- fix bug: pioasm was spilling bit 5 of arg2 into arg1
- make pio_add_program flip bit 5 of a WAIT GPIO instruction if gpio_base is 16
Note: pioasm will encode only the bits 4-0 of arg2 (the GPIO number), however it does indicate whether
0-15 means 0-15 or 32-47. This can only be fixed up when loading the program, and indeed once the GPIO
base is known. pio_can_add_program and friends already detected the cases where this was impossible
* ci: remove cmake from Windows choco_packages.config as there is already a version in the windows image
* multi-gcc: add GCC 14.2. On RP2040 build for Pico W
* multi_gcc: add host
* support cancellation
---------
Co-authored-by: Liam Fraser <liam@raspberrypi.com>
Don't install CMake, as it comes pre-installed on GitHub runners
This fixes the version incompatibilities that keep appearing with the Windows CI build
If you call rtc_get_datetime immediately after rtc_set_datetime you get
junk back. According to the datasheet "Writing to the RTC will take
2 clk_rtc clock periods to arrive". So add a delay after calling
rtc_set_datetime in aon_timer_set_time_calendar.
Fixes#2148
* on RP2350 _dcp variant now enables -msoft-float, since if you're using this at all it is likely because you don't want to use the VFP unit at all (to save stack space)
* implement all float_ and double_ conversion functions in all pico_float_pico_ variants and pico_double_pico on RP2040 and RP2350 (many were missing in some combinations)
* provide better granularity of what functions are wrapped in each case
also marked custom_xxx_funcs_test.c as not in bazel build yet
The platform.h headers for both RP2040 and RP2350 need 'extern "C"'
declarations when included from C++ code or 'rp2040_chip_version'
and 'rp2350_chip_version' won't be found by the linker.
* Release the lock in mbedtls_sha256_free if it was not released already. Requires making pico_sha256_unlock include-able. Fixes#2103.
* addres lock release API comment
* Fix description of pico_sha256_cleanup
---------
Co-authored-by: nils <nils@nils>
Co-authored-by: Peter Harper <peter.harper@raspberrypi.com>
We use a pio and dma to write to the cyw43 chip using spi. Normally you
write an address and then read the data from that address, so the pio
program does does a write then read.
If you just want to write data in the case of uploading firmware we
use the fdebug_tx_stall flag to work out if the pio has stalled waiting
to write more data.
The theory is that this flag will also get set if the bus is busy. So
we mistakenly think a write to cyw43 has completed.
Wait for the dma write to complete before waiting for the pio to stall.
Fixes#2206
* Remove deprecated uses of FetchContent_Populate
Cannot use MakeAvailable as the files shouldn't be added to the build, so instead uses the full signature for FetchContent_Populate
Fixes#2124
* Fix GIT_SUBMODULES_RECURSE for older CMake versions
