This change modifies kstrtoint function to update
the result in destination buffer and return zero on success.
Change-Id: Ibdd9b36eed39d5e2ee3afc6f1609c1e35d5fb464
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
Nodeoff must be initialized to ensure root node is present.
Change-Id: I1091a816f5b92c3f798222da9c987d899ef4bc9f
Signed-off-by: Sanjeev N <nsanjeev@codeaurora.org>
power-on write protection also gets cleared during sd-ldo toggle in kernel.
This toggle is required only for SD card. So, If the boot flash type is
eMMC or NOR+eMMC sd-ldo removed from the device tree.
Change-Id: I3c7bf14a5f67df3bcef2bd6507da5146c2beffb7
Signed-off-by: Vinoth Gnanasekaran <vgnana@codeaurora.org>
Some cards are not working due to pcie reset.
So doing pcie reset with pcie reset gpio.
Change-Id: I0c631b116923b90bf94223d09e5662900a31244e
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Since set_sgmii_mode function does not return any value, changed its
functon type to void.
Change-Id: I4f098747ed2e562488cf97dc06dbb48a54b53fc3
Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
The "flash" command erases given partition and
writes the image to flash.
Change-Id: I059414fd3d7eefeac0c626e1980a70985f2de986
Signed-off-by: Pavithra Palanisamy <pavip@codeaurora.org>
We set 'fdt_high' inside 'bootipq' command.
While booting initramfs image using bootm,
fdt_high is not set causing fdt being loaded
at some random address that could be reserved
from kernel causing boot failure.
Change-Id: I769367dda8cbdf1b1b95233af52780f6d674f50f
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Currently, we search for "sdhci" node and continue with
mmc_init if it is present. We never check for status of
the sdhci node. As sdhci node is present in all the
board variants, mmc_init happens in all boards.
So, added a check to see if the status of sdhci node is
"okay" and continue with initialization, else return.
fdtdec_get_is_enabled library function checks only for
string "okay" which is the correct usage for status
variable. So, changed the status string in the
dts files accordingly.
Change-Id: I26ac5d9930b9e91e3d9d2436eff0cf02b8977b2e
Signed-off-by: Balaji Jagadeesan <bjagadee@codeaurora.org>
Call board_flash_protect only if the primary/secondary boot
type of the board is mmc.
Change-Id: Ib6f1251a7435a08d647909202c6570c383a64311
Signed-off-by: Balaji Jagadeesan <bjagadee@codeaurora.org>
In DK06, there is no h/w support for mmc and sd.
In DK07, there is no h/w support for mmc and no support
for sd in uboot.
So, removing the sdhci entries from dts.
Change-Id: I39ac2fa56745d1ee3c23be5d8acd3ce5c355a135
Signed-off-by: Balaji Jagadeesan <bjagadee@codeaurora.org>
Extended SoC major and minor version fixup
to kernel device-tree on IPQ8064 and IPQ4019.
Also includes cpu_type fixup for IPQ4019.
Find two new entries in the root-node:
soc_version_major, soc_version_minor
Change-Id: I99210aefdc578890b62779d253764b82fe47c543
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
-Device IO commands are not supported
-CPU down is supported by waiting in loop
-Need reboot to execute bootipq command
Change-Id: Id10eef0c8e5feb636716461c58ba1640dfe46658
Signed-off-by: Santan Kumar <santank@codeaurora.org>
TX and RX descriptors are 16 bytes. This causes problems with the cache
maintenance on CPUs where the cache-line size exceeds the size of these
descriptors. What will happen is that when the driver receives a packet
it will be immediately requeued for the hardware to reuse. The CPU will
therefore need to flush the cache-line containing the descriptor, which
will cause all other descriptors in the same cache-line to be flushed
along with it. If one of those descriptors had been written to by the
device those changes (and the associated packet) will be lost.
To work around this, we make use of non-cached memory if available. If
descriptors are mapped uncached there's no need to manually flush them
or invalidate them.
Change-Id: I7b8a9a55226dfdcbab49a93bcdf43af4d70c108a
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
UBIFS has add_node function and FDT dynamic patch has
add_node global variable which generates link error.
Change-Id: I5e1350c6280a0ecb0906743fc93563cf5b106d42
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
This change enables u-boot support for AP.DK07.1-C4 configuration.
AP.DK07.1-C4 enables QCA402x IOT support
Change-Id: I5982b8f8783755b03d11c878f8108d71e6ace6d1
Signed-off-by: Gitanjali Krishna <gitanjal@codeaurora.org>
