Align the functions with rest of driver.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21685
Signed-off-by: Robert Marko <robimarko@gmail.com>
Align the functions with rest of driver.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21685
Signed-off-by: Robert Marko <robimarko@gmail.com>
There are some code pieces that determine the SoC version of the
running system. For RTL83xx it reads out the registers, for RTL93xx
it simply uses a constant value. Without any consumer of this data
drop it.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21684
Signed-off-by: Robert Marko <robimarko@gmail.com>
No one has looked into the firmware based RTL8218B initializations
for a long time. Instead the basic setup sequences have evolved
so that they can start the RTL8218B PHY from scratch. See
19bc6e8 ("realtek: phy: add basic RTL8218B setup")
4fa90d8 ("realtek: phy: enhance RTL8218B initialization")
Drop the legacy coding.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21679
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add two missing $$ in the factory image build pipeline for MR6350
Signed-off-by: Zeyu Dong <dzy201415@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21682
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit enables PoE output on port 1 of the Meraki MR30H if
the device is powered via 802.3at PoE.
No PoE output is enabled if the device is powered via 802.3af PoE,
as there is insufficient power.
Signed-off-by: Hal Martin <hal.martin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20645
Signed-off-by: Robert Marko <robimarko@gmail.com>
Now that DCB is enabled by default, it makes sense to include it on
lan969x.
While we are here, lets include ip-bridge as these devices are switches
and the Busybox applet does not expose enough functionality.
These devices have no space constraints.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Switchdev driver used by microchipsw supports DCB and has not storage
constraints, so enable kernel and driver DCB support by default.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
The Raidsonic devices do not use a 2048k kernel "Kern"
partition like the Storlink reference designs. Instead
it uses a 3072k partition to fit a slightly
larger kernel.
Sadly the current OpenWrt Gemini kernel is still bigger
than 3072k so we need to make use of the Ramdisk
partition as well.
Create a special "copy-kernel" version that can deal
with the Raidsonic 3072k kernels. Tested on the
Raidsonic IB-4220-B booting kernel v6.12.66.
Fix a copy/paste error in the image generation makefile
while we are at it.
Link: https://github.com/openwrt/openwrt/pull/21686
Signed-off-by: Linus Walleij <linusw@kernel.org>
Specifications:
* SoC: Qualcomm IPQ6018/AP-CP03-C1 (64-bit Quad-core Arm Cortex-A53 @ 1.2 GHz)
* RAM: 2x Zentel A3T4GF40BBF-HP (1 GiB DDR3-1866 (13-13-13))
* Serial Port: 1v8 TTL 115200n8
* Wi-Fi: Qualcomm QCN5022 (802.11ax/b/g/n)
* Wi-Fi: Qualcomm QCN5052 (802.11ac/ax/n)
* Ethernet: RTL8211FS (10/100/1000BASE-T)
* Flash: GigaDevice PSR1GA30DT (128 MiB)
* LEDs: 1x Blue Status (GPIO 35 Active High)
* Buttons: 1x Reset (GPIO 9 Active Low)
* FCCID: 2AXJ4EAP620HDV3
* UART: 4-pin unpopulated header by the J1 footprint
Installation Instructions (Serial+TFTP):
1. Locate the J1 footprint which contains 4 unpopulated pins
where starting from the arrow, the pins are TX, RX, VCC and GND
respectively.
2. Connect a 1v8 TTL port to the 4 pins. Ensure RX and TX are crossed
over.
3. Copy openwrt-qualcommax-ipq60xx-tplink_eap620-hd-v3-initramfs-uImage.itb
to your TFTP server.
4. Power up the AP and hold Ctrl+B in the serial console (115200n8) until autoboot is halted.
5. Run the following commands in the U-boot prompt:
IPQ6018# setenv serverip <TFTP server addr>
IPQ6018# setenv ipaddr <addr of the AP>
IPQ6018# tftpboot 0x44000000 openwrt-qualcommax-ipq60xx-tplink_eap620-hd-v3-initramfs-uImage.itb
IPQ6018# bootm 0x44000000
You may need to type Ctrl+C and Enter before running these commands
to clear invisible characters from the buffer.
6. Run the following command in a terminal to copy the sysupgrade image
to be installed (check IP address):
$ scp -O openwrt-qualcommax-ipq60xx-tplink_eap620-hd-v3-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/
7. Activate the OpenWrt serial console and run the following commands:
# cd /tmp
# sysupgrade -n openwrt-qualcommax-ipq60xx-tplink_eap620-hd-v3-squashfs-sysupgrade.bin
8. The AP will reboot and OpenWrt will be successfully installed.
Installation Instructions (Web UI method):
1. Set up the device using the vendor's web UI. Navigate to
Management->SSH and enable the "SSH Login" checkbox. Select "Save".
2. Connect to the machine via SSH:
$ ssh -o hostkeyalgorithms=ssh-rsa <ip_of_device>
3. Disable signature verification:
$ cliclientd stopcs
4. Rename the "-web-ui-factory" image to something less than 63
characters, maintaining the ".bin" suffix.
5. Go to System -> Firmware Update.
Under "New Firmware File", click "Browse" and select the image.
Select "Update" and confirm by clicking "OK".
6. If the update fails, the web UI should show an error message.
Otherwise, the device should reboot into OpenWrt.
Device support followed from EAP620HD v2 and eap6xx-outdoor for DTS.
Links: openwrt/openwrt#18227
Signed-off-by: John Christoforidis <github@yanny.dev>
Link: https://github.com/openwrt/openwrt/pull/21467
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update the econet-eth driver to a new version which is of
sufficient quality that it is realistic to think about upstreaming.
This version is now NAPI based, collects stats, downloads without
dropped packets anymore, has debugfs introspection, and can be
unloaded and reloaded (providing the reset controller is present).
PR #21545 is recommended but not required, without this the
ethernet driver will log a warning on startup because it can't get
the resets and it will be impossible to unload and reload the
driver without a reboot. However, the PoC driver was not capable of
reloading so this is not a regression.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://github.com/openwrt/openwrt/pull/21557
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Compilation currently spits this message:
WARNING: modpost: vmlinux: section mismatch in reference:
rtl83xx_sw_probe+0x6a4 (section: .text.rtl83xx_sw_probe)
-> rtl83xx_setup_qos (section: .init.text)
That means that we have a "normal" function caller (can be
called during the whole uptime) and a "initialization" function
callee (only available during init.
Fix this and directly fix the unwanted family checks.
Fixes: a91c3ab ("realtek: dsa: avoid use-after-free")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21690
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch was manually edited but not refreshed.
Fixes: 794b4dee65 ("uboot-mediatek: add 8g check to bpi-r4 environment for bl2")
Fixes: 46ee5209aa ("uboot-mediatek: add command for getting size of ram")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21693
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add a PHY ID for Aquantia AQR813 which is an Octa-PHY found in some
Realtek switches.
Add another PHY ID for another revision of AQR113C, also found in some
Realtek switches.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21515
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Apply the PHY polling configuration for RTL931x too, as previously
implemented for RTL930x. This is needed for several PHYs on that
platform to function properly.
Add another flag called 'force_res' to the phy_info struct which is for
RTL931x only. The SDK mentions this as a flag to force polling the
Realtek proprietary PHY status resolution register. Effectively, this
changes the polling to proprietary format instead of standard format,
and sets an enable bit in another private polling register field.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21515
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reading the PHY ID to assign a PHY config is currently simple. For C45
two MDIO reads of a hardcoded MMD are done to get the standard PHY ID
registers. MMD 31 (MMD_VEND2) is used for that purpose, assuming there
will be a valid PHY ID stored in this MMD in all cases. However, with
Aquantia AQR813 there's at least one example for which this isn't true.
This PHY returns 0 for the PHY ID in MMD_VEND2, instead MMD_VEND1 would
have the correct ID.
Enhance reading the PHY by accessing a common set of MMDs of which most
PHY at least implement one and have a valid PHY ID in. To keep overhead
low, do not scan all MMDs. As soon as a valid PHY ID is found, exit and
use that. This is similar to the kernel logic, jsut reduced to fewer
MMDs.
Also handle possible errors coming from MDIO reads to avoid reading garbage.
While at it, move reading the PHY ID to a separate function to not
pollute the poll fixup retrievel function.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21515
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Add pending support for the HINLINK H66K / H68K.
Tested on HINLINK H66K, H68K and H68K-V2.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/21270
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Realtek mdio driver does not need to track a separate lock.
Rely on the default kernel mdio bus lock instead.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21529
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Refactor RTL931x mdio commands to use the new helper function.
Remove unneeded goto and debug statements.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21529
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Refactor RTL930x mdio commands to use the new helper function.
Remove unneeded goto and debug statements.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21529
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Refactor RTL839x mdio commands to use the new helper function.
Remove unneeded goto and debug statements.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21529
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Realtek mdio bus works similar for all devices with only
minor family specific differences. Basically command issuing
follows a generic style. Write command type and a trigger.
Afterwards wait until the trigger flag goes back to zero (aka
"command complete"). Unify this sequence in a central helper.
RTL838x read/write callers of this helper use a strange style of
error handling by issuing goto statements. Refactor this for better
readability. Additionally remove all debug prints. These are not
needed as the central read/write handlers provide a common logging
mechanism.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21529
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This adds the TIMERLAT_TRACER kernel configuration option. The timelat
tracer helps to find sources of wakeup latencies of real-time threads.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/21413
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This adds the OSNOISE_TRACER kernel configuration option. The osnoise
tracer allows to track interference experienced by an application due to
activities inside the operating system (like NMIs, IRQs ...).
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/21413
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This adds the HWLAT_TRACER kernel configuration option. The hwlat tracer
allows to detect hardware latencies.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/21413
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Loongarch64 currently uses the PREEMPT_VOLUNTARY model, which is not
aligned with OpenWrt's default. Switch to PREEMPT_NONE for consistency with
OpenWrt's default configuration. Preemption model selection is now
available via menuconfig for further customization.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/21413
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Mediatek/mt7623 currently uses the PREEMPT model, which is not aligned with
OpenWrt's default. Switch to PREEMPT_NONE for consistency with OpenWrt's
default configuration. Preemption model selection is now available via
menuconfig for further customization.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/21413
[Added some config options again]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Gemini currently uses the PREEMPT model, which is not aligned with
OpenWrt's default. Switch to PREEMPT_NONE for consistency with OpenWrt's
default configuration. Preemption model selection is now available via
menuconfig for further customization.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/21413
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Layerscape currently uses the PREEMPT model, which is not aligned with
OpenWrt's default. Switch to PREEMPT_NONE for consistency with
OpenWrt's default configuration. Preemption model selection is now
available via menuconfig for further customization.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/21413
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Introduce preemption model selection with PREEMPT_NONE as the default.
PREEMPT_NONE is the traditional Linux preemption model and also the best
choice for servers.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/21413
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add check for 8g and replace filename for bl2 to install the right file.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://github.com/openwrt/openwrt/pull/21437
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add command which gets ramsize and write it to env variable.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://github.com/openwrt/openwrt/pull/21437
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This allows builds for Bananapi R4 (Pro) with 8GB RAM.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://github.com/openwrt/openwrt/pull/21437
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This allows builds for Bananapi R4 (Pro) with 8GB RAM.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://github.com/openwrt/openwrt/pull/21437
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The `syn_flood` option name is deprecated, `synflood_protect` should
be used instead. firewall3 and firewall4 both support this option since
a long time. LuCI already replaces the option name.
0abcb39b62
Suggested-by: rparge in OpenWrt forum
Link: https://github.com/openwrt/openwrt/pull/21642
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
KERNEL_DCB was introduced in 40f1db9cb1, however the dcb utility is not
enabled for iproute2. Although DCB is not generally available among
Ethernet cards, not having the dcb utility renders it completely
unchangeable.
On aarch64, it takes ~85.3KiB.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21606
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The indicator is unused by default and not associated
with the wan port. So let’s fix this.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a cosmetic change. There is no need to use mac
address increment/decrement in the dts on these devices,
so this can be simplified.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
In the original DTS from the device firmware, there are
no entries that enable SPI calibration. Therefore, it
should be disabled.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Keenetic devices always use the WAN port MAC address as
the MAC address printed on the label.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21635
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Any ftpd package such as vsftpd or atftpd (are there others?) should
create their own unprivileged user. Both of the aforementioned
packages do not even use this ftp user and run as root. That should be
addressed in separate commits.
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/19418
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Gemini reference design-derived devices uses a partition
format which is predictable and we can exploit this to offer
some proper upgrade path.
The kernel for these contains a hack to use this partition
format unaltered by combining the partitions "Kern" and "Ramdisk"
to one image with all of the kernel+ramdisk in memory.
Then the "Application" which is used for the rootfs go into its
own partition.
Standard flash layout:
Kern 2048k |
Ramdisk 6144k | = 9216k
Application 6144k | = 15360k
Following the pattern of the factory image we create three
images named zImage, rd.gz and hddapp.tgz (these filenames
are misleading! They are just required by the old firmware.)
and flash each individually with "mtd" during upgrades.
Since the IB-4220-V has a different layout with a bigger kernel
space we parameterize this so we can handle this too. (More
fixes are needed for that device though.)
A way to upgrade older OpenWrt on these platforms to the latest
and greatest will be to copy the file
target/linux/gemini/base-files/lib/upgrade/platform.sh
to /lib/upgrade/platform.sh
on your running system and then run sysupgrade from the image
produced after this patch.
The script is picky to sanity check the partitions before
commencing upgrade.
This was tested with a full sysupgrade on the iTian SQ201.
Link: https://github.com/openwrt/openwrt/pull/21680
Signed-off-by: Linus Walleij <linusw@kernel.org>
A phy is configured in two stages
- phy_probe() for setup of structures
- config_init() for device setup (after reset)
RTL8214FC is a combo phy and the currently active port can be switched
with the SFP helper functions that are triggered during SFP insertion
and removal. In case a fibre SFP is inserted while booting the SFP
trigger is run between the above mentioned stages. During the final
setup in config_init() the phy is reset to the copper port. Thus no
link is available on fibre and the SFP must be reinserted for normal
operation.
For a consistent behaviour the fibre/copper port setup must run before
the SFP probing and not afterwards. Move the setup code from config_init()
into phy_probe().
Fixes: 10ae743 ("realtek: phy: simplify RTL8214FC configuration")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21582
Signed-off-by: Robert Marko <robimarko@gmail.com>
There are some shortcomings in rtl8214fc_media_set()
- It always uses the mdio raw page (4095) of RTL838x for writes.
That is wrong when the phy is attached to an RTL839x (raw = 8191)
- It uses the internal write only extended page companion (29)
- The extended page content is not preserved
Fix the three issues.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21582
Signed-off-by: Robert Marko <robimarko@gmail.com>
Changing the fibre/copper power of a RTL8214FC changes the
extended page via register 29. This is the write only companion
of register 30. The register is afterwards overwritten to 0.
Use the proper extended page register 30 and preserve its content
during the operation.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21582
Signed-off-by: Robert Marko <robimarko@gmail.com>
