u-boot-2016/drivers
Md Sadre Alam 2c13362d84 ipq5018: Enable support for serial nand in qpic
This change will add support for serial nand.

QPIC-2.1.1 supports parallel nand as well as serial nand.

QPIC will operate either in parallel configuration or
serial nand. Both can't work together.

This change will support initially four serial nand parts.

MT29F1G01ABBFDWB-IT (Micron-0x2C,0x15, 2K + 128)

GD5F1GQ4RE9IG (Giga Device-0xC8,0xC1, 2K + 128)

GD5F2GQ5REYIH (Giga Device-0xC8,0x22, 2K + 64)

GD5F1GQ4RE9IH (Giga Device-0xC8, 0xC9, 2K + 64)

Device Internal ECC is disabled for all three devices. This change will
enabele QPIC ECC engine.

For MT29F1G01ABBFDWB-IT 4-bit ECC as well 8-bit ECC will be supported.

For  GD5F1GQ4RE9IG 4-bit ECC as well 8-bit ECC will be supported.

For GD5F2GQ5REYIH only 4-bit ECC will be supported due to 64-bytes spare.

For GD5F1GQ4RE9IH only 4-bit ECC will be supported due to 64-bytes spare.

Change-Id: I3f38f9c76b7bb235bb335a481fbc42ae1bd00395
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
2019-12-23 11:54:23 +05:30
..
adc sandbox: add ADC driver 2015-11-02 10:38:00 +09:00
bios_emulator Various Makefiles: Add SPDX-License-Identifier tags 2015-11-10 09:19:52 -05:00
block Fix typo: firstly -> first. 2015-12-05 18:22:23 -05:00
bootcount bootcount: Correct #endif comment to match, other aesthetics 2016-01-08 10:15:43 -05:00
clk drivers: clk: ipq40xx: Clear divider value while doing deinit 2018-11-20 15:25:22 +05:30
core dm: core: Fix Kconfig text to mention SPL in SPL_OF_TRANSLATE 2015-12-10 20:41:56 -07:00
cpu x86: Move MP initialization codes into a common place 2015-07-14 18:03:16 -06:00
crypto drivers/crypto/fsl: fix endianness issue in RNG 2015-12-15 08:57:35 +08:00
ddr move erratum a008336 and a008514 to soc specific file 2015-12-15 08:57:32 +08:00
demo drivers: hierarchize drivers Kconfig menu 2015-08-12 20:47:44 -04:00
dfu dfu: dfu_sf: Pass duplicate devstr to parse_dev 2015-11-03 17:29:33 +01:00
dma Merge "ipq40xx: Add maximum timeout for BAM interrupt" 2018-02-27 23:40:21 -08:00
fpga Move console definitions into a new console.h file 2015-11-19 20:27:50 -07:00
gpio qca: ipq5018: Adding support for IPQ5018 2019-10-10 21:55:42 +05:30
hwmon Fix bad return value checks (detected with Coccinelle) 2015-10-24 13:50:30 -04:00
i2c ipq807x: Fix compiler warnings in u-boot 2019-01-22 12:57:57 +05:30
input Move console definitions into a new console.h file 2015-11-19 20:27:50 -07:00
led dm: led: Tidy up SPL options for the led and led-gpio 2015-09-02 21:28:22 -06:00
memory Various Makefiles: Add SPDX-License-Identifier tags 2015-11-10 09:19:52 -05:00
misc Move console definitions into a new console.h file 2015-11-19 20:27:50 -07:00
mmc ipq5018: Enable eMMC support. 2019-11-21 19:58:18 +05:30
mtd ipq5018: Enable support for serial nand in qpic 2019-12-23 11:54:23 +05:30
net Revert "drivers: net: ipq6018: Remove 8033 port support" 2019-08-23 14:50:10 +05:30
pci ipq6018: pcie: Update phy configuration 2019-10-30 12:09:56 +05:30
pcmcia powerpc: mpc824x: remove MPC824X cpu support 2015-01-05 12:08:55 -05:00
pinctrl rockchip: rk3036: Add pinctrl driver 2015-12-01 08:07:22 -07:00
power sunxi: power: axp818: add support for axp818 driver 2015-12-10 11:14:22 +01:00
pwm pwm: imx: Remove unreachable code 2015-05-26 14:13:12 +02:00
qe driver/qe: use strncpy instead of strcpy 2015-08-03 12:06:36 -07:00
ram ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM 2015-08-18 13:46:02 -04:00
remoteproc drivers: remoteproc: rproc-uclass: Fix check for NULL pointers 2015-12-05 18:22:32 -05:00
rtc rtc: Add MCP79411 support to DS1307 rtc driver 2015-11-04 15:19:12 -08:00
serial qca: ipq5018: Adding support for IPQ5018 2019-10-10 21:55:42 +05:30
soc Various Makefiles: Add SPDX-License-Identifier tags 2015-11-10 09:19:52 -05:00
sound of: clean up OF_CONTROL ifdef conditionals 2015-08-18 13:46:05 -04:00
spi ipq5018: Add spi nor support 2019-10-17 23:08:48 +05:30
thermal imx: mx7: fix the temperature checking for Rev1.1 2016-01-07 17:53:11 +01:00
timer x86: Move i8254_init() to x86_cpu_init_f() 2015-12-09 17:44:44 +08:00
tpm dm: tpm: Drop CONFIG_DM_TPM 2015-10-23 09:42:28 -06:00
twserial drivers: convert makefiles to Kbuild style 2013-10-31 13:26:01 -04:00
usb usb: xhci: Program 'route string' in the input slot context 2018-06-05 15:40:00 +05:30
video Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-12-04 08:21:28 -05:00
watchdog imx_watchdog: always set minimal timeout in reset_cpu 2016-01-07 17:54:53 +01:00
Kconfig dm: adc: add simple ADC uclass implementation 2015-11-02 10:38:00 +09:00
Makefile Fix compilation errors in clk driver 2016-09-29 21:03:49 +05:30