This changes add 8033 phy support in MP02.1(Ap & Db) RDP
in tiny nor flash
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ib35faba4321c70fed007c923ff0f5e618fad0276
This changes remove the phy_name from all mpXX dts and
handle by driver itself.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia2d0379151db0c68a0b28f5062e83f80579d37c1
This changes removes NAPA support from tiny U-boot config
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I057064d63a3ac0788275a4572242cc251a445a98
This changes add mp03.1(Ap & Db) support in tiny u-boot
for 16MB profile
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: If27bcb8f760c2e648b70811576fc62c4a44f249b
This change will enable config for serial training.
This change also fix the the logic to get most appropriate phase
out of passed phase.
This change also add support to read serial training offset from
partition table. Also patching freqency value & phase value to kernel.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: Ibb4a5cd80f16605e8e91bdf6a0c6c484edff1735
Removed identical device-tree to reuse original dts.
Affected boards: AC02 and OAK03
OAK03 to reuse HK01 dts and AC02 to reuse AC01 dts
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Change-Id: I5a70514370f394b15e68d5819cf8d1b52da14f3f
This change include setting Gpio 20 & 21 to default 0xC1
value in order to make gpio 28 & 29 works as uart in mp02.1 rdp
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: I5fd482669c8429f930677f6eb9f1fdc191c7b2a6
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
This patch will update usb3 configurtaion
based on ssphy availability.
Since usb3 ssphy shared with pcie phy,
certain configuration need to be done based
on ssphy availability.
Signed-off-by: Manikanta Mylavarapu <mmanikan@codeaurora.org>
Change-Id: I474a6ea269e7778738ca9464dae510bb58e8bcea
This changes support config based single itb to load kernel
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I163d1788e2875fa8f4dcacb3c1c241535c8658b9
We had identical device-tree for different RDPs
though they are the same except for machid.
This change enables reuse of a single device-tree
across RDPs with same configurations.
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Change-Id: If81b431e4a6afe54e427fe0a52de275fdd29df00
This change will modify PULL value for eMMC CMD line.
with this change the pull value will be GPIO_PULL_UP.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Change-Id: Id884ef4742dca5f2f30c699aa2ab48c0d3c7cc97
This Gephy is internal phy driver for ethernet
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia4e744c0fbd990bdc94fe93263ac2ddbe4cecf61
This changes remove emulation dts and add mp02.1 dts support in
Makefile for tiny-nor build
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I99d28415442b4079d4e67e586b794b88aba403a2
Remove support for hk05 since it is
marked as obsolete in default setting table
Signed-off-by: Karthick Shanmugham <kartshan@codeaurora.org>
Change-Id: I972af09f912c1f613b462cf2559d8a645a0bb270
This is missing, with causes lldiv() to fail on boards with use the private
libgcc. Add the missing routine.
Code is available for using the CLZ instruction but it is not enabled at
present.
This comes from coreboot version 4.0.
Signed-off-by: Simon Glass <sjg@chromium.org>
(cherry picked from commit 9ab60493c9)
Signed-off-by: Balaji Prakash J <bjagadee@codeaurora.org>
Change-Id: Id1d604819be2a98e1cc1ea306902a86323135679
This config need not be defined for IPQ806x. U-boot in
IPQ806x, can run without this CP15BEN setting.
Change-Id: I1b95e2a06f72dcc763a885f81b591d7d529dd446
Signed-off-by: Balaji Prakash J <bjagadee@codeaurora.org>
This changes initialize clock and enable the block of
Gephy, Uniphy, GMAC0 & GMAC1 and also udpate Rx & Tx clock
based on speed.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: Ia2627e17f7029c2d0d1cbb9eff26afb27aa1c057
This changes remove soc dtsi header file and
add only uart and timer nodes.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I87c1f7c87514e993fed7cd4ff14920309d5eb9b3
This change duplicate the mp03.1 dts with minimal node.
Signed-off-by: Vandhiadevan Karunamoorthy <vkarunam@codeaurora.org>
Change-Id: I90a7eac51f022af0d66865cbe6b4df6bc57972a7
