This patch add supports to boot linux 6.1 images on
IPQ5332 & IPQ9574 DB boards.
Change-Id: Ifd9fb1b74c248ffc625c7c49fc96dd7d16a8670f
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
Update SDX reset GPIO to restart SDX during different SSR scenarios.
Change-Id: I8ecda7f08bbb00498736925efb6bc0f834da48a8
Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com>
This patch appends the rdp474 name of ap-mi01.9 in config
Change-Id: If97ced31402d4f7bb84fb27f7eb4d53e4f4edfd7
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
Reuse DB-MI02.1 for 256M DDR and single QCN64xx radio configuration
Change-Id: Ia08a7705e5254b59cb8f15f5bcba41497fc3eb94
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This RDP is based on AL02-C4, with changes in ethernet for GPON enablement
Change-Id: Ic25d9009e685d8646564bda582305fbf1bce2be6
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
Add support to read the TME-l OEM fuse parameters from
qfprom address
Change-Id: Ia4f0766a68b67fccc59a09883dd7ef11bc970eef
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
The AP-MI01.9 is similar to AP-MI01.2 with internal
radio disabled and pcie0 for WKK 5G and pcie1 for WKK 2G
Change-Id: I568c4da0c7604881395dad08be42201fdf9c746b
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
In AP-MI01.3 RDP, PCIe0 and PCIe1 are enabled in single
lane configuration
Change-Id: I5592d50ebb425a92ad536142573d09cdd60206b2
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch updates the PCIe1 lane configuration for DB-MI01.1
and DB-MI02.1
Change-Id: I3dc15a3255d74fcbd5147b2fa6f89c184e48410b
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch updates the AP-MI04.1 PCIe configuration from
PCIe0 and PCIe1 to PCIe1 and PCIe2
Change-Id: If4aa155cc1005becd050fbc36d91d3764005c4c4
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch adds the ethernet support for AP-MI01.3 and
removes pci nodes from dts
Change-Id: I3fcb338a061d732b44409aa835a1fde45508be95
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch adds the support for AP-MI01.6-QCN9160 RDP by reusing
the ipq5332-mi01.6.dts for better readabilty
Change-Id: I2776222fd80637f0111dc9074491f351cfb932b3
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch adds a condition to power cycle the
SDX based on the current status of the e911 call.
Change-Id: Id3cf50cfb49a26151c98b7d52e18b9c487cfb935
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
This patch removes the pcie2 and usb 3.0 support in AP-MI01.2-QCN9160
Change-Id: I1c2a6c9d27f1d2c75d3be505076626396d4c9d37
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This change set SGMII mode and force mode based on
dts entries.
Change-Id: Ideaa1bb77fe8fb37a7e6b907a987f6dcac54917f
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
This changes enable both PHY and switch configure
simultaneously and also switch can be configure
to any port.
And also these changes enable dual MDIO bus support.
Change-Id: Ib86c8a15abb9a7a35aa86d87cef78ad917dd1a00
Signed-off-by: Vandhiadevan Karunamoorthy <quic_vkarunam@quicinc.com>
AL02-C17 is based on AL02-C4. This variant
enables PCie0 and PCie2.
Change-Id: I67aa500bd13ec661a43b17c4cbcd56c9a6db8abc
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This patch adds support to power cycle the SDX device during
the IPQ crash scenario by toggling the full_power_on and reset
gpios.
Change-Id: Ifac2db5480c13456ef50b6d779691c5bf41f21b2
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Add skip_pci_mask environment variable to skip pci enumeration
based on the bitmask. Also, removing the pci3 dts entry from
the RDP437 & RDP461 to skip pci3 enumeration.
Example - setenv skip_pci_mask 0xc
The above command will skip pci enumeration of bus 2 & 3.
Change-Id: Iff50acca07ffc026bed84a0d2372e6de0a3ba3a9
Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
After mibib reload kernel and rootfs info have to be reloaded using
get_kernel_fs_part_details function otherwise partitions
will be marked as bad offset
Change-Id: I9a0ec847b65ff10ec7b54b65929efd034a25d278
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
With this change, Add option to support
prefixing crash dump files with timestamp prefix
Change-Id: I30343e6d7dc58376264dd34a4a3cd25bb34e65c6
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
