This change will fix the following compiler warnings for AK and DK targets.
1.Wimplicit-function-declaration
2.Wdiscarded-qualifiers
3.Wstrict-prototypes
4.Wmaybe-uninitialized
5.Wunused-variable
6.Wint-conversion
Change-Id: I364904283172ccb19602ae1b6deceb8c61ea7638
Signed-off-by: sameeruddin shaik <samesh@codeaurora.org>
This patch modifies the SPI devices and SPI
info idx to 2. This is necessary because ipq6018
platform has support for both SPI NOR and
SPI NAND
Change-Id: I0fcdd4a43cd95e4c21b738fda193672fc51bf75f
Signed-off-by: speriaka <speriaka@codeaurora.org>
Moved Aquantia, QCA8033, QCA8075 and QCA8081
PHY configs to defconfig.
For tiny u-boot variant, except QCA8075 all
other PHYs are disabled.
Change-Id: Iaafa848bf7d578bfa3bcdaf0cfcb815ecfef067f
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Moved PCI, USB and I2C configs to defconfig and
disabled for tiny variant to reduce image size.
Change-Id: I8dfdd75057527779e7af246bea796a22d50575fc
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
making one config for relocation disabling in u-boot,
rather than specifying target name and checking for every target
Change-Id: I99895d0f0b1c750bbb796beb3a8f3e6cd5d1a20b
Signed-off-by: sameeruddin shaik <samesh@codeaurora.org>
Adjust the tftp loading address, so that it wont
try to load the files to the u-boot region in ram.
Change-Id: I8b56ce8930c534b275c157c06033ba385ccb8a04
Signed-off-by: sameeruddin shaik <samesh@codeaurora.org>
Some spi nand flash uses single byte read id(9FH) command,
for those devices the sequence is
byte1 byte2 byte3 byte4
9FH MID DID DID
some other spi nand flashes uses two byte read id(9F 00H) command
for those devices the sequence is
byte1 byte2 byte3 byte4
9FH A7-A0 MID DID
The first byte is the actual command and the second byte is a dummy byte.
For devices which uses new sequence, we need to pass
appropriate read id command with dummy byte.
Change-Id: Idf2e8740f8341596cd8f58d22d5e33a4b4972a31
Signed-off-by: Antony Arun T <antothom@codeaurora.org>
This change will resolve the "L2 Master port decode error"
print in the Kernel log.
Change-Id: I12fd39a85093cc1d7fab336898e039a61eeb5565
Signed-off-by: sameeruddin shaik <samesh@codeaurora.org>
This change is a workaround for Micron eMMC card. As per the card
extended CSD register value, the minimum size of a write protect
region is 0x8000 blocks (16MB). So the user should give start address
and size to align with 0x8000. But this eMMC part actually does
protect 32MB of memory.
We changing the minimum write protect region size from 0x8000 to
0x10000 for Micron eMMC card.
Change-Id: Id53c337374dfba8adb6bd550826337d8ecfe17f3
Signed-off-by: Vinoth Gnanasekaran <vgnana@codeaurora.org>
