Moved the clock header files into include folder to
escape from relative paths.
Change-Id: I776141741296e1138e45efb069479a0e26b4855c
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Added device tree based IPQ common GPIO driver.
Updated device tree with uart_gpio data.
Change-Id: I4752609a766716d3bdd97f6ca1c1c20ffa3caa47
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Added ipq806x timer information to common timer driver.
Updated qcom timer comon driver for ipq806x support.
Change-Id: I1a28ef362bc4161af38d1065b3c4b848ef4ad0d1
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Modified common serial driver to work for all AK, DK and HK boards.
Made the driver more generic. The board specific
configurations are moved to respective board.c files.
Change-Id: I8aa0001d215126eb1dd15d75d6ab3f9139d6f919
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Moving cmd_bootqca.c from architecture specific common directory to
board specific common directory.
Change-Id: I453abeb554572bf2363a959e7dbe32efcf7dbac6
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Added dts and initial board support for ipq806x.
Change-Id: I33992413905a0399ea3d6dfbd606c8e7ec30b6bf
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Set mtdids environment variable based on the boot flash so that right
set of mtdids is patched to kernel device tree.
Change-Id: If2f063e51a6bb73f3e8197fb133e0399b0b4df18
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Moved to DM approach to make it more flexible to support
AK/DK/HK chipset.
Change-Id: I0fded02c97b7ace500df44bbf39285ef6fb58321
Signed-off-by: Saravanan Jaganathan <sjaganat@codeaurora.org>
Fixed warnings for both ipq807x and ipq40xx
builds.
Change-Id: I69accebf525ee52f470335a14474378f5e7f65b0
Signed-off-by: Saravanan Jaganathan <sjaganat@codeaurora.org>
check the image header, if the magic signature matches then
perform and indirect jump to 64 bit EL1 through TZ.
Change-Id: I92888faa7ed908652671bf09a4f6d4599340db5b
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
SMC calls are common for IPQ807x, IPQ40xx hence moving it to
common folder
Change-Id: I3d6564ad51ebe396f85cedbf41374374f40865c6
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
dtbs are made as .o
a table specifying their machid and address is added
the dtbs and header are added to u-boot image in a seperate section
dtb will be chosen based on machid detected from SMEM
Change-Id: I50ac5b56da3a431c1a75cb9fc113fafaedbc09b8
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
The SMEM is used for all the platforms like ipq40xx and ipq807x.
So moving this into a common place to use all qcom platforms.
Change-Id: I04f0bf0e7aad0eae71024d734d8049a3470d510d
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
u-boot and dtb are seperate images. This patch combines them as
single ELF image.
Change-Id: Ib3c72c26844ffd4fd8489d0595c243a15434802e
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
serial clock rate is now fixed.
GCNT timer needs to be initialized.
Change-Id: Ia66ff458a4c66cfb6cf9fa5fd4953498ef3b656d
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
This patch has the initial changes required to make the
qca_mmc driver buildable. Also added the Kconfig
options required for the qca_mmc driver.
Change-Id: I15c0e9288ae5c7ae361659dff1e84b619de989a8
Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
GCNT is already enabled by SBL, hence this could be avoided
in u-boot.
Change-Id: I207f0085f015ea7c5e80d8d20c0af95e498a9565
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
