This patch updates the default uniphy mode to SGMII
for the qca808x ports. If suppose, the phy is capable
of supporting 2.5G, then it will reconfigure the
uniphy mode to SGMII_PLUS at that time based on the
link speed detected.
Change-Id: I56692b19536e71cbcf3a4c31d32ecb29866c5fdc
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
1. Modified ipq5018-mp02.1.dts and added NAND alias and description
Change-Id: I6043168712b2b8e54780fe44ca2e00d29f90374a
Signed-off-by: Ignatius Michael (Jihan) Jihan <quic_mignatiu@quicinc.com>
Added read & write bam pipe entires in all the ipq specific dtsi.
Also, updated the spi bam code with generic code changes to enable
the multiple spi support on all ipq chipsets.
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Signed-off-by: Ram Kumar D <ramd@codeaurora.org>
Change-Id: Ibcdb9d2a9ff7a25f3d296ecdb1aca403511e07d7
The main differece on AL02-C4 are,
PCIE1: 2G WKK
PCIE2: 6G WKK
PCIE3: 5G WKK
Other features are same as AL02-C1.
Change-Id: Ie13154dacf247c99e15f1da775238012075740ee
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
The main differece on AL02-C3 are,
PCIE0: 1x5G
PCIE2: 1x6G
PCIE3: SDX
Other features are same as AL02-C2
Change-Id: If40e554baf16af1654bef3314f017f93d2babfbb
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Only i2c aliases will be populated as needed in respective
RDP DTS. All i2c nodes will be added in common SOC DTS.
Change-Id: I540425c63339f45990231dca84cab6e66af009fb
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Only 2 PCIE's must be enabled by default in AL02.
Change-Id: I6ef06daca92e83df065bb4ca80d77e79b13834e5
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This change allign pci id with design.
This changes remove the manual id variable and use
alias id number instead.
Change-Id: I7ba481ee6e05b58a8481ccd89c6d40c4b3928e76
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
In ipq9574, switch_mac_mode0 is used for Uniphy0 and
this patch updates the same for db-al02 RDP.
Change-Id: I23080d70f9462bf857e083d6f54a97e8ce20d341
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
In c3 config, we will be making the following changes:
DB-AL01-c3:
Removing 1x2.5G port & adding 1x10G in USXGMII1 with rework
DB-AL02-c3:
Removing 1x2.5G port & adding 1xSFP+ in USXGMII0 with Rework
Note that other features are same as c1 in c3 config and
Ethernet port changes will be done on top of this.
Change-Id: I4ccfcf196e923a815deea377879cdc3e782d4673
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
These properties are not used in UBoot and this patch
removes the same.
Change-Id: I949f207d5b772755e6ab818270cd6c401e8e8f8a
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
DB-AL02 variants by default has support for 4x1G, 1x2.5G and
1x10G ethernet ports.
Change-Id: Ic3821acce4f743582292dc9655da8d238c3f6709
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
The main features of DB-AL02-C1 are as below:
Flash: SPI NOR, QSPI NAND
RAM: DDR4
PCIe: M.2 SSD
Ethernet: 1x10G, 1x2.5G, 5x1G
USB: 1xUSB3
PMIC: I2C based MPS
Only change in DB-AL02-C2 is that it can support:
Flash: eMMC with rework
Other features are same as DB-AL02-C1
Change-Id: Ia52dffb1ecd832d89bbe183bd8d32bf2d0351d90
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
By default DB-AL01 supports 4 Malibu, 1 AQ and 1 Napa.
This patch updates the nodes accordingly to support this
default configuration.
Change-Id: I4fbf97ed65e1f38d0bb50a5e82746bf2d807fa66
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This change also remove emulation dts since
build issue due to i2c duplicate
Change-Id: I28e0ffa1dd275c6ba416ded91756589ffe886631
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
This patch updates the following:
1) Removes unused/duplicate macro: NSS_CC_PORT1_RX_CBCR_ADDR
2) Remove CMN_BLK_INIT
3) Update MAX Ports to 6
4) Rename switch_mac_mode to switch_mac_mode0 in DTS and driver
5) Fix SYSNOC frequency configuration
6) Tx/Rx descs is initialized to 0 before use which is
needed because Alder DDR is not init to 0 by default.
Change-Id: Ide22e146f9c8ecb75585d0a8d04e426c463ad8c9
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch updates the QCA PHY names and its references
accordingly.
Change-Id: I5d301fcecc49793387a50487bf2e713a5a9288e8
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This patch adds a boolean in DT, so that configurations
can be done accordingly in network driver in case the
RDP supports 2 AQ Ports.
Change-Id: I6eb070ad0d281e3bac0b111f0659e67168296456
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
The ethernet node is already included from the file
ipq9574-db-al01-c1.dts. Remove redundant ethernet node
config from this c2 file.
Change-Id: I1046f04c67c1a67c614708cd6575dd436154ad83
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
This changes add pci 2 lane support in pci driver
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia4235c277e91d68366f6ae8aa16d8505a2ca5b05
