The CLI tools hostapd_cli and wpa_cli are compiled with
`TARGET_LDFLAGS_C` rather than the standard `TARGET_LDFLAGS`.
This variable is empty, leading to global linker options not being
applied.
Set this variable equal to `TARGET_LDFLAGS` right after the package.mk
include to make sure global linker options are applied, but local options
such as linking to crypto libraries are not.
Signed-off-by: Matthias Van Parys <matthias.vanparys@softathome.com>
Link: https://github.com/openwrt/openwrt/pull/20345
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add TARGET_LDFLAGS to MYLDFLAGS make sure that the required flags are used
during the compilation.
Signed-off-by: Jonathan Luijsmans <jonathan.luijsmans_ext@softathome.com>
Link: https://github.com/openwrt/openwrt/pull/20642
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Some Marvell AP firmware used with mwl8k misbehaves when beacons do not
contain the DSSS Parameter Set (WLAN_EID_DS_PARAMS) with the current
channel. When hostapd/mac80211 omits this element (which is valid on
some bands), the firmware may report bogus RX channel information and AP
mode becomes unusable.
Backport the upstream fix that ensures beacons always carry the DSSS
Parameter Set for mwl8k: when setting the beacon, detect if the element
is missing and inject it after SSID and Supported Rates (per spec
ordering). This mirrors behaviour in newer Marvell drivers and restores
stable operation.
Tested on Linksys EA4500 (88W8366).
Fixes: openwrt/openwrt#19088
Link: https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless.git/commit/?id=c4e1ac09ee1c750890e36cb1f841f25518f23589
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20757
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add support for the Radxa ROCK 2A/2F board.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20375
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Added USB boot support and eMMC r/w fixes for RK3528.
Refreshed upstreamed patches while at it.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20375
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently there's no usable mainline (open source) TF-A implementation
for rk3528 SoCs, so pack the prebuilt firmware from the vendor.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20375
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently the path for setting 20MHz doesn't set ht_capab to '' at the
beginning which results in null in ht_capab in hostapd.conf.
Fix this by setting config.ht_capab to '' for 20MHz htmode.
Fixes: #20762
Signed-off-by: Zhi-Jun You <hujy652@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/20768
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
cbc8ff0e6226 github: ci: add powerpc arch
8eba02233133 github: ci: add cmake build and source directories
5f3104ea17ae github: ci: disable json-c tests
27ff42cd40f9 scripts: devel-build: disable json-c tests
e0a9d02b52d1 dhcpv6: DHCPV6_OPT_INFO_REFRESH contains a 4 byte option
5a02da9c1200 dhcpv6: use compile time resolved sizeof(struct in6_addr) for IPv6 values
cf203ceb3fc8 dhcpv6: set a static define for DUID max length
3627e85d1540 dhcpv6: set static defines for DHCPv6 option header size
ecb9a0243e77 odhcp6c: RFC comments
c284c587d37d all: spell fixes
1259a32d7e4d dhcpv6: dhcpv6_handle_reply switch case handling
227280a37853 dhcpv6: dhcpv6_handle_advert; migrate if blocks to switch case
b253f8907e72 dhcpv6: migrate to switch case for dhcpv6_handle_reply
61a54db802cb dhcpv6: migrate to switch case for dhcpv6_handle_reply
49c64bbe00ba all: drop CER_ID
16ce83075b2e dhcpv6: refactor u8 and u16 to u32 to avoid boolean coercion
e5690c1f13...cbc8ff0e62
Options related to homenet (EXT_CER_ID) have been removed, so drop them from
the package.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20791
This pull request is based on
- the discussions in https://forum.openwrt.org/t/adding-openwrt-support-for-linksys-mr6350
- https://github.com/openwrt/openwrt/pull/11405 which added support for similar devices.
Device Specs:
- IPQ4019
- Quad Core CPU
- 256 MB RAM
- 256 MB FLASH
- 4 LAN ports, 1 WAN port
- 2.4GHz (802.11n) and 5GHz (802.11c) wifi
- 3 LEDs (Red, blue, green) which are routed to one indicator at the top of the case
- 2 buttons (Reset, WPS)
Disassembling the device:
- There are 4 screws at the bottom of the device which must be removed
- Two are under the fron rubber feets
- Two are under the labels in the back (corner next to the rear rubber feets)
Serial interface:
- The serial interface is already populated on the device with a 6-pin header
- Pin 1 is next to the heatsink
- Pinout: 1: 3.3V, 2: TX, 3: RX, 4: unknown, 5: GND, 6: GND
- Settings: 115200, 8N1
Migrating to OpenWrt requires multiple steps:
- Load and boot the initramfs image
- Adapt U-Boot settings to support bigger kernels
- Flash the sysupgrade image
Load and boot initramfs:
- Connect serial interface
- Set up a TFTP server on IP 192.168.1.254
- Copy openwrt-ipq40xx-generic-linksys_mr6350-initramfs-zImage.itb to TFTP server
- Rename file to C0A80101.img
- Boot up the device and stop in U-Boot
- Run the following U-Boot commands after a link has been established:
tftp
bootm
- Initramfs image is started now.
Adapt U-Boot settings to support bigger kernels:
- Run "fw_printenv" in the initramfs image after booting
- There should be an entry kernsize=300000 which indicates the maximum size for the kernel is 3MB
- Execute "fw_setenv kernsize 500000" to increase the max kernel size to 5MB
- Check that the change are applied with "fw_printenv"
Flash the sysupgrade image:
- Default sysupgrade routine either with a initramfs image containing LuCI or via command line.
Revert back to OEM firmware:
- Only tested with FW_MR6350_1.1.3.210129_prod.img
- Flash the OEM firmware via sysupgrade
- Forced update is required
Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17977
Signed-off-by: Robert Marko <robimarko@gmail.com>
This device has only half the flash and ram of the RBR20. It also has
two lan ports instead of wan and lan.
Hardware
--------
SOC: Qualcomm IPQ4019
FLASH: 128MB (Winbond W29N01HVSINF)
RAM: 256MB (Winbond W632GU6MB-12)
WIFI: Qualcomm IPQ4019
Qualcomm Atheros QCA9886
ETH: 2x LAN
LED: 5 (4 RGB at top, 1 RG at back)
BTN: WPS, Reset
UART: 115200 8N1 (dotted Pin = VCC) VCC-TX-RX-GND
MAC addresses
-------------
LAN Label MAC (stored in boarddata1 offset 0x0)
2.4G LAN
5GLow LAN + 3 (stored in boarddata1 offset 0xc)
5GUpper LAN + 2 (stored in boarddata1 offset 0x12)
Installation
------------
Either use the vendor ui upgrade method or nmrpflash to install the
factory image.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20560
Signed-off-by: Robert Marko <robimarko@gmail.com>
This device shares a lot of similarities with the LBR20 - the RBR20 just
misses the LTE modem and its formfactor is alot smaller. Other than that
the LED configuration matches other RBR devices but the RBR20 has less
LEDs than its larger counterparts.
Hardware
--------
SOC: Qualcomm IPQ4019
FLASH: 256MB (Winbond W29N02GVSIAF)
RAM: 512MB (Nanya NT5CC256M16EP-EK)
WIFI: Qualcomm IPQ4019
Qualcomm Atheros QCA9886
ETH: 1x WAN, 1x LAN
LED: 5 (4 RGB at top, 1 RG at back)
BTN: WPS, Reset
UART: 115200 8N1 (dotted Pin = VCC) VCC-TX-RX-GND
MAC addresses
-------------
LAN Label MAC (stored in boarddata1 offset 0x0)
WAN LAN + 1 (stored in boarddata1 offset 0x6)
2.4G LAN
5GLow LAN + 3 (stored in boarddata1 offset 0xc)
5GUpper LAN + 2 (stored in boarddata1 offset 0x12)
Installation
------------
Either use the vendor ui upgrade method or nmrpflash to install the
factory image.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20560
Signed-off-by: Robert Marko <robimarko@gmail.com>
fa62f8a2885c ipq8074: add BDF for Zyxel NWA210AX
7c6b7545f69a qca4019: qca9888: add bdfs for Netgear RBK20
Signed-off-by: Robert Marko <robimarko@gmail.com>
This handles the case when 'wpad' or 'wpad-mini' package is used which is
missing WPA3 support. This makes it impossible to use ucode wifi-scripts
on such APs as it will raise an error:
daemon.err hostapd: Line 87: unknown configuration item 'sae_password_file'
This also achieves parity with what is currently happening with old wifi-scripts.
The behavior now matches.
Fixes: https://github.com/openwrt/openwrt/issues/20781
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20784
Signed-off-by: Robert Marko <robimarko@gmail.com>
$ git log --no-merges --pretty=oneline --abbrev-commit 20251021..20251111
fcf22f50 rtl_bt: Update RTL8922A BT USB firmware to 0x41C0_C905
c0af6c70 linux-firmware: add firmware for mt7987 internal 2.5G ethernet phy
a50c068b rtw88: 8822b: Update firmware to v30.20.0
e5606bd7 rtl_nic: add firmware rtl8125k-1
c5831f31 ASoC: tas2781: Update dsp firmware for HP and ASUS projects
ad907cca Revert "Merge branch 'robot/patch-0-1762671757' into 'main'"
d665e29c ASoC: tas2781: Update dsp firmware for HP and ASUS projects
213080ae amdgpu: DMCUB updates for various ASICs
23cf7dbb amdgpu: DMCUB updates for various ASICs
95cd295e qcom: add SOCCP firmware for kaanapali platform
9444af1a xe: Update GUC to v70.53.0 for BMG, LNL, PTL
f2a23165 i915: Update GUC to v70.53.0 for DG2, MTL
4dedd6cb rtw89: 8851b: update fw to v0.29.41.5
84cc37f3 rtw89: 8852b: update fw to v0.29.128.0 with format suffix -2
3ab5b9e5 rtw89: 8852b: update fw to v0.29.29.14
1b1c14bb Revert "rtw89: 8852b: update fw to v0.29.128.0"
9a0d0ed6 rtw89: 8852bt: update fw to v0.29.127.0 with format suffix -1
be71e790 rtw89: 8852bt: update fw to v0.29.122.1
b6252a03 Revert "rtw89: 8852bt: update fw to v0.29.127.0"
a976b0aa linux-firmware: Update firmware file for Intel BlazarU core
5a689a2f linux-firmware: Update firmware file for Intel BlazarI core
77425784 linux-firmware: Create audio folder in ti folder, and move all the audio firmwares into it
e189b618 amdgpu: DMCUB updates for various ASICs
646d97f5 linux-firmware: Update WHENCE for microcode_amd_fam19h.bin
e637542f linux-firmware: Update AMD cpu microcode
0fc31ad6 linux-firmware: update firmware for MT7925 WiFi device
b63c322f mediatek MT7925: update bluetooth firmware to 20251015213201
35e54243 rtl_bt: Add firmware and config files for RTL8761CUV
ad915447 linux-firmware: Update AMD cpu microcode
7bcedf5c qcom: add ADSP firmware for kaanapali platform
728e9243 amdgpu: DMCUB updates for various ASICs
05105d24 linux-firmware: Renaming the file to cover a wide range of HP Lunar Lake system.
b582532d mediatek MT7920: update bluetooth firmware to 20251020151255
33d0511d linux-firmware: update firmware for MT7922 WiFi device
c2087f88 linux-firmware: update firmware for MT7920 WiFi device
3a49a735 amd-ucode: Fix minimum revisions in README
0de0cd7f cirrus: cs35l41: Rename various Asus Laptop firmware files to not have Speaker ID
93c92978 mediatek MT7922: update bluetooth firmware to 20251020143443
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Only set rsn_override_key_mgmt when rsn_override is enabled.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When encryption is set to 'sae' without explicit pairwise cipher in
non-HE/EHT mode, both the main RSNE and override RSNE would advertise
identical parameters (SAE+CCMP+MFP=2), adding unnecessary overhead.
Check that the pairwise ciphers differ before enabling override. This
preserves the intended behavior for HE/EHT modes (GCMP-256+CCMP vs CCMP)
while avoiding pointless override IEs.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The function was using phydev.name (e.g., "phy0.0") instead of
phydev.phy (e.g., "phy0") when calling wpa_supplicant.phy_set_macaddr_list.
This is inconsistent with all other wpa_supplicant ubus calls in the same
file which correctly use phydev.phy.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When an MLO interface specifies multiple radios and the first radio
is disabled, the MLO configuration was never created because the code
only attempted to create it when processing the first device in the
list (which gets skipped if disabled).
Fix by creating the MLO config for the first enabled device instead
of only when processing dev_names[0].
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Assign the address at wdev create time, similar to legacy interfaces.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ensure that the 4addr flag is passed to phy.wdev_add.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
CMCC PZ-L8 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on IPQ5000.
Specifications:
- SoC : Qualcomm IPQ5000
- RAM : Integrated 256MiB DDR3L
- Flash : 128 MiB SPI-NAND (ESMT F50D1G41LB)
- WLAN : 2.4/5 GHz 2T2R
- 2.4 GHz : Qualcomm IPQ5000 (SoC)
- 5 GHz : Qualcomm Atheros QCN6102
- Ethernet : 4x 10/100/1000 Mbps
- switch : Qualcomm Atheros QCA8337
- LEDs/Keys (GPIO) : 2x LEDs, 2x Keys
- UART : Through-hole on PCB, 4pins in the middle of the black aluminum heat sink
- assignment : 3.3V, GND,TX, RX (from left to right)
- settings : 115200n8
- Power : 12 VDC, 1 A
Flashing Instructions:
1. SSH Method
(1) Enable SSH on the stock firmware
a. Version 501.8 and 501.9:
Log in to http://192.168.10.1 with the password on the sticker
Append "/admin/system/admin" to the URL and press Enter
Delete "Dropbear instance", click "Add instance", then "Save and Apply"
Reboot the router
b. Version 501.11 and 501.12:
While the router is running the stock firmware, press and hold the reset button for 20-30 seconds
Open http://192.168.10.1:56781 and login with username "root" and the password on the sticker
Run "vi /etc/config/dropbear" and delete the line "option enable '0'"
Reboot the router
(2) Upload the factory.ubi file to router's /tmp directory (using scp or wget)
and execute the following commands in the router's shell
export rootfs=$(cat /proc/mtd | grep rootfs | grep -v _ | cut -d: -f1)
ubidetach -f -p /dev/${rootfs}
ubiformat /dev/${rootfs} -y -f /tmp/factory.ubi
2. U-Boot Method using UBI Image
Place the factory.ubi file on your TFTP server, enter U-Boot CLI and exec these commands
tftpboot <your_tftp_server_ip>:factory.ubi
flash rootfs
reset
3. U-Boot Method using initramfs Image
(1) Place the openwrt-*-initramfs-fit-uImage.itb file on your TFTP server
and rename it to initramfs.bin
(2) Enable serial console, enter to U-Boot CLI and exec these commands
tftpboot <your_tftp_server_ip>:initramfs.bin
bootm
(3) Once boot completed, upload the sysupgrade.bin file to router's /tmp directory
(using scp or wget) and execute the following command in openwrt shell
sysupgrade -n /tmp/sysupgrade.bin
Switching to the Stock Firmware:
Please follow the commit 3b7d72bc2e
Partition Layout (Stock Firmware):
0x000000000000-0x000000080000 : "0:SBL1"
0x000000080000-0x000000100000 : "0:MIBIB"
0x000000100000-0x000000140000 : "0:BOOTCONFIG"
0x000000140000-0x000000180000 : "0:BOOTCONFIG1"
0x000000180000-0x000000280000 : "0:QSEE"
0x000000280000-0x000000380000 : "0:QSEE_1"
0x000000380000-0x0000003c0000 : "0:DEVCFG"
0x0000003c0000-0x000000400000 : "0:DEVCFG_1"
0x000000400000-0x000000440000 : "0:CDT"
0x000000440000-0x000000480000 : "0:CDT_1"
0x000000480000-0x000000500000 : "0:APPSBLENV"
0x000000500000-0x000000640000 : "0:APPSBL"
0x000000640000-0x000000780000 : "0:APPSBL_1"
0x000000780000-0x000000880000 : "0:ART"
0x000000880000-0x000000900000 : "0:TRAINING"
0x000000900000-0x000004300000 : "rootfs"
0x000004300000-0x000007d00000 : "rootfs_1"
Notes:
This device is almost the same as ELECOM WRC-X3000GS2, including partition layout and the dual-boot feature.
Known Issues:
- All Wi-Fi related peripherals are disabled in device tree, since 256 MiB RAM is too few for ath11k.
- This device has another version with nand flash FM25SL01, which is not supported at the moment.
https://github.com/immortalwrt/immortalwrt/blob/master/target/linux/mediatek/patches-6.12/342-mtd-spinand-Support-fmsh.patch
MAC Addresses:
Interface MAC Address Location (binary)
LAN A4:39:B6:xx:xx:9D (0:ART, 0x00-0x05)
WAN A4:39:B6:xx:xx:9E (0:ART, 0x06-0x0B)
2.4 GHz A4:39:B6:xx:xx:9F (0:ART, 0x0C-0x11)
5 GHz A4:39:B6:xx:xx:A0 (0:ART, 0x12-0x17)
Signed-off-by: Chang Liu <jssqliuchang@gmail.com>
When using wpad-openssl/wpad-basic-openssl, wpa_supplicant/hostapd may not be ready because of openssl.
This cause supplicant.setup and hostapd.setup to be failed.
Therefore, wait for wpa_supplicant/hostapd to be ready before supplicant.setup and hostapd.setup.
Run-tested: mediatek/filogic GL-MT3000
fixes: #20361
Signed-off-by: Andy Chiang <AndyChiang_git@outlook.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use stationary_ap configuration for 6GHz AX AP (not only BE).
This change fixes the 6GHz network not visible issue for QCN9024.
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
313f344d8436 dlink-sge-image: add support for D-Link DIR-X1860 B1/DIR-X1550 A1
ac7a4abdde7d iptime-crc32: add support for ipTIME AX3000SE
c42a3bc53da8 iptime-crc32: add support for ipTIME AX2002MESH
Link: https://github.com/openwrt/openwrt/pull/20734
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
New Packages / build options:
* sound-midi2: enable MIDI 2.0 / UMP in ALSA MIDI
* sound-midi2-seq: enable MIDI 2.0 / UMP in ALSA sequencer
* sound-midi2-usb: enable USB MIDI 2.0 support
* sound-dynamic-minors: allow more than 8 MIDI devices
More info about ALSA MIDI 2.0:
https://docs.kernel.org/6.12/sound/designs/midi-2.0.html
More info about MIDI 2.0:
https://midi.org/midi-2-0
Signed-off-by: Florian Bomers <github@bome.com>
Link: https://github.com/openwrt/openwrt/pull/20727
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Make it a little bit more consistant, and a bit more idiomatic.
Signed-off-by: David Härdeman <david@hardeman.nu>
Link: https://github.com/openwrt/openwrt/pull/20673
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
The support has been removed from odhcpd, so remove the Makefile options
related to homenet.
Signed-off-by: David Härdeman <david@hardeman.nu>
Link: https://github.com/openwrt/openwrt/pull/20673
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
"system" is used to get the current time zone, "network" is used to get
the global DUID.
Signed-off-by: David Härdeman <david@hardeman.nu>
Link: https://github.com/openwrt/openwrt/pull/20673
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Support for this option has been removed from odhcpd, so remove it in
the defaults as well.
Signed-off-by: David Härdeman <david@hardeman.nu>
Link: https://github.com/openwrt/openwrt/pull/20673
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This exands the list of AKMs to display:
- display the hash when larger than the default (loosely based on
what hostapd uses in config).
- renaming 'WPA PSK2' to 'WPA PSK-SHA256' as a result
- separate FILS suites from plain 802.1x
- add suites 3, 5, 9, 19, 20, 24, and 25
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20686
Signed-off-by: Robert Marko <robimarko@gmail.com>
Escape control characters when displaying ESSID. It is not uncommon for
a scan to encounter invalid SSIDs, containing binary data. Escape the
control characters to avoid messing the display (ENQ is particularly
bothersome).
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20686
Signed-off-by: Robert Marko <robimarko@gmail.com>
This adds the ESSID: line to the iwinfo scan results.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20686
Signed-off-by: Robert Marko <robimarko@gmail.com>
Swig 4.3.0 has changed SWIG_Python_AppendOutput, which now requires an
additional parameter `is_void`. SWIG_AppendOutput remains unchanged.
This was fixed upstream in u-boot/u-boot@a63456b
```
scripts/dtc/pylibfdt/libfdt_wrap.c: In function ‘_wrap_fdt_next_node’:
scripts/dtc/pylibfdt/libfdt_wrap.c:5581:17: error: too few arguments to function ‘SWIG_Python_AppendOutput’
5581 | resultobj = SWIG_Python_AppendOutput(resultobj, val);
| ^~~~~~~~~~~~~~~~~~~~~~~~
```
This is the same fix as applied in 363e07d.
Fixes: #20619
Link: #20620
Signed-off-by: Trix Taiclet <trix@c3l.lu>
Link: https://github.com/openwrt/openwrt/pull/20620
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
