Updated the source from gpll0_out_aux to gpll0_out_main
Change-Id: Iecaefbe03c02286823d1a67ea53b180bfd8d948e
Signed-off-by: anusha <anusharao@codeaurora.org>
Only i2c aliases will be populated as needed in respective
RDP DTS. All i2c nodes will be added in common SOC DTS.
Change-Id: I540425c63339f45990231dca84cab6e66af009fb
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Only 2 PCIE's must be enabled by default in AL02.
Change-Id: I6ef06daca92e83df065bb4ca80d77e79b13834e5
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This change allign pci id with design.
This changes remove the manual id variable and use
alias id number instead.
Change-Id: I7ba481ee6e05b58a8481ccd89c6d40c4b3928e76
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
In ipq9574, switch_mac_mode0 is used for Uniphy0 and
this patch updates the same for db-al02 RDP.
Change-Id: I23080d70f9462bf857e083d6f54a97e8ce20d341
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
In c3 config, we will be making the following changes:
DB-AL01-c3:
Removing 1x2.5G port & adding 1x10G in USXGMII1 with rework
DB-AL02-c3:
Removing 1x2.5G port & adding 1xSFP+ in USXGMII0 with Rework
Note that other features are same as c1 in c3 config and
Ethernet port changes will be done on top of this.
Change-Id: I4ccfcf196e923a815deea377879cdc3e782d4673
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
These properties are not used in UBoot and this patch
removes the same.
Change-Id: I949f207d5b772755e6ab818270cd6c401e8e8f8a
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Updated mock_utmi_clk to 24 MHz and use appropriate clock period.
Change-Id: I080d1d7e544b97d1911dfdc597f44fcb37a7d906
Signed-off-by: Praveenkumar I <ipkumar@codeaurora.org>
DB-AL02 variants by default has support for 4x1G, 1x2.5G and
1x10G ethernet ports.
Change-Id: Ic3821acce4f743582292dc9655da8d238c3f6709
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
The main features of DB-AL02-C1 are as below:
Flash: SPI NOR, QSPI NAND
RAM: DDR4
PCIe: M.2 SSD
Ethernet: 1x10G, 1x2.5G, 5x1G
USB: 1xUSB3
PMIC: I2C based MPS
Only change in DB-AL02-C2 is that it can support:
Flash: eMMC with rework
Other features are same as DB-AL02-C1
Change-Id: Ia52dffb1ecd832d89bbe183bd8d32bf2d0351d90
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the following:
1) Removes unnecessary TIMER and THRESHOLD configurations in EDMA
2) Adds Uniphy Clock deinit and init in eth_init (during each ping
& speed change)
3) Removes preheader configurations and calculations from EDMA
as there are no preheaders in ipq9574 platform (Instead there is
a secondary descriptor)
4) Add sufficient delay after uniphy reset
5) Remove CONFIG_IPQ9574_RUMI macro from network drivers
6) Change default mac_speed to 0
7) Fix the ppe sched. and tdm configuration
8) Reduce the block size to 1280 + headers for tftp (around 1326)
for timebeing without which timeouts were observed randomly during
TFTP (Note that the MTU is 1514 bytes)
Change-Id: I4004adfb2ae0dc98d65e458c15dafcff6523744b
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
By default DB-AL01 supports 4 Malibu, 1 AQ and 1 Napa.
This patch updates the nodes accordingly to support this
default configuration.
Change-Id: I4fbf97ed65e1f38d0bb50a5e82746bf2d807fa66
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This change also remove emulation dts since
build issue due to i2c duplicate
Change-Id: I28e0ffa1dd275c6ba416ded91756589ffe886631
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
This patch updates the following:
1) Removes unused/duplicate macro: NSS_CC_PORT1_RX_CBCR_ADDR
2) Remove CMN_BLK_INIT
3) Update MAX Ports to 6
4) Rename switch_mac_mode to switch_mac_mode0 in DTS and driver
5) Fix SYSNOC frequency configuration
6) Tx/Rx descs is initialized to 0 before use which is
needed because Alder DDR is not init to 0 by default.
Change-Id: Ide22e146f9c8ecb75585d0a8d04e426c463ad8c9
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the QCA PHY names and its references
accordingly.
Change-Id: I5d301fcecc49793387a50487bf2e713a5a9288e8
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch adds a boolean in DT, so that configurations
can be done accordingly in network driver in case the
RDP supports 2 AQ Ports.
Change-Id: I6eb070ad0d281e3bac0b111f0659e67168296456
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
The ethernet node is already included from the file
ipq9574-db-al01-c1.dts. Remove redundant ethernet node
config from this c2 file.
Change-Id: I1046f04c67c1a67c614708cd6575dd436154ad83
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This changes add pci 2 lane support in pci driver
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia4235c277e91d68366f6ae8aa16d8505a2ca5b05
