In AP-MI01.3 RDP, PCIe0 and PCIe1 are enabled in single
lane configuration
Change-Id: I5592d50ebb425a92ad536142573d09cdd60206b2
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch updates the PCIe1 lane configuration for DB-MI01.1
and DB-MI02.1
Change-Id: I3dc15a3255d74fcbd5147b2fa6f89c184e48410b
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch updates the AP-MI04.1 PCIe configuration from
PCIe0 and PCIe1 to PCIe1 and PCIe2
Change-Id: If4aa155cc1005becd050fbc36d91d3764005c4c4
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch adds the support for AP-MI01.6-QCN9160 RDP by reusing
the ipq5332-mi01.6.dts for better readabilty
Change-Id: I2776222fd80637f0111dc9074491f351cfb932b3
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch adds the ethernet support for AP-MI01.3 and
removes pci nodes from dts
Change-Id: I3fcb338a061d732b44409aa835a1fde45508be95
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch adds a condition to power cycle the
SDX based on the current status of the e911 call.
Change-Id: Id3cf50cfb49a26151c98b7d52e18b9c487cfb935
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
This patch removes the pcie2 and usb 3.0 support in AP-MI01.2-QCN9160
Change-Id: I1c2a6c9d27f1d2c75d3be505076626396d4c9d37
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This change set SGMII mode and force mode based on
dts entries.
Change-Id: Ideaa1bb77fe8fb37a7e6b907a987f6dcac54917f
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This changes enable both PHY and switch configure
simultaneously and also switch can be configure
to any port.
And also these changes enable dual MDIO bus support.
Change-Id: Ib86c8a15abb9a7a35aa86d87cef78ad917dd1a00
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
AL02-C17 is based on AL02-C4. This variant
enables PCie0 and PCie2.
Change-Id: I67aa500bd13ec661a43b17c4cbcd56c9a6db8abc
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This patch adds support to power cycle the SDX device during
the IPQ crash scenario by toggling the full_power_on and reset
gpios.
Change-Id: Ifac2db5480c13456ef50b6d779691c5bf41f21b2
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Add skip_pci_mask environment variable to skip pci enumeration
based on the bitmask. Also, removing the pci3 dts entry from
the RDP437 & RDP461 to skip pci3 enumeration.
Example - setenv skip_pci_mask 0xc
The above command will skip pci enumeration of bus 2 & 3.
Change-Id: Iff50acca07ffc026bed84a0d2372e6de0a3ba3a9
Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
After mibib reload kernel and rootfs info have to be reloaded using
get_kernel_fs_part_details function otherwise partitions
will be marked as bad offset
Change-Id: I9a0ec847b65ff10ec7b54b65929efd034a25d278
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
With this change, Add option to support
prefixing crash dump files with timestamp prefix
Change-Id: I30343e6d7dc58376264dd34a4a3cd25bb34e65c6
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This change will read calibration data from the 0:ART partition and
apply it to the appropriate registers.
Change-Id: Ic9360c0fce229c1d1867ee897b811abc56d2b1c7
Signed-off-by: Gurumoorthy Santhakumar <quic_gsanthak@quicinc.com>
IPQ5332-DB-MI03.1
Flash: NOR and NAND / emmc (option)
Features:
1 Lane PCIe Gen3 [pci0]
2 Lane PCIe Gen3 [pci1]
1 USB 2.0
Change-Id: Iff6bd9cb0faa1d5c78c3468b80bc7b0dfe984e79
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
> For Miami, passed both address and size as args in scm call.
Change-Id: Ie5d4ff5e6770eddcd566d99cc24efc322b0f2e37
Signed-off-by: quic_abilj <quic_abilj@quicinc.com>
When xbl logs are disabled no logs came in uart console
due to gcc_blsp1_ahb_clk in disabled state.
This patch enables gcc_blsp1_ahb_clk in u-boot to avoid this issue.
Change-Id: I161b003096544e54d3d230027c2665e8fa3d0f5e
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This change creates Al02-c9 dts file to help with pci enumeration
Change-Id: I9a743de8ebbdc3f4ee43c14204ab1244e8945a12
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This patch enables i2c usb and pci in AP-MI01.1 and AP-DB-MI02.1
it enables usb and pci in AP-DB-MI01.1
Change-Id: I0f32fb9c2f44088034bd908c947cfe77ceb524b3
Signed-off-by: Gurumoorthy Santhakumar <quic_gsanthak@quicinc.com>
This patch enables i2c usb and pci in AP-MI01.2 and AP-MI01.4.
Change-Id: I4f09485fcbad4247aa75676cb72dc4345405fdfc
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
