Support for ESS switch node in uboot device tree
for HK07.
Change-Id: I4f5e53a713cc8c257bbc5694c434a28625720062
Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
Adding device tree support for HK07 in u-boot-2016.
Change-Id: Ib1ea4ffe1df241d2c2cbd3fac4fff3f157eae077
Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
In case of 11ad dock (AK01), 8033 phy needs to be reset,
before switch initialization. GPIO32 is configured to
reset phy.
Change-Id: I18a7f05b57c9a02adb27d58d8b4098d44edb49bd
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
This patch is to support DK01-C3 dts which is required
for standard profile in linux 4.4 kernel.Linux 3.14 kernel
does not have DK01-C3, hence it uses DK01-C1 config.
Change-Id: I4afa8c4511e55f093b573cf42e04b0917ce7d0b4
Signed-off-by: Sasirekaa Madhesu <smadhesu@codeaurora.org>
1. Added pci entries in AP160 and AP160_2xx dts
2. The wifi pcie card requires to be powered on from GPIO
pins. This patch also adds the same in AP160 dts file and
enable it during PCIe configuration.
Change-Id: Icd8f5741d5df38d46640c78a7475853e77b873a9
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Updated the drive strength and pull up values for
the emmc pins.
Reference commit id:185a9ad97acb1d0ee18b9af45a17e1d183af2674
Change-Id: I1e38a51eb1a4c1701866c1f45c8189eea9cd1337
Signed-off-by: Sasirekaa Madhesu <smadhesu@codeaurora.org>
Previous pending L2 cache errors are cleared during the
cleanup phase before transferring the control to linux.
Change-Id: I3a54c64049135e150c2b49b0d6de1667511b6a14
If the dump_to_flash environment variable is set with the proper
offset in u-boot, crashdump data will be stored to flash memory.
Otherwise it will be stored in tftp server.
Change-Id: I10ac1016e3dfe6a2fa11a0a67c5774b29c3df67a
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Made the necessary changes to retrieve the boot version through
SMEM call and append the same to device tree.
Change-Id: I627b108935995212520794d12d6f9af64641a96f
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Made the necessary changes to retrieve the tz version through
SCM call and append the same to device tree.
Change-Id: I890f82a4ec03bb9c24eccce09fdeba9d948e1c71
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
This patch adds support to DK06_1_C1 board.
Change-Id: Ib4fcbdfe7e2e0ce08d5aa08aad4dc168c83a3583
Signed-off-by: Sasirekaa Madhesu <smadhesu@codeaurora.org>
This patch adds support to DK01_1_S1 board.
Change-Id: I4a97f809766513da05f167b48923986c0860384e
Signed-off-by: Sasirekaa Madhesu <smadhesu@codeaurora.org>
Registering SPI nor flash as mtd device was based
on 'spi_gpio' entry in dts, whereas it will be done
based on 'spi_nor_available' in this patch as spi_gpio
entry is not required in some of the SPI nor
supported boards.
This patch also enables the spi nand support
in DK04-c5 board.
Change-Id: I2d70a6c108321d0f504daab7bc4e74739499582a
If crashdump magic is found, should not allow user
to access u-boot prompt as tz will be in unsecure state.
Change-Id: Icdc94c33fb87664857bafa981950f9768794cf11
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
This patch fixes the issues in below i2c commands.
i2c probe , i2c md and i2c mw commands.
Change-Id: I3dd99e8846452b20a71b0664d325b309f3564579
Signed-off-by: Antony Arun T <antothom@codeaurora.org>
This patch enables SPI-NAND support for DK and making
chip select gpio configurable from DTS.
Change-Id: I2ca7d3021fa27da1d83e2a787a1dc626919124f8
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
ipq806x has different alignment of smem_ram_ptable structure when
compared to ipq40xx / ipq807x, which leads to fetching of wrong
information.
This patch addresses the issue by moving the above structure to
board specific.
Change-Id: If7bf2fc54243fc38d1b0a5c9e6f6ba6f9641c700
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Adding support for DK04-C2,C3,C4,C5 and
DK07-C1,C2,C3 boards.
Change-Id: I2727645086328331deffd63849bedbf119d163c8
Signed-off-by: Sasirekaa Madhesu <smadhesu@codeaurora.org>
Enabling spi dma driver for ipq40xx. This patch
also enables rx and tx pipe configurable from dts.
Change-Id: Id6009f6e9863ab2cdf8b105461d62aa68e3d004b
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Added check for dcache status before flushing.
Change-Id: I69462aa7852f96611e663acdf43aecd005a50c38
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
