The probe order for PCIe buses and devices is non-deterministic,
making the names eth2 and eth3 unpredictable (they may be swapped).
This patch fixes the names by referencing the device path using
`ucidef_set_network_device_path`.
This patch ensures that the OpenWrt interface name matches the case label.
Fixes: 8ca4caacd0 ("rockchip: Add support for RK3568 LinkEase EasePi R1")
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20779
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently the path for setting 20MHz doesn't set ht_capab to '' at the
beginning which results in null in ht_capab in hostapd.conf.
Fix this by setting config.ht_capab to '' for 20MHz htmode.
Fixes: #20762
Signed-off-by: Zhi-Jun You <hujy652@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/20768
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
cbc8ff0e6226 github: ci: add powerpc arch
8eba02233133 github: ci: add cmake build and source directories
5f3104ea17ae github: ci: disable json-c tests
27ff42cd40f9 scripts: devel-build: disable json-c tests
e0a9d02b52d1 dhcpv6: DHCPV6_OPT_INFO_REFRESH contains a 4 byte option
5a02da9c1200 dhcpv6: use compile time resolved sizeof(struct in6_addr) for IPv6 values
cf203ceb3fc8 dhcpv6: set a static define for DUID max length
3627e85d1540 dhcpv6: set static defines for DHCPv6 option header size
ecb9a0243e77 odhcp6c: RFC comments
c284c587d37d all: spell fixes
1259a32d7e4d dhcpv6: dhcpv6_handle_reply switch case handling
227280a37853 dhcpv6: dhcpv6_handle_advert; migrate if blocks to switch case
b253f8907e72 dhcpv6: migrate to switch case for dhcpv6_handle_reply
61a54db802cb dhcpv6: migrate to switch case for dhcpv6_handle_reply
49c64bbe00ba all: drop CER_ID
16ce83075b2e dhcpv6: refactor u8 and u16 to u32 to avoid boolean coercion
e5690c1f13...cbc8ff0e62
Options related to homenet (EXT_CER_ID) have been removed, so drop them from
the package.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20791
The MSTI range is 0..4095 but the HW range is only supporting a lower
range - for example 0..63 for RTL930x. But the HW doesn't really need to
know the actual MSTI. It is therefore possible to use a mapping from MSTI
to HW slot to allow a larger range of MSTIs.
Since the CIST (MSTI 0) is always needed, the mapping data structure is
skipping this entry and is always keeping the HW slot 0 for CIST.
This doesn't increase the total number of MSTIs a HW supports.
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20421
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The MSTP support (usually implemented by mstpd) requires from the kernel
that a VLAN can associated with an MSTI. At the moment, all these VLANs
just get the msti 0 harcoded on creation. But the
vlan_tables_read()+vlan_tables_write() helper already allow the
modification of the MSTI and only require a minimal hook to expose this
functionality.
It is also necessary to adjust the (M)STP states per MSTI and not only per
port (or for the CIST). The rtl83xx_port_stp_state_set() function was in
theory already capable to modify other MSTIs than CIST - if the msti would
not have been hardcoded to 0.
The userspace can trigger these modifications using netlink:
* (Re)associating VLANs with an MSTI:
bridge vlan global set dev <BR> vid <X> msti <Y>
* Setting the port state in a given MSTI:
bridge mst set dev <PORT> msti <Y> state <Z>
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Co-developed-by: Sven Eckelmann <se@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20421
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The VLANs and their MSTIs are shared on the realtek switch HW between
bridged and unbridged ports. But the MSTI state cannot be updated for an
unbridged port via DSA. To ensure that the port is still configured
correctly after leaving a bridge, the CIST state updates via DSA must also
be propagated to the MSTI states.
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20421
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
When joining a bridge or leaving a bridge, the CIST state will
automatically be adjusted by DSA using .port_stp_state_set(). But MSTIs are
completely unhandled.
If a port is joining a bridge, the default state must be disabled. The MSTP
daemon is then responsible for adjusting the state.
If the bridge is left, the forwarding state must be enforced because VLANs
(and with this also the MSTIs assigned to them) are shared between bridged
and non-bridged ports. An unbridged port must therefore not be left in an
blocked/disabled state for a VLAN (MSTI).
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20421
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If a VLAN doesn't have any members anymore, then it is removed and
implicitly returns back from any MSTI to CIST. The DSA layer will not
create any call to .vlan_msti_set and the driver is required to handle this
directly.
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20421
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Each SoC supports a different number of MST(I)s. The code must know this
limitation to correctly reject unsupported MSTIs or to allocate a large
enough mapping table.
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20421
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The DSA port code is trying to flush associated VLANs whenever the MST
state is changed. This functionality is available on a per port+vid based
using the L2_TBL_FLUSH_CTRL which is already used for the .port_fast_age
callbacks.
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Co-developed-by: Sven Eckelmann <se@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20421
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The realtek DSA switch driver sets up all VLANs using CIST. It is therefore
not necessary to enforce CIST using the ST_CTRL register.
This allows us later to overwrite the MSTI of VLANs. This is necessary to
get MSTP working on RTL93xx.
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20421
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Set a timeout of 5 seconds and 3 retries to reduce the time it takes for connection timeout.
Signed-off-by: Andy Chiang <AndyChiang_git@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19977
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This pull request is based on
- the discussions in https://forum.openwrt.org/t/adding-openwrt-support-for-linksys-mr6350
- https://github.com/openwrt/openwrt/pull/11405 which added support for similar devices.
Device Specs:
- IPQ4019
- Quad Core CPU
- 256 MB RAM
- 256 MB FLASH
- 4 LAN ports, 1 WAN port
- 2.4GHz (802.11n) and 5GHz (802.11c) wifi
- 3 LEDs (Red, blue, green) which are routed to one indicator at the top of the case
- 2 buttons (Reset, WPS)
Disassembling the device:
- There are 4 screws at the bottom of the device which must be removed
- Two are under the fron rubber feets
- Two are under the labels in the back (corner next to the rear rubber feets)
Serial interface:
- The serial interface is already populated on the device with a 6-pin header
- Pin 1 is next to the heatsink
- Pinout: 1: 3.3V, 2: TX, 3: RX, 4: unknown, 5: GND, 6: GND
- Settings: 115200, 8N1
Migrating to OpenWrt requires multiple steps:
- Load and boot the initramfs image
- Adapt U-Boot settings to support bigger kernels
- Flash the sysupgrade image
Load and boot initramfs:
- Connect serial interface
- Set up a TFTP server on IP 192.168.1.254
- Copy openwrt-ipq40xx-generic-linksys_mr6350-initramfs-zImage.itb to TFTP server
- Rename file to C0A80101.img
- Boot up the device and stop in U-Boot
- Run the following U-Boot commands after a link has been established:
tftp
bootm
- Initramfs image is started now.
Adapt U-Boot settings to support bigger kernels:
- Run "fw_printenv" in the initramfs image after booting
- There should be an entry kernsize=300000 which indicates the maximum size for the kernel is 3MB
- Execute "fw_setenv kernsize 500000" to increase the max kernel size to 5MB
- Check that the change are applied with "fw_printenv"
Flash the sysupgrade image:
- Default sysupgrade routine either with a initramfs image containing LuCI or via command line.
Revert back to OEM firmware:
- Only tested with FW_MR6350_1.1.3.210129_prod.img
- Flash the OEM firmware via sysupgrade
- Forced update is required
Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17977
Signed-off-by: Robert Marko <robimarko@gmail.com>
This device has only half the flash and ram of the RBR20. It also has
two lan ports instead of wan and lan.
Hardware
--------
SOC: Qualcomm IPQ4019
FLASH: 128MB (Winbond W29N01HVSINF)
RAM: 256MB (Winbond W632GU6MB-12)
WIFI: Qualcomm IPQ4019
Qualcomm Atheros QCA9886
ETH: 2x LAN
LED: 5 (4 RGB at top, 1 RG at back)
BTN: WPS, Reset
UART: 115200 8N1 (dotted Pin = VCC) VCC-TX-RX-GND
MAC addresses
-------------
LAN Label MAC (stored in boarddata1 offset 0x0)
2.4G LAN
5GLow LAN + 3 (stored in boarddata1 offset 0xc)
5GUpper LAN + 2 (stored in boarddata1 offset 0x12)
Installation
------------
Either use the vendor ui upgrade method or nmrpflash to install the
factory image.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20560
Signed-off-by: Robert Marko <robimarko@gmail.com>
This device shares a lot of similarities with the LBR20 - the RBR20 just
misses the LTE modem and its formfactor is alot smaller. Other than that
the LED configuration matches other RBR devices but the RBR20 has less
LEDs than its larger counterparts.
Hardware
--------
SOC: Qualcomm IPQ4019
FLASH: 256MB (Winbond W29N02GVSIAF)
RAM: 512MB (Nanya NT5CC256M16EP-EK)
WIFI: Qualcomm IPQ4019
Qualcomm Atheros QCA9886
ETH: 1x WAN, 1x LAN
LED: 5 (4 RGB at top, 1 RG at back)
BTN: WPS, Reset
UART: 115200 8N1 (dotted Pin = VCC) VCC-TX-RX-GND
MAC addresses
-------------
LAN Label MAC (stored in boarddata1 offset 0x0)
WAN LAN + 1 (stored in boarddata1 offset 0x6)
2.4G LAN
5GLow LAN + 3 (stored in boarddata1 offset 0xc)
5GUpper LAN + 2 (stored in boarddata1 offset 0x12)
Installation
------------
Either use the vendor ui upgrade method or nmrpflash to install the
factory image.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20560
Signed-off-by: Robert Marko <robimarko@gmail.com>
fa62f8a2885c ipq8074: add BDF for Zyxel NWA210AX
7c6b7545f69a qca4019: qca9888: add bdfs for Netgear RBK20
Signed-off-by: Robert Marko <robimarko@gmail.com>
RTL838x+RTL839x both configure a default QoS behavior with a default
mapping. This also needs to be added to RTL93xx to ensure a consistent
behavior:
* Set the default mapping between DSCP and priority: prio = dscp >> 3.
* Set the default mapping between internal priority and queues
* Set uniform prioritization of queues (as with other SoCs)
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Co-developed-by: Sven Eckelmann <se@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20640
Signed-off-by: Robert Marko <robimarko@gmail.com>
If link aggregation with LACP is activated, we must send out the LACP
packets on the physical port and not on a logic port. Otherwise, the per
port packets might be (rebalanced) between the different ports in a link
aggregation group.
Such rebalancing breaks 802.3ad and will leave ports in a churned state.
Fixes: 8c42e63a69 ("realtek: rtl93xx: fix incorrect destination port selection")
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20728
Signed-off-by: Robert Marko <robimarko@gmail.com>
If ports of a RTL93xx switch are not added to a port matrix then they are
not used for the link aggregation. As result, communication will then just
break on non-primary interfaces.
This can be reproduced in balanced-xor and 802.3ad bandwidth mode.
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20729
Signed-off-by: Robert Marko <robimarko@gmail.com>
Commit 56e9a73d0b added support for configuring the SerDes polarity for
both RTL930X and RTL931X. Based on the code in the Realtek SDK in [1]
and [2], in both cases the same register bits are set. Thus, a common
implementation was provided which worked with e.g. USXGMII or 10GBase-R
configured SerDes.
However, after further tests, a strange issue occured where it didn't
work that well for all SerDes configurations. While running fine for
10GBase-R links on two adjacent SerDes, it didn't for 1000Base-X links
on one of two adjacent SerDes with the link not being detected as a
symptom.
Diving into the SDK again revealed that the referenced implementation of
polarity configuration is (by accident or by purpose) misleading. While
[1] and [3] for RTL930X match, [2] and [4] for RTL931X actually don't.
[4] writes the bits for the 1G polarity setting on different background
SerDes, thus in another frontend page.
Split implementations for RTL930X and RTL931X again and adjust the one
for RTL931X according to [4]. This resolves the issues with 1000Base-X
behavior.
[1] 69d2890a2e/sources/rtk-xgs1210/src/hal/phy/phy_rtl9300.c (L1384)
[2] 69d2890a2e/sources/rtk-xgs1210/src/hal/phy/phy_rtl9310.c (L3479)
[3] 69d2890a2e/sources/rtk-xgs1210/src/dal/longan/dal_longan_construct.c (L2246)
[4] 69d2890a2e/sources/rtk-xgs1210/src/dal/mango/dal_mango_construct.c (L1550)
Fixes: 56e9a73d0b ("realtek: pcs: rtl93xx: provide proper SerDes polarity
configuration")
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20767
Signed-off-by: Robert Marko <robimarko@gmail.com>
The MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac) currently comes up
with random MAC addresses. Assign the MAC addresses from hard_config for
LAN and WAN ports.
Fixes: c2140e32ce ("ath79: add support for MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac)")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://github.com/openwrt/openwrt/pull/20782
Signed-off-by: Robert Marko <robimarko@gmail.com>
This handles the case when 'wpad' or 'wpad-mini' package is used which is
missing WPA3 support. This makes it impossible to use ucode wifi-scripts
on such APs as it will raise an error:
daemon.err hostapd: Line 87: unknown configuration item 'sae_password_file'
This also achieves parity with what is currently happening with old wifi-scripts.
The behavior now matches.
Fixes: https://github.com/openwrt/openwrt/issues/20781
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20784
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add mt7987-2p5g-phy-firmware to DEVICES_PACKAGES of the MT7987A RFB as
well as the BananaPi R4 Lite.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
$ git log --no-merges --pretty=oneline --abbrev-commit 20251021..20251111
fcf22f50 rtl_bt: Update RTL8922A BT USB firmware to 0x41C0_C905
c0af6c70 linux-firmware: add firmware for mt7987 internal 2.5G ethernet phy
a50c068b rtw88: 8822b: Update firmware to v30.20.0
e5606bd7 rtl_nic: add firmware rtl8125k-1
c5831f31 ASoC: tas2781: Update dsp firmware for HP and ASUS projects
ad907cca Revert "Merge branch 'robot/patch-0-1762671757' into 'main'"
d665e29c ASoC: tas2781: Update dsp firmware for HP and ASUS projects
213080ae amdgpu: DMCUB updates for various ASICs
23cf7dbb amdgpu: DMCUB updates for various ASICs
95cd295e qcom: add SOCCP firmware for kaanapali platform
9444af1a xe: Update GUC to v70.53.0 for BMG, LNL, PTL
f2a23165 i915: Update GUC to v70.53.0 for DG2, MTL
4dedd6cb rtw89: 8851b: update fw to v0.29.41.5
84cc37f3 rtw89: 8852b: update fw to v0.29.128.0 with format suffix -2
3ab5b9e5 rtw89: 8852b: update fw to v0.29.29.14
1b1c14bb Revert "rtw89: 8852b: update fw to v0.29.128.0"
9a0d0ed6 rtw89: 8852bt: update fw to v0.29.127.0 with format suffix -1
be71e790 rtw89: 8852bt: update fw to v0.29.122.1
b6252a03 Revert "rtw89: 8852bt: update fw to v0.29.127.0"
a976b0aa linux-firmware: Update firmware file for Intel BlazarU core
5a689a2f linux-firmware: Update firmware file for Intel BlazarI core
77425784 linux-firmware: Create audio folder in ti folder, and move all the audio firmwares into it
e189b618 amdgpu: DMCUB updates for various ASICs
646d97f5 linux-firmware: Update WHENCE for microcode_amd_fam19h.bin
e637542f linux-firmware: Update AMD cpu microcode
0fc31ad6 linux-firmware: update firmware for MT7925 WiFi device
b63c322f mediatek MT7925: update bluetooth firmware to 20251015213201
35e54243 rtl_bt: Add firmware and config files for RTL8761CUV
ad915447 linux-firmware: Update AMD cpu microcode
7bcedf5c qcom: add ADSP firmware for kaanapali platform
728e9243 amdgpu: DMCUB updates for various ASICs
05105d24 linux-firmware: Renaming the file to cover a wide range of HP Lunar Lake system.
b582532d mediatek MT7920: update bluetooth firmware to 20251020151255
33d0511d linux-firmware: update firmware for MT7922 WiFi device
c2087f88 linux-firmware: update firmware for MT7920 WiFi device
3a49a735 amd-ucode: Fix minimum revisions in README
0de0cd7f cirrus: cs35l41: Rename various Asus Laptop firmware files to not have Speaker ID
93c92978 mediatek MT7922: update bluetooth firmware to 20251020143443
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Use skb->encapsulation flag instead of skb_tnl_header_len() to detect
encapsulated packets. Prevents false positives on non-encapsulated packets.
Reported-by: Mason-cw Chang (張哲維) <Mason-cw.Chang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Only set rsn_override_key_mgmt when rsn_override is enabled.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When encryption is set to 'sae' without explicit pairwise cipher in
non-HE/EHT mode, both the main RSNE and override RSNE would advertise
identical parameters (SAE+CCMP+MFP=2), adding unnecessary overhead.
Check that the pairwise ciphers differ before enabling override. This
preserves the intended behavior for HE/EHT modes (GCMP-256+CCMP vs CCMP)
while avoiding pointless override IEs.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The function was using phydev.name (e.g., "phy0.0") instead of
phydev.phy (e.g., "phy0") when calling wpa_supplicant.phy_set_macaddr_list.
This is inconsistent with all other wpa_supplicant ubus calls in the same
file which correctly use phydev.phy.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When an MLO interface specifies multiple radios and the first radio
is disabled, the MLO configuration was never created because the code
only attempted to create it when processing the first device in the
list (which gets skipped if disabled).
Fix by creating the MLO config for the first enabled device instead
of only when processing dev_names[0].
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Assign the address at wdev create time, similar to legacy interfaces.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ensure that the 4addr flag is passed to phy.wdev_add.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Usage of strlcpy results in a compilation error. strscpy is preferred
anyways and equivalent for our case.
Signed-off-by: David Bauer <mail@david-bauer.net>
This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.
For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
CMCC PZ-L8 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on IPQ5000.
Specifications:
- SoC : Qualcomm IPQ5000
- RAM : Integrated 256MiB DDR3L
- Flash : 128 MiB SPI-NAND (ESMT F50D1G41LB)
- WLAN : 2.4/5 GHz 2T2R
- 2.4 GHz : Qualcomm IPQ5000 (SoC)
- 5 GHz : Qualcomm Atheros QCN6102
- Ethernet : 4x 10/100/1000 Mbps
- switch : Qualcomm Atheros QCA8337
- LEDs/Keys (GPIO) : 2x LEDs, 2x Keys
- UART : Through-hole on PCB, 4pins in the middle of the black aluminum heat sink
- assignment : 3.3V, GND,TX, RX (from left to right)
- settings : 115200n8
- Power : 12 VDC, 1 A
Flashing Instructions:
1. SSH Method
(1) Enable SSH on the stock firmware
a. Version 501.8 and 501.9:
Log in to http://192.168.10.1 with the password on the sticker
Append "/admin/system/admin" to the URL and press Enter
Delete "Dropbear instance", click "Add instance", then "Save and Apply"
Reboot the router
b. Version 501.11 and 501.12:
While the router is running the stock firmware, press and hold the reset button for 20-30 seconds
Open http://192.168.10.1:56781 and login with username "root" and the password on the sticker
Run "vi /etc/config/dropbear" and delete the line "option enable '0'"
Reboot the router
(2) Upload the factory.ubi file to router's /tmp directory (using scp or wget)
and execute the following commands in the router's shell
export rootfs=$(cat /proc/mtd | grep rootfs | grep -v _ | cut -d: -f1)
ubidetach -f -p /dev/${rootfs}
ubiformat /dev/${rootfs} -y -f /tmp/factory.ubi
2. U-Boot Method using UBI Image
Place the factory.ubi file on your TFTP server, enter U-Boot CLI and exec these commands
tftpboot <your_tftp_server_ip>:factory.ubi
flash rootfs
reset
3. U-Boot Method using initramfs Image
(1) Place the openwrt-*-initramfs-fit-uImage.itb file on your TFTP server
and rename it to initramfs.bin
(2) Enable serial console, enter to U-Boot CLI and exec these commands
tftpboot <your_tftp_server_ip>:initramfs.bin
bootm
(3) Once boot completed, upload the sysupgrade.bin file to router's /tmp directory
(using scp or wget) and execute the following command in openwrt shell
sysupgrade -n /tmp/sysupgrade.bin
Switching to the Stock Firmware:
Please follow the commit 3b7d72bc2e
Partition Layout (Stock Firmware):
0x000000000000-0x000000080000 : "0:SBL1"
0x000000080000-0x000000100000 : "0:MIBIB"
0x000000100000-0x000000140000 : "0:BOOTCONFIG"
0x000000140000-0x000000180000 : "0:BOOTCONFIG1"
0x000000180000-0x000000280000 : "0:QSEE"
0x000000280000-0x000000380000 : "0:QSEE_1"
0x000000380000-0x0000003c0000 : "0:DEVCFG"
0x0000003c0000-0x000000400000 : "0:DEVCFG_1"
0x000000400000-0x000000440000 : "0:CDT"
0x000000440000-0x000000480000 : "0:CDT_1"
0x000000480000-0x000000500000 : "0:APPSBLENV"
0x000000500000-0x000000640000 : "0:APPSBL"
0x000000640000-0x000000780000 : "0:APPSBL_1"
0x000000780000-0x000000880000 : "0:ART"
0x000000880000-0x000000900000 : "0:TRAINING"
0x000000900000-0x000004300000 : "rootfs"
0x000004300000-0x000007d00000 : "rootfs_1"
Notes:
This device is almost the same as ELECOM WRC-X3000GS2, including partition layout and the dual-boot feature.
Known Issues:
- All Wi-Fi related peripherals are disabled in device tree, since 256 MiB RAM is too few for ath11k.
- This device has another version with nand flash FM25SL01, which is not supported at the moment.
https://github.com/immortalwrt/immortalwrt/blob/master/target/linux/mediatek/patches-6.12/342-mtd-spinand-Support-fmsh.patch
MAC Addresses:
Interface MAC Address Location (binary)
LAN A4:39:B6:xx:xx:9D (0:ART, 0x00-0x05)
WAN A4:39:B6:xx:xx:9E (0:ART, 0x06-0x0B)
2.4 GHz A4:39:B6:xx:xx:9F (0:ART, 0x0C-0x11)
5 GHz A4:39:B6:xx:xx:A0 (0:ART, 0x12-0x17)
Signed-off-by: Chang Liu <jssqliuchang@gmail.com>
`$(MAKE) package_index` will generate Packages.sig if signing is enabled, and Packages.sig is always newer than Packages.gz, cause repeated generation of package index on next build. So we should ignore Packages.sig.
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
When using wpad-openssl/wpad-basic-openssl, wpa_supplicant/hostapd may not be ready because of openssl.
This cause supplicant.setup and hostapd.setup to be failed.
Therefore, wait for wpa_supplicant/hostapd to be ready before supplicant.setup and hostapd.setup.
Run-tested: mediatek/filogic GL-MT3000
fixes: #20361
Signed-off-by: Andy Chiang <AndyChiang_git@outlook.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use stationary_ap configuration for 6GHz AX AP (not only BE).
This change fixes the 6GHz network not visible issue for QCN9024.
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Add support for Python version 3.13 to include/prereq-build.mk.
One of the reasons for this change is that
Ubuntu 25.04 ships with Python 3.13 as default version.
Let's support it.
Signed-off-by: Kacper Ludwinski <kacper@ludwinski.dev>
Link: https://github.com/openwrt/openwrt/pull/20735
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
When building in environments that set IS_TTY, the feeds script does not
honor it and passes a hardcoded value to scan.mk, causing unwanted
control characters to appear in stdout.
This commit addresses the issue by checking IS_TTY and MAKE_TERMOUT
variables and uses their values if defined.
Closes#8039
Signed-off-by: Ernestas Kulik <ernestas.k@iconn-networks.com>
Link: https://github.com/openwrt/openwrt/pull/20743
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add MODULES_DIR MACRO for provider useful if the relevant package
require to define the default OpenSSL MODULES_PATH.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
