This change is to update the section name for wififw
in single-image with the QCN IDs when multiple wififw
images get packed.
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
Change-Id: I56ab611a127b9958c38737684d856c51fabf7cd2
This patch updates the MDC and MDIO gpio strength from 2MA
to 8MA.
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Change-Id: Ie510d7ecaca1d22c97e4c8522050a76ba9b1b22c
This change will change serial training data read to one complete
page instead of 64-bytes read. Partial page read will cause some
data curroption issue if read request failed so read one complete page.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: Ibad101f096440e5dc10dfb4b3329a0aa6bddee7d
It will resolve usb probe failure in hs phy
without ss phy. It enables utmi clock instead
of pipe clock in hs phy only configuration.
Change-Id: Idaf140d2cbe068304f1ce87c443c8e2196e3433e
Signed-off-by: Manikanta Mylavarapu <mmanikan@codeaurora.org>
This change will fix proper clock source macro in set_clk_rate function.
Currently we are passing the wrong value to qpic_set_clk_rate for clock
source.
wrong:
qpic_set_clk_rate(IO_MACRO_CLK_200_MHZ, QPIC_IO_MACRO_CLK, NAND_QSPI_MSTR_CONFIG);
The last argument should be clock source not register base address.
correct:
qpic_set_clk_rate(IO_MACRO_CLK_200_MHZ, QPIC_IO_MACRO_CLK, GPLL0_CLK_SRC);
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: Ie9e07c253220924fd0c9287f7f0e2c5d42351128
After reading data from mmc, dest pointer will point to
the end address. To calculate the start of dest pointer
number of bytes copied has to be subtracted.
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: I24610a3b3bb498c4ee4ebba58e557d109c6af1ef
When bootm is called from uboot command prompt mtdids env is not set.
Set the mtdids env variable to proper value so that kernel can populate
the mtd partitions.
Change-Id: Ibaa7d196fb2fd3163fa14b9128becdad3b6c13f2
Signed-off-by: Prasanna Kumar Thoorvas Samyrao Muralidharan <ptsm@codeaurora.org>
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
MP03.4-C1 and MP03.4-C2 RDPs are based on MP03.3 and
MP03.3-C2 respectively.
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
Change-Id: I016eb422f3628e1a7733d71754613b2fa51245f1
rootfs_data partition is not required with the
latest fs tools OpenWRT package as the logical volume
inside the rootfs partition will be used for overlay
and it is removed from the parttion table. So making it
as optional
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: Ia5489b714833548fd7f1aa4491c61eb70efdfdfa
This change will fix memory leak problem in serial training.
For serial tarining we are allocating memory to hold the training
pattern buf. For any failure we are freeing the buffer but due to
wrong lavel used memory was not getting freed due to this memory leak
problem is happening.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I35ffd27df9b24ea53aed9e9f0623d8890ba66f06
This RDP is the combination of MP03.1 + NAPA.
This RDP support Nor & nand flash.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia39cdf8ae21ad9800ee1c00c7af44c9bc1af03dc
This changes add Machid , USB Power gpio and enable build support.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I99e2da23f54da4d5e4edc9312f08340b88f7c59a
This change adds support to pack different wifi firmware
images as listed in XML into single-images and flash wififw
image based on machid mapped with 'wififw_type' attribute
in config XML.
The partition XML files are generic flash layouts to be used
for any SP, so it contains wififw names for default(internal),
QCN9000 and QCN9100 supported SPs.
- For QCN9100 support, specify "--qcn9100" argument for
LM256/LM512 profile builds.
- For 16M builds, the argument is not required as packing and
flashing is based on image availability in ipq/ directory.
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
Change-Id: I3e8dac6c0f916eeb0b4c7b5ffa04afcdab8821b9
This changes enable pull up to drive 5V to usb
in MP03 RDP
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I43c2098c75f23a38bab221773c1dcce7c754cf39
This changes reduce spi-nor drv_strength from 8mA to 2mA.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ib21e8229fff3ce81f5da29edfb978cbe1fdc833b
This change make the qca_8337 switch initialization generic based on
dts irrespective of gmac controller.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I292992307ead2cd7bbb0763ff483dc16c266d417
This change fix Access violation created by APPS
master by accessing QPIC_XPU issue due to accessing
QPIC_QSPI_MSTR_CONFIG & QPIC_NAND_FLASH_SPI_CFG registers
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ibb840db12359eea01823dd7732fcb1ac1e7b8967
This features not support in tiny nor profile,
since no CONFIG_GZIP lib support
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia6321e60f5451e60193804ef2dba22ea493b435c
Linux-5.4 images are compressed with LZMA. So enable the decompressor
support for the same.
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Change-Id: I537c238fbab182e78e307ecb95bd47c0c9f9e8f5
This change will fix erase address configuration for QSPI
nand devices whose density is beyond 128MiB.
To erase a block as per datasheet of serial nand device
page row address <5:0> and the Block row address <16:6>.
In code we are forming directly pages address starting
from <16:0> i.e 17-bit address. Currently we are configuring
address_0 and address_1 register as follws.
addr0 = (page << 16) and addr1 = 0x0;
This logic will work if device size upto 128MiB, but if device
size beyond 128MiB then this logic will fail becasue upper most bit
will go out of add0 register.
Fixing this by changing address configuration logic for erase block.
addr0 = (page << 16) addr1 = (page >> 16) & 0xffff;
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I4950bb611780257629491ffbb42c91fcfedebc58
