This patch adds support for sbl partition layout switch on IPQ9574
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
(cherry picked from commit aa841af6f70823ec782b6efb0ba459f58068f9c6)
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Change-Id: Idd950aef614a225c9cb6afd456967f53da6e4993
qpic_nand sbl -> to switch to 2K layout
qpic_nand linux -> to switch back to 4K layout
Currently this switch is enabled for IPQ9574
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
(cherry picked from commit c9a1c10b2e35ba8f14dafc1f4c07aa5a07a01541)
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Change-Id: I3e429b8cd5e600b4214c01d7949c01536f988e47
The crashdump memory allocation in kernel context save driver is
updated for ipq9574 as below. Due to this, TLV offset is changed to 500K.
1. TMEL ctxt - 300K
2. regsave - 80K
3. DCC - 3K
4. Unused - 117K
5. TLV Buffer - 12K
Change-Id: I25cdce6be90ce2d2b7ab6b6c01976d5a061074e9
Signed-off-by: Kavin A <kavia@codeaurora.org>
In this case, the variable sram_end(Base + Size)
will hold (0x40000000 + 0xC0000000) and will overflow
32bits. Update the variable type to u64.
Change-Id: Iadf008c0ace552b793b9424e5c9ded0873599a64
Signed-off-by: anusha <anusharao@codeaurora.org>
We are typecasting the fdt_start and other parameters
to unit64_t. So ULONG_MAX should be used for the boundary
check.
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Change-Id: I42b4c0cb05902410c4e18553017c016bdd312207
Include SCM call to inform TZ whether HLOS boots from
primary or secondary partition
Change-Id: Ib1fa2b3c12762d1deed5b99f025c83870c142fa6
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Updated the source from gpll0_out_aux to gpll0_out_main
Change-Id: Iecaefbe03c02286823d1a67ea53b180bfd8d948e
Signed-off-by: anusha <anusharao@codeaurora.org>
added integer overflow checks to avoid buffer over reads/write
while using the fdt header fields.
CRs-fixed: 705078.
Change-Id: I062ee9e0610eeeeea32dd95695b18aa9dbca06ea
This patch adds the phy type and phy address also as part
of the print message during error cases which will help in
quickly identifying the port configuration.
Change-Id: I6762998e8bae8be8473d32e41b81ecc7e0b94885
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Only i2c aliases will be populated as needed in respective
RDP DTS. All i2c nodes will be added in common SOC DTS.
Change-Id: I540425c63339f45990231dca84cab6e66af009fb
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Only 2 PCIE's must be enabled by default in AL02.
Change-Id: I6ef06daca92e83df065bb4ca80d77e79b13834e5
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This changes add SKU validation support in PCI driver
the valdiation api given as weak for non SKU supported platform.
Change-Id: I32985be1e06e9cb07d28edfba50299bb7eaa3cc5
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
This change allign pci id with design.
This changes remove the manual id variable and use
alias id number instead.
Change-Id: I7ba481ee6e05b58a8481ccd89c6d40c4b3928e76
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
IMEM is not needed in U-Boot. This patch removes the
IMEM Clock config.
Change-Id: I76c20b4d1fb83be958ff98edd9935aa234e6a67a
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
In ipq9574, switch_mac_mode0 is used for Uniphy0 and
this patch updates the same for db-al02 RDP.
Change-Id: I23080d70f9462bf857e083d6f54a97e8ce20d341
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
In c3 config, we will be making the following changes:
DB-AL01-c3:
Removing 1x2.5G port & adding 1x10G in USXGMII1 with rework
DB-AL02-c3:
Removing 1x2.5G port & adding 1xSFP+ in USXGMII0 with Rework
Note that other features are same as c1 in c3 config and
Ethernet port changes will be done on top of this.
Change-Id: I4ccfcf196e923a815deea377879cdc3e782d4673
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
These properties are not used in UBoot and this patch
removes the same.
Change-Id: I949f207d5b772755e6ab818270cd6c401e8e8f8a
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
