mirror/u-boot-2016
1
0
Fork 0
mirror of https://git.codelinaro.org/clo/qsdk/oss/boot/u-boot-2016.git synced 2025-12-10 07:44:53 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
u-boot-2016/arch/arm
History
Exact
Ram Kumar D dd66e02271 arch: arm: dts: ipq5332: configure SFP RX pin state 
We used to configure SFP RX pin with 8MA drive strenght and pull
up enabled, but later identified that, it is not really required.
Then, removed it in miami.

But, looks likes when device like SFP-80M module is connected to
SFP cage, these configurations are needed. So, enabling it on
all miami sfp rdps.

This change wont affect our SFP-30M module behaviour.

Change-Id: I5dd758e1d982062d9a0259b50e1e537eeda8ddc8
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
(cherry picked from commit b66a91afdd)
2023-10-17 23:16:26 -07:00
..
cpu armv7: qca: common: smem: skip printing the partition info if it exceeds flash size 2023-08-16 04:50:56 -07:00
dts arch: arm: dts: ipq5332: configure SFP RX pin state 2023-10-17 23:16:26 -07:00
imx-common imx_common: check for Serial Downloader in spl_boot_device 2016-01-03 15:57:56 +01:00
include board: qca: arm: remove MEM_NOC clock access 2023-09-08 05:25:36 -07:00
lib ipq: Remove runtime failsafe feature 2022-11-15 22:20:47 -08:00
mach-at91 arm: at91/spl: atmel_sfr: move saic redirect to separate file 2015-11-30 22:27:55 +01:00
mach-bcm283x rpi: get rid of BCM2835_BOARD_REV_* macros 2015-12-05 18:22:35 -05:00
mach-davinci arm: Remove da830evm board 2015-09-28 10:48:23 -04:00
mach-exynos arm: exynos: clean up checkpatch issues 2015-11-02 10:38:22 +09:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-integrator integrator: switch to DM serial port 2015-08-12 20:47:49 -04:00
mach-keystone ARM: k2g: add SD card and eMMC support 2015-10-22 14:22:25 -04:00
mach-kirkwood arm: kirkwood: add ZyXEL NSA310S device 2015-11-29 22:16:14 +01:00
mach-mvebu arm: mvebu: Configure ARP timeout and retry count 2015-11-29 16:02:44 +01:00
mach-orion5x arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
mach-rockchip rockchip: Add basic support for kylin board 2015-12-13 20:51:50 -07:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-socfpga arm: socfpga: Unreset NAND in U-Boot 2015-12-22 21:30:02 +01:00
mach-tegra dm: tegra: Provide serial platform data for SPL 2015-12-05 18:22:38 -05:00
mach-uniphier ARM: uniphier: set DTB file name to fdt_file environment 2015-12-23 00:08:56 +09:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq ARM: zynq: Add default ps7_init_gpl.c/h for ZYBO 2015-12-18 13:15:57 +01:00
mvebu-common arm: mvebu: Move mvebu-common into mach-mvebu 2015-05-05 14:28:29 +02:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk Revert "u-boot: Remove soft-float compile flag" 2020-05-26 13:52:29 +05:30
Kconfig ipq5332: replace soc name from devsoc to ipq5332 in all file contents 2022-10-12 22:31:53 -07:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00