Same as AP.AL02-C4 RDP, with support for 10G PHY or 10G fiber in UNIPHY0
Change-Id: Ic3935a2cdc0033ed4c7478ae14abd3cf61aef797
Signed-off-by: Hariharan K <quic_harihk@quicinc.com>
devsoc-01.6 and devsoc-01.7 RDPs are same as devsoc-01.4 and devsoc-01.1
respectively with 10GE SFP module instead of 2.5GE SFP module.
Change-Id: Ic65bab9126a34cb73dd51d5ce6a85e1cf29a1215
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
This RDP is based on AL02-C4.
The extra feature is QCN90xx on PCIE0
Change-Id: Ic153279dbe18daf9f602bf44f0bf7539f43ba5f8
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
AL02-C10 is based on AL02-C8.
C8 enables QCA8084 PHY mode, C10 is for Switch mode
Change-Id: Idbd154c66437357b5c2dbd636031af564c121cdf
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This changes add support for uboot base files.
Change-Id: I5f4b937dec30a27ec6acce6ceada7fbed5d5a41d
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
AL02-C8 is based on AL02-C4. Instead of QCA8075, QCA8084 is used
for Ethernet.
Change-Id: I70e3560461c1a547c40f5b9b839cc94ef2a39520
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
AP.AL02-C7 is similar to AP.AL02-C4 with emmc boot
Features: WK 2G + WK5G + WK 6G
AP.AL02-C8 is similar to AP.AL02-C6 with emmc boot
Features: Internal 2G +WK 5G + WK 6G
Change-Id: I31d1f65b071dfddc4eee393d292add58d3ddeadc
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
The main differece on AL02-C4 are,
PCIE1: 2G WKK
PCIE2: 6G WKK
PCIE3: 5G WKK
Other features are same as AL02-C1.
Change-Id: Ie13154dacf247c99e15f1da775238012075740ee
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
The main differece on AL02-C3 are,
PCIE0: 1x5G
PCIE2: 1x6G
PCIE3: SDX
Other features are same as AL02-C2
Change-Id: If40e554baf16af1654bef3314f017f93d2babfbb
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
In c3 config, we will be making the following changes:
DB-AL01-c3:
Removing 1x2.5G port & adding 1x10G in USXGMII1 with rework
DB-AL02-c3:
Removing 1x2.5G port & adding 1xSFP+ in USXGMII0 with Rework
Note that other features are same as c1 in c3 config and
Ethernet port changes will be done on top of this.
Change-Id: I4ccfcf196e923a815deea377879cdc3e782d4673
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
The main features of DB-AL02-C1 are as below:
Flash: SPI NOR, QSPI NAND
RAM: DDR4
PCIe: M.2 SSD
Ethernet: 1x10G, 1x2.5G, 5x1G
USB: 1xUSB3
PMIC: I2C based MPS
Only change in DB-AL02-C2 is that it can support:
Flash: eMMC with rework
Other features are same as DB-AL02-C1
Change-Id: Ia52dffb1ecd832d89bbe183bd8d32bf2d0351d90
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This change also remove emulation dts since
build issue due to i2c duplicate
Change-Id: I28e0ffa1dd275c6ba416ded91756589ffe886631
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
The main features of DB-AL01-C1 are as below:
Flash: SPI NOR(32 MB), QSPI NAND(256 MB)
RAM: DDR3(1 GB)
PCIe: 1x2G, 1x5G, 1x6G, SSD
Ethernet: 1x10G, 1x2.5G, 5x1G
USB: 1xUSB3
PMIC: I2C based MPS
Only change in DB-AL01-C2 is that it can support:
Flash: eMMC(8 GB) with rework
Other features are same as DB-AL01-C1
Change-Id: Id988f0aa1d3ee9ec203c1682f3dda5f698aca63d
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
The main features of AL02-C1 are as below:
Flash: SPI NOR(32 MB), QSPI NAND(256 MB)
RAM: DDR4(2 GB)
PCIe: 1x5G, 1x6G
Ethernet: 2x10G, 4x1G
USB: 1xUSB3
PMIC: I2C based MPS
Only change in AL02-C2 is that it can support:
Flash: eMMC(8 GB) with rework
Other features are same as AL01-C1
Change-Id: I1c92c57aab854e7835439fd67fc5c2029256de2e
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Added config, dts and initial board support code for ipq9048.
Signed-off-by: anusha <anusharao@codeaurora.org>
Change-Id: Ib4d0da9aedd5c98b02c59dd83d9efa78baada335
This RDP is the combination of MP03.1 + NAPA.
This RDP support Nor & nand flash.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia39cdf8ae21ad9800ee1c00c7af44c9bc1af03dc
This changes add Machid , USB Power gpio and enable build support.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I99e2da23f54da4d5e4edc9312f08340b88f7c59a
This changes add mp03.1(Ap & Db) support in tiny u-boot
for 16MB profile
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: If27bcb8f760c2e648b70811576fc62c4a44f249b
Removed identical device-tree to reuse original dts.
Affected boards: AC02 and OAK03
OAK03 to reuse HK01 dts and AC02 to reuse AC01 dts
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Change-Id: I5a70514370f394b15e68d5819cf8d1b52da14f3f
We had identical device-tree for different RDPs
though they are the same except for machid.
This change enables reuse of a single device-tree
across RDPs with same configurations.
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Change-Id: If81b431e4a6afe54e427fe0a52de275fdd29df00
This changes remove emulation dts and add mp02.1 dts support in
Makefile for tiny-nor build
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I99d28415442b4079d4e67e586b794b88aba403a2
This change duplicate the mp03.1 dts with minimal node.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I90a7eac51f022af0d66865cbe6b4df6bc57972a7
This new dts file contain uart support for sod bring up purpose
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I994e041363702febc40ed3c7632f76468483f8ca
This changes enable ipq5018-tiny arch config which support
ipq5018 standard board files but support only particular dtbs
This change mainly removes eMMC, Pci ,I2C & UBI command and
additional features support
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I4c92c77094d7fbc23b979f0c65f650cc89c28715
This change is to add device-tree files and Makefile changes
to support the following board variants
- MP02.1
- MP03.1
- MP03.3
The device tree files are copies of emulation-dts
along with RDP specific changes
. Disabled eMMC support for MP02.1
. Timer frequency to be used from soc-dtsi
. Removed 'emulation' flag from xhci
Change-Id: I0d5e776c98770e61fa2ab6009fd78ff5cc8127c3
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
Emulation DTS is no more required. So just keep it for reference, don't build
it. This helps to free up some space.
Change-Id: I93a462fd720acbe27792fa995317bbb44ca82f9b
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
