This RDP is based on AL02-C4, with changes in ethernet for GPON enablement
Change-Id: Ic25d9009e685d8646564bda582305fbf1bce2be6
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
Add support to read the TME-l OEM fuse parameters from
qfprom address
Change-Id: Ia4f0766a68b67fccc59a09883dd7ef11bc970eef
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Adding a new command 'flupdate' to change the flash type
to mmc/nand/nor. flupdate set will set the flash type to
the provided type. flupdate clear will reset the flash
type to default.
Command usage:
flupdate set mmc/nand/nor
flupdate clear
Change-Id: Ib328cc1fea0b37f27e6479d55fce08365fbfcf69
Signed-off-by: Hariharan K <quic_harihk@quicinc.com>
The AP-MI01.9 is similar to AP-MI01.2 with internal
radio disabled and pcie0 for WKK 5G and pcie1 for WKK 2G
Change-Id: I568c4da0c7604881395dad08be42201fdf9c746b
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
The pcie0 and usb uses combo phy, for usb 3.0 GCC_PCIE3X1_PHY_AHB_CBCR
clock has to be enabled
Change-Id: I281773f40bf7d32b27a27e7dc5e5d531ae3a3dc0
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch increases the CDR bandwidth to pass the
USB 3.0 Rx jitter tolerance test
Change-Id: Id58b71f4078ea5d60ab0b0d7bf93aa0a5d519e3c
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This change will add support for giga device
GD5F2GM7REYIG spi nand support.
Change-Id: I97772e0a8210bd5a6d41e10bbfbdd75b44e53108
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
In AP-MI01.3 RDP, PCIe0 and PCIe1 are enabled in single
lane configuration
Change-Id: I5592d50ebb425a92ad536142573d09cdd60206b2
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
In AP-MI01.3 RDP, PCIe0 and PCIe1 are enabled in single
lane configuration
Change-Id: I5592d50ebb425a92ad536142573d09cdd60206b2
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
Adding a new command 'flupdate' to change the flash type
to mmc/nand/nor. flupdate set will set the flash type to
the provided type. flupdate clear will reset the flash
type to default.
Command usage:
flupdate set mmc/nand/nor
flupdate clear
Change-Id: Ib328cc1fea0b37f27e6479d55fce08365fbfcf69
Signed-off-by: Hariharan K <quic_harihk@quicinc.com>
If flash image type is emmc, switch the flash
type to emmc from nor in norplusemmc board using
the flupdate commands. Once the image is flashed
switch back the flash type to nor using the same
flupdate commands.
This change is to support the below Change-Id
Ib328cc1fea0b37f27e6479d55fce08365fbfcf69
Change-Id: Ia5f75923d7bdfd313a986826f1ac2f7f571c414a
Signed-off-by: Hariharan K <quic_harihk@quicinc.com>
update the port clock setting for qca8084 PHY with respect to
10M speed configuration.
Change-Id: I16403b155f31f37a6bdf828150ca2d0923a29f3e
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
update the port clock setting for qca8084 PHY with respect to
10M speed configuration.
Change-Id: I16403b155f31f37a6bdf828150ca2d0923a29f3e
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
When we use root certificate count as four, then metadata
is generated with size as 0x4000, but for single root
certificate, metadata size will be less than 0x4000, hence
consider minimum metadata size as 0x1000
Change-Id: Ib713e5fd4bcfe493cf482efda54d20ca1604939b
Signed-off-by: Ram Chandra Jangir <quic_rjangir@quicinc.com>
This change checks if 0:CDT_1 partition exists and then flashes cdt.bin.
Previously, check existed only for 0:CDT. The change allows for creation
of single image with proper cdt_1 name and appends it to the single image.
With this, we can successfully use the CDT_1 alternate partition for images.
Change-Id: I100dc789b54805c699ba6f30d5cb1b74734b1bd9
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
This patch updates the PCIe1 lane configuration for DB-MI01.1
and DB-MI02.1
Change-Id: I3dc15a3255d74fcbd5147b2fa6f89c184e48410b
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This change checks if 0:CDT_1 partition exists and then flashes cdt.bin.
Previously, check existed only for 0:CDT. The change allows for creation
of single image with proper cdt_1 name and appends it to the single image.
With this, we can successfully use the CDT_1 alternate partition for images.
Change-Id: I100dc789b54805c699ba6f30d5cb1b74734b1bd9
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
