This patch updates the QCA PHY names and its references
accordingly.
Change-Id: I5d301fcecc49793387a50487bf2e713a5a9288e8
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch adds a boolean in DT, so that configurations
can be done accordingly in network driver in case the
RDP supports 2 AQ Ports.
Change-Id: I6eb070ad0d281e3bac0b111f0659e67168296456
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
The ethernet node is already included from the file
ipq9574-db-al01-c1.dts. Remove redundant ethernet node
config from this c2 file.
Change-Id: I1046f04c67c1a67c614708cd6575dd436154ad83
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the following:
1) Update speed clock, port mac clock reset for ipq9574
platform.
2) Handle PPE init for all 3 switch mac modes.
3) Handle port mux config when port5 is part of Uniphy0
during when Uniphy1 won't be used.
Change-Id: I23b04b00036ab139cd5877bcf913dbecb7fb7fa2
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the following:
1) Add support for 3 switch_mac_modes in ipq9574 platform.
2) Update xpcs and soft_reset as needed for ipq9574 platform.
3) Support usecase where 5*1G ports can be supported as part
of Uniphy0 during when Uniphy1 won't be used.
Change-Id: I949db117fa3c8adb937c5c055eedcaa6ead0da07
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the following:
1) Handle 2 aquantia ports during ping
2) Remove SFP Port Support Temporarily
3) Update clocks for different port speeds and different
ethernet port types as needed.
4) Update number of ports to 7 since 7 is the MAX ports
supported in ipq9574 platform.
Change-Id: I2d9040227b9c8a11cddc0d00e835ac64d3a4940d
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This change skip USB init if EUD is enable.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I26b4177b1b4fdf08ab3fbff81a71eb09c3b8b4a3
This patch sets the function select as mdc_mdio and also
adds AQUANTIA, QCA80xx PHY ASSERT and DE-ASSERT support.
Change-Id: Ib606b51342df4e80d705271cc661f6fbe1664ed0
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org
The main features of DB-AL01-C1 are as below:
Flash: SPI NOR(32 MB), QSPI NAND(256 MB)
RAM: DDR3(1 GB)
PCIe: 1x2G, 1x5G, 1x6G, SSD
Ethernet: 1x10G, 1x2.5G, 5x1G
USB: 1xUSB3
PMIC: I2C based MPS
Only change in DB-AL01-C2 is that it can support:
Flash: eMMC(8 GB) with rework
Other features are same as DB-AL01-C1
Change-Id: Id988f0aa1d3ee9ec203c1682f3dda5f698aca63d
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
The main features of AL02-C1 are as below:
Flash: SPI NOR(32 MB), QSPI NAND(256 MB)
RAM: DDR4(2 GB)
PCIe: 1x5G, 1x6G
Ethernet: 2x10G, 4x1G
USB: 1xUSB3
PMIC: I2C based MPS
Only change in AL02-C2 is that it can support:
Flash: eMMC(8 GB) with rework
Other features are same as AL01-C1
Change-Id: I1c92c57aab854e7835439fd67fc5c2029256de2e
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Updated the data FIFO size to work with 4K page as well.
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: I5d94e50755b0934d1dd6c9c0d2c6759a782f52d5
This change will add support for 4K Macronix spi nand
"MX35UF4GE4AD-Z4I"
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: I94e07d9e25de46c67fcb679ef149990e093afc8f
This patch moves the entire Uniphy configurations to
!CONFIG_IPQ9574_RUMI as there is no PHY/UNIPHY in EMU
Platform.
Change-Id: I404916d10caed87e4825172345195bf92df1b725
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
During boot flow, when u-boot enters into u-boot,
eth init must be done. This patch adds support for
the same.
Change-Id: I00c39308e2f9afde59abae5b8a71fa281a7b3b51
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
In EMU Platform, there is no PHY/Uniphy, clocks/resets and
by default all MACs will be configured as SGMII mode.
The first 4 ports will have GMAC and PC side link speed
should be set as 10M, RUMI side link speed should
be configured as 1000M and then last 2 ports will have
XGMAC and PC side link speed should be set as 100M and the
RUMI side link speed should be configured as 10G.
Change-Id: I2ffe2bdb9c58eeacb3f765094c2bfb89e81a5c7d
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the VSI settings. The VSI Table size has
now changes from 3 word to 4 word and the same has been
accomodated. Without writing 4 words to that Table, the VSI
writes won't be processed by the H/W.
This patch updates the scheduling, TDM configuration
and the ppe port mux configuration as required for ipq95xx.
This patch also moves the configurations not required
for EMU Platform to !CONFIG_IPQ9574_RUMI.
Change-Id: Id54e40d26e80c36e7a61642d8494c30bbd3ea2a5
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the address of the EDMA registers, removes
registers which are not used and then does the required changes
to accomodate the new EDMA Descriptor format.
This patch also does the required changes to accomodate Secondary
Descriptor which is added instead of preheaders in ipq95xx.
We have also updated the number of descriptors per ring to 128
with this patch and have also moved the configs not required for
EMU Platform to !CONFIG_IPQ9574_RUMI.
Change-Id: I6e98c457d76c66f87b74cc0eafa7088d0081f533
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
