganat@codeaurora.org>
check the image header, if the magic signature matches then
perform and indirect jump to 64 bit EL1 through TZ.
Change-Id: I92888faa7ed908652671bf09a4f6d4599340db5b
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
SMC calls are common for IPQ807x, IPQ40xx hence moving it to
common folder
Change-Id: I3d6564ad51ebe396f85cedbf41374374f40865c6
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
dtbs are made as .o
a table specifying their machid and address is added
the dtbs and header are added to u-boot image in a seperate section
dtb will be chosen based on machid detected from SMEM
Change-Id: I50ac5b56da3a431c1a75cb9fc113fafaedbc09b8
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
The SMEM is used for all the platforms like ipq40xx and ipq807x.
So moving this into a common place to use all qcom platforms.
Change-Id: I04f0bf0e7aad0eae71024d734d8049a3470d510d
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
