Removed identical device-tree to reuse original dts.
Affected boards: AC02 and OAK03
OAK03 to reuse HK01 dts and AC02 to reuse AC01 dts
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Change-Id: I5a70514370f394b15e68d5819cf8d1b52da14f3f
This change will fix NULL pointer dereference while reading
from spi nand flash in oobbuf.
The multipage read features is only to read with ecc for
raw read/write the the access is page wise due to mtd layer
will request only one page at a time. So don't increment oobbuf
for every page while reading if already bitflips are present in spi
nand flash. if so data abort will happen due to NULL pointer
dereference.
error:
NAND read: device 0 offset 0x4480000, size 0x1000
data abort
pc : [<4a9515ec>] lr : [<44000e18>]
reloc pc : [<4a9515ec>] lr : [<44000e18>]
sp : 4a77f6f4 ip : bbfff3dc fp : 4a783510
r10: 4a97bb40 r9 : 4a77feb0 r8 : 44000e0c
r7 : 4a97ca2c r6 : 0000000f r5 : 00000004 r4 : 00000003
r3 : ffffffff r2 : 000001f4 r1 : 000000ff r0 : 44000e0c
Flags: nzCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I435f65183b56ceef64bad7d0df7ffebe02175a66
This change include setting Gpio 20 & 21 to default 0xC1
value in order to make gpio 28 & 29 works as uart in mp02.1 rdp
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I5fd482669c8429f930677f6eb9f1fdc191c7b2a6
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
This patch will tune ssuniphy to fixed
offset instead of SSC.
Signed-off-by: Manikanta Mylavarapu <mmanikan@codeaurora.org>
Change-Id: Ieca1e079275092ea49fcc1ffa9ba1dadadd2a93a
This patch will update usb3 configurtaion
based on ssphy availability.
Since usb3 ssphy shared with pcie phy,
certain configuration need to be done based
on ssphy availability.
Signed-off-by: Manikanta Mylavarapu <mmanikan@codeaurora.org>
Change-Id: I474a6ea269e7778738ca9464dae510bb58e8bcea
This changes fixup the mtdparts without support of
MTD framework,This code read the partition details from env
variable and patch to kernel dts.
Change-Id: I829808620c35b57973dc0ae015131bc5019c4844
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
This changes enable nor enviornemnt support if its no flash with
eMMC and NAND is disabled.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I1ff389ed388fb7f72543cc87e852c360a965db48
This changes update the TLV offset as per the kernel tlv crash region.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I27d79d5f2d35c4b584292410ee76d26b123d301f
This changes support config based single itb to load kernel
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I163d1788e2875fa8f4dcacb3c1c241535c8658b9
We had identical device-tree for different RDPs
though they are the same except for machid.
This change enables reuse of a single device-tree
across RDPs with same configurations.
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Change-Id: If81b431e4a6afe54e427fe0a52de275fdd29df00
This change fixes setting dirty bit in CMD_RCGR and configure GMAC
to run on GPLL4 clock source.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I01bb0e3af2da93f0464d41a6bd571480b1a4e581
Update usb controller and phy
configuration for enumeration.
Signed-off-by: Manikanta Mylavarapu <mmanikan@codeaurora.org>
Change-Id: I9e20fe5bf4c7abe7547f383ab58bff9b8dad64e0
This change will modify PULL value for eMMC CMD line.
with this change the pull value will be GPIO_PULL_UP.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: Id884ef4742dca5f2f30c699aa2ab48c0d3c7cc97
This change will fix serial training logic and enable
config to enable default qpic_io_macro clock @ 80MHz with
default phase delay valu 4 for all qspi serial line.
This change also fix the delay issue while writing to qpic
register via bam.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I345f736fdae9d48b6da0115ca7a8519b43fe9efd
This Gephy is internal phy driver for ethernet
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia4e744c0fbd990bdc94fe93263ac2ddbe4cecf61
This changes remove emulation dts and add mp02.1 dts support in
Makefile for tiny-nor build
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I99d28415442b4079d4e67e586b794b88aba403a2
Remove support for hk05 since it is
marked as obsolete in default setting table
Signed-off-by: Karthick Shanmugham <kartshan@codeaurora.org>
Change-Id: I972af09f912c1f613b462cf2559d8a645a0bb270
