Added read & write bam pipe entires in all the ipq specific dtsi.
Also, updated the spi bam code with generic code changes to enable
the multiple spi support on all ipq chipsets.
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Signed-off-by: Ram Kumar D <ramd@codeaurora.org>
Change-Id: Ibcdb9d2a9ff7a25f3d296ecdb1aca403511e07d7
The crashdump memory allocation in kernel context save driver is
updated for ipq9574 as below. Due to this, TLV offset is changed to 500K.
1. TMEL ctxt - 300K
2. regsave - 80K
3. DCC - 3K
4. Unused - 117K
5. TLV Buffer - 12K
Change-Id: I25cdce6be90ce2d2b7ab6b6c01976d5a061074e9
Signed-off-by: Kavin A <kavia@codeaurora.org>
In this case, the variable sram_end(Base + Size)
will hold (0x40000000 + 0xC0000000) and will overflow
32bits. Update the variable type to u64.
Change-Id: Iadf008c0ace552b793b9424e5c9ded0873599a64
Signed-off-by: anusha <anusharao@codeaurora.org>
We are typecasting the fdt_start and other parameters
to unit64_t. So ULONG_MAX should be used for the boundary
check.
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: I42b4c0cb05902410c4e18553017c016bdd312207
Include SCM call to inform TZ whether HLOS boots from
primary or secondary partition
Change-Id: Ib1fa2b3c12762d1deed5b99f025c83870c142fa6
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Updated the source from gpll0_out_aux to gpll0_out_main
Change-Id: Iecaefbe03c02286823d1a67ea53b180bfd8d948e
Signed-off-by: anusha <anusharao@codeaurora.org>
added integer overflow checks to avoid buffer over reads/write
while using the fdt header fields.
CRs-fixed: 705078.
Change-Id: I062ee9e0610eeeeea32dd95695b18aa9dbca06ea
This patch adds the phy type and phy address also as part
of the print message during error cases which will help in
quickly identifying the port configuration.
Change-Id: I6762998e8bae8be8473d32e41b81ecc7e0b94885
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Only i2c aliases will be populated as needed in respective
RDP DTS. All i2c nodes will be added in common SOC DTS.
Change-Id: I540425c63339f45990231dca84cab6e66af009fb
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Only 2 PCIE's must be enabled by default in AL02.
Change-Id: I6ef06daca92e83df065bb4ca80d77e79b13834e5
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This changes add SKU validation support in PCI driver
the valdiation api given as weak for non SKU supported platform.
Change-Id: I32985be1e06e9cb07d28edfba50299bb7eaa3cc5
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
This change allign pci id with design.
This changes remove the manual id variable and use
alias id number instead.
Change-Id: I7ba481ee6e05b58a8481ccd89c6d40c4b3928e76
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
IMEM is not needed in U-Boot. This patch removes the
IMEM Clock config.
Change-Id: I76c20b4d1fb83be958ff98edd9935aa234e6a67a
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
In ipq9574, switch_mac_mode0 is used for Uniphy0 and
this patch updates the same for db-al02 RDP.
Change-Id: I23080d70f9462bf857e083d6f54a97e8ce20d341
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
In c3 config, we will be making the following changes:
DB-AL01-c3:
Removing 1x2.5G port & adding 1x10G in USXGMII1 with rework
DB-AL02-c3:
Removing 1x2.5G port & adding 1xSFP+ in USXGMII0 with Rework
Note that other features are same as c1 in c3 config and
Ethernet port changes will be done on top of this.
Change-Id: I4ccfcf196e923a815deea377879cdc3e782d4673
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
These properties are not used in UBoot and this patch
removes the same.
Change-Id: I949f207d5b772755e6ab818270cd6c401e8e8f8a
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
