mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-03-04 18:53:47 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 6
openwrt/target/linux/mediatek/dts
History
Andrii Kuiukoff b33df7ba33
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Details
Build all core packages / Build all core packages for selected target (push) Waiting to run
Details
mediatek: add support for COMFAST CF-WR632AX 
COMFAST CF-WR632AX is a compact/travel (123.4 mm * 88.7 mm * 34 mm)
wireless WiFi 6 router.

Specification
-------------
- SoC          : MediaTek MT7981B dual-core ARM Cortex-A53 1.3 GHz
- RAM          : DDR3 512 MiB
- Flash        : SPI-NAND 128 MiB (Winbond)
- WLAN         : MediaTek MT7976CN dual-band WiFi 6
  - 2.4 GHz    : b/g/n/ax, MU-MIMO (2x 5 dBi antennas)
  - 5 GHz      : a/n/ac/ax, MU-MIMO (2x 5 dBi antennas)
- Ethernet     :
  - LAN x1     : 10/100/1000 Mbps (MT7981 internal PHY)
  - WAN x1     : 10/100/1000/2500 Mbps (Maxlinear GPY211C)
- USB x1       : 3.0
- UART         : through-hole on PCB
  - assignment : (RX), (TX), (GND), [VCC]
  - settings   : 115200n8
- Buttons x1   : Reset
- LEDs x3      : Status (Blue, Green, Red)
- Fan x1       : PWM, 4-wire, 5 V, 0.3 A, 45 mm * 10 mm
- Power        : 5 VDC, 3 A, Type-C

Flash instructions
------------------
WebUI Method:

1. Install the *squashfs-sysupgrade.bin image using the stock WebUI
   update page.
2. Press and hold the reset button after reboot
   to wipe the stock config.

SSH Method:

1. Import stock firmware settings from backup file
   github.com/andros-ua/owrt-misc/blob/main/cf-wr632ax/backup.file
   Note: WebUI password will be reset to admin1234 after import.
2. Connect via SSH using root:openwrt credentials.
3. Upload the *squashfs-sysupgrade.bin image.
4. Use the command: sysupgrade -n
   All checks should pass.

Return to stock
---------------
Flash a stock firmware
using the OpenWrt sysupgrade method.

Recovery
--------
Power on the router while holding the Reset button until
the LED flashes 5 times.
The U-Boot Flash WebUI will be available at http://192.168.1.1
or
Connect UART and use the U-Boot menu to flash the firmware image
or boot an OpenWrt initramfs image.

OpenWrt U-Boot flash instructions
---------------------------------
1. Flash ordinary OpenWrt image.
2. Login into the device and backup everything, especially 'Factory' part.
3. Unlock mtd partitions:
    apk add kmod-mtd-rw
    insmod mtd-rw i_want_a_brick=1
4. Write new BL2 and FIP:
    mtd write openwrt-mediatek-filogic-comfast_cf-wr632ax-ubootmod-preloader.bin BL2
    mtd write openwrt-mediatek-filogic-comfast_cf-wr632ax-ubootmod-bl31-uboot.fip FIP
5. Set static IP on your PC:
    ip 192.168.1.254 mask 255.255.255.0
6. Serve OpenWrt initramfs image using TFTP server.
7. Reboot device, wait for TFTP recovery to complete.
8. After OpenWrt has booted, perform sysupgrade.

MAC Addresses:
----------------------------------------------------------
| Interface    |  MAC              | Source              |
---------------|-------------------|----------------------
| WAN (label)  | 40:A5:EF:xx:xx:xx | Factory, 0xe000     |
| LAN          | 40:A5:EF:xx:xx:xx | Factory, 0xe000 + 1 |
| WLAN 2.4 GHz | 40:A5:EF:xx:xx:xx | Factory, 0x4        |
| WLAN 5 GHz   | 40:A5:EF:xx:xx:xx | Factory, 0x8000     |
----------------------------------------------------------

Signed-off-by: Andrii Kuiukoff <andros.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20382
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-11-09 19:33:18 +01:00
..
mt7622-asiarf-ap7622-wh1.dts mediatek: ap7622-wh1: Enable bluetooth interface 2025-09-26 11:57:33 +02:00
mt7622-buffalo-wsr-2533dhp2.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-buffalo-wsr-3200ax4s.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-buffalo-wsr.dtsi mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7622-dlink-eagle-pro-ai-ax3200-a1.dtsi treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7622-dlink-eagle-pro-ai-m32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-dlink-eagle-pro-ai-r32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-elecom-wrc-2533gent.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-elecom-wrc-x3200gst3.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-linksys-e8450-ubi.dts mediatek: fix wrong compatible string 2024-10-06 21:56:04 +02:00
mt7622-linksys-e8450.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-linksys-e8450.dtsi treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7622-netgear-wax206.dts mediatek: mt7622: fix 2.5G WAN port on Netgear WAX206 2025-10-31 09:58:28 +00:00
mt7622-reyee-ax3200-e5.dts mediatek: Update mt7622-reyee-ax3200-e5.dts 2025-03-15 13:48:00 +01:00
mt7622-rfb1-ubi.dts mediatek: re-enable mt7622-rfb1-ubi with changed partition layout 2024-02-28 09:59:43 +01:00
mt7622-ruijie-rg-ew3200.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7622-ruijie-rg-ew3200gx-pro.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-smartrg-SDG-841-t6.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7622-totolink-a8000ru.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7622-ubnt-unifi-6-lr-v1-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v1.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v1.dtsi treewide: enable-gpio to enable-gpios 2025-10-08 14:26:24 +02:00
mt7622-ubnt-unifi-6-lr-v2-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v2.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v3-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v3.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v3.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7622-xiaomi-redmi-router-ax6s.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7623a-unielec-u7623-02-emmc-512m.dts mediatek: u7623-02: enable early console also in legacy image 2022-01-31 00:10:38 +00:00
mt7623a-unielec-u7623-02.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7623a-unielec-u7623-02.dtsi mediatek: mt7623: fix mmc dtc warnings 2025-05-19 20:01:00 +08:00
mt7629-iptime-a6004mx.dts treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7629-linksys-ea7500-v3.dts treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7629-netgear-ex6250-v2.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7629-tplink_eap225-v5.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981a-comfast-cf-e393ax.dts mediatek: dts: remove useless SPI cs-gpios property 2025-10-20 00:28:15 +02:00
mt7981a-edgecore-eap111.dts mediatek: dts: remove useless SPI cs-gpios property 2025-10-20 00:28:15 +02:00
mt7981a-glinet-gl-x3000-xe3000-common.dtsi mediatek: dts: convert pinctrl bias to the Linux generic style 2025-08-24 13:22:08 +02:00
mt7981a-glinet-gl-x3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-glinet-gl-xe3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-teltonika-rutc50.dts mediatek: filogic: add Teltonika RUTC50 support 2025-08-24 17:54:04 +02:00
mt7981a-ubnt-unifi-6-plus.dts mediatek: filogic: load precal data for Unifi 6 Plus 2025-09-27 00:32:40 +02:00
mt7981b-abt-asr3000.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-asus-rt-ax52.dts treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7981b-cetron-ct3003.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-cmcc-a10-stock.dts mediatek: add support for CMCC A10 2025-03-08 15:44:56 +01:00
mt7981b-cmcc-a10-ubootmod.dts mediatek: add support for CMCC A10 2025-03-08 15:44:56 +01:00
mt7981b-cmcc-a10.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cmcc-rax3000m-emmc.dtso mediatek: filogic: fix mmc dtc warnings 2025-05-19 20:00:59 +08:00
mt7981b-cmcc-rax3000m-nand.dtso mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cmcc-rax3000m.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-comfast-cf-wr632ax-common.dtsi mediatek: add support for COMFAST CF-WR632AX 2025-11-09 19:33:18 +01:00
mt7981b-comfast-cf-wr632ax-ubootmod.dts mediatek: add support for COMFAST CF-WR632AX 2025-11-09 19:33:18 +01:00
mt7981b-comfast-cf-wr632ax.dts mediatek: add support for COMFAST CF-WR632AX 2025-11-09 19:33:18 +01:00
mt7981b-confiabits-mt7981.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-creatlentem-clt-r30b1-112m.dts mediatek: add support for CreatLentem CLT-R30B1 2025-08-08 18:12:50 +02:00
mt7981b-creatlentem-clt-r30b1-common.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-creatlentem-clt-r30b1.dts mediatek: add support for CreatLentem CLT-R30B1 2025-08-08 18:12:50 +02:00
mt7981b-cudy-ap3000-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-cudy-ap3000outdoor-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-cudy-m3000-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-cudy-re3000-v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cudy-tr3000-256mb-v1.dts mediatek: add support for Cudy TR3000 256MB v1 flash version 2025-06-22 19:17:25 +02:00
mt7981b-cudy-tr3000-v1-ubootmod.dts mediatek: add ubootmod layout for cudy tr3000 v1 2025-05-27 19:56:55 +08:00
mt7981b-cudy-tr3000-v1.dts mediatek: add ubootmod layout for cudy tr3000 v1 2025-05-27 19:56:55 +08:00
mt7981b-cudy-tr3000-v1.dtsi mediatek: add ubootmod layout for cudy tr3000 v1 2025-05-27 19:56:55 +08:00
mt7981b-cudy-wr3000-nand.dtsi mediatek: Create common DTSI for WR3000H and WR3000S 2025-06-05 21:13:24 +02:00
mt7981b-cudy-wr3000-v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-cudy-wr3000e-v1.dts mediatek: filogic: add support for Cudy WR3000E v1 2025-06-07 18:07:03 +02:00
mt7981b-cudy-wr3000h-v1.dts mediatek: Create common DTSI for WR3000H and WR3000S 2025-06-05 21:13:24 +02:00
mt7981b-cudy-wr3000p-v1.dts mediatek: filogic: add support for Cudy WR3000P v1 2025-09-07 14:44:35 +02:00
mt7981b-cudy-wr3000s-v1.dts mediatek: Create common DTSI for WR3000H and WR3000S 2025-06-05 21:13:24 +02:00
mt7981b-dlink-aquila-pro-ai-m30-a1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-elecom-wrc-x3000gs3.dts mediatek: add missing #address/size-cells for ELECOM WRC-X3000GS3 2025-07-26 15:41:23 +02:00
mt7981b-gatonetworks-gdsp-gps.dtso mediatek: filogic: add SD card support to GatoNetworks GDSP 2025-07-18 12:36:39 +01:00
mt7981b-gatonetworks-gdsp-sd-boot.dtso mediatek: dts: fix some minor dtc warnings 2025-08-24 13:22:09 +02:00
mt7981b-gatonetworks-gdsp-sd.dtso mediatek: filogic: add SD card support to GatoNetworks GDSP 2025-07-18 12:36:39 +01:00
mt7981b-gatonetworks-gdsp.dts treewide: replace numbers with GPIO_ACTIVE 2025-10-08 14:26:24 +02:00
mt7981b-glinet-gl-mt2500-v1.dts mediatek: filogic: fix for new GL.iNet GL-MT2500/GL-MT2500A hardware revision 2025-06-03 23:19:35 +02:00
mt7981b-glinet-gl-mt2500-v2.dts mediatek: filogic: fix for new GL.iNet GL-MT2500/GL-MT2500A hardware revision 2025-06-03 23:19:35 +02:00
mt7981b-glinet-gl-mt2500.dtsi mediatek: dts: convert pinctrl bias to the Linux generic style 2025-08-24 13:22:08 +02:00
mt7981b-glinet-gl-mt3000.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-h3c-magic-nx30-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-huasifei-wh3000-pro.dts mediatek: add Huasifei WH3000 Pro support 2025-07-12 19:31:54 +02:00
mt7981b-huasifei-wh3000.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-iptime-ax3000m.dts mediatek: add missing eeprom for ipTIME AX3000M 2025-09-14 12:52:24 +02:00
mt7981b-iptime-ax3000q.dts mediatek: dts: fix some minor dtc warnings 2025-08-24 13:22:09 +02:00
mt7981b-iptime-ax3000sm.dts mediatek: dts: fix some minor dtc warnings 2025-08-24 13:22:09 +02:00
mt7981b-jcg-q30-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-keenetic-kn-3711.dts treewide: fix mistaken executable bit on dts files 2025-11-06 22:14:56 +01:00
mt7981b-keenetic-kn-3811.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-keenetic-kn-3911.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-konka-komi-a31.dts mediatek: add Konka KOMI A31 support 2025-10-23 00:00:04 +02:00
mt7981b-mercusys-mr80x-v3.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-netis-nx31.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-nokia-ea0326gmp.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-nradio-c8-668gl.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-openembed-som7981.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-openfi-6c.dts treewide: gpio to gpios 2025-10-08 14:26:24 +02:00
mt7981b-openwrt-one.dts mediatek: dts: remove useless SPI cs-gpios property 2025-10-20 00:28:15 +02:00
mt7981b-qihoo-360t7.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-routerich-ax3000-common.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-routerich-ax3000-ubootmod.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-routerich-ax3000-v1.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-routerich-ax3000.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-snr-snr-cpe-ax2.dts mediatek: dts: remove some useless spaces 2025-08-24 13:22:09 +02:00
mt7981b-tenbay-wr3000k.dts mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi 2025-05-26 16:58:03 +01:00
mt7981b-totolink-x6000r.dts mediatek: filogic: add support for Totolink X6000R 2025-09-21 15:49:15 +02:00
mt7981b-tplink-fr365v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-unielec-u7981-01-emmc.dts mediatek: filogic: fix mmc dtc warnings 2025-05-19 20:00:59 +08:00
mt7981b-unielec-u7981-01-nand.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-unielec-u7981-01.dtsi mediatek: remove loglevel in bootargs 2025-08-11 10:40:26 +02:00
mt7981b-wavlink-wl-3port-128nand-common.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn551x3.dts mediatek: dts: remove some useless spaces 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn573hx3.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn586x3.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-wavlink-wl-wn586x3b.dts mediatek: filogic: support WAVLINK WL-WN586X3 Rev B 2025-08-24 15:50:46 +02:00
mt7981b-xiaomi-mi-router-ax3000t-ubootmod.dts mediatek: filogic: convert Xiaomi AX3000T to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dts mediatek: fix nmbm configuration mismatch (Xiaomi AX3000t) 2025-02-07 09:04:35 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-common.dtsi mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-xiaomi-mi-router-wr30u-stock.dts mediatek: filogic: add support for Xiaomi WR30U 2023-07-27 13:46:16 +02:00
mt7981b-xiaomi-mi-router-wr30u-ubootmod.dts mediatek: filogic: convert Xiaomi WR30U to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-wr30u.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-yuncore-ax835.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-zbtlink-zbt-z8102ax-v2.dts mediatek: dts: remove some useless spaces 2025-08-24 13:22:09 +02:00
mt7981b-zbtlink-zbt-z8102ax.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7981b-zbtlink-zbt-z8103ax.dts mediatek: dts: fix the broken memory node 2025-08-24 13:22:08 +02:00
mt7981b-zyxel-nwa50ax-pro.dts mediatek: filogic: use NVMEM for wifi macaddr on NWA50AX Pro 2025-09-10 22:57:49 +02:00
mt7986a-acelink-ew-7886cax.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-acer-predator-w6.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-acer-predator-w6d.dts mediatek: filogic: PHY LEDs do have an address, gpio-leds don't 2025-03-21 01:19:19 +00:00
mt7986a-acer-predator-w6x-stock.dts mediatek: Add support for Acer Predator Connect W6x Ubootmod 2025-10-31 09:40:07 +00:00
mt7986a-acer-predator-w6x-ubootmod.dts mediatek: Add support for Acer Predator Connect W6x Ubootmod 2025-10-31 09:40:07 +00:00
mt7986a-acer-predator-w6x.dtsi mediatek: Add support for Acer Predator Connect W6x Ubootmod 2025-10-31 09:40:07 +00:00
mt7986a-acer-vero-w6m.dts mediatek: add support for Acer Predator W6d and Acer Vero W6m 2024-11-23 19:33:42 +01:00
mt7986a-acer-w6-common.dtsi mediatek: dts: remove mt7531 switch reset delay time properties 2025-08-24 13:22:09 +02:00
mt7986a-asiarf-ap7986-003.dts mediatek: filogic: add support for AsiaRF AP7986-003 2025-09-20 19:13:47 +02:00
mt7986a-asus-rt-ax59u.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-asus-tuf-ax4200.dts mediatek: dts: remove mt7531 switch reset delay time properties 2025-08-24 13:22:09 +02:00
mt7986a-asus-tuf-ax6000.dts mediatek: dts: remove mt7531 switch reset delay time properties 2025-08-24 13:22:09 +02:00
mt7986a-bananapi-bpi-r3-mini.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-dlink-aquila-pro-ai-m60-a1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-glinet-gl-mt6000.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-iptime-ax7800m-6e.dts mediatek: add support for ipTIME AX7800M-6E 2025-09-13 18:41:50 +02:00
mt7986a-jdcloud-re-cp-03.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-netcore-n60-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-netcore-n60.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-ruijie-rg-x60-pro.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-smartrg-bonanza-peak.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-smartrg-SDG-8612.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8614.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8622.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8632.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-tplink-archer-ax80-v1.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr-common.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr4288.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr6086.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xdr6088.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-tplink-tl-xtr8488.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-xiaomi-redmi-router-ax6000-stock.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7986a-xiaomi-redmi-router-ax6000.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986a-zyxel-ex5601-t0-common.dtsi mediatek: dts: remove useless SPI cs-gpios property 2025-10-20 00:28:15 +02:00
mt7986a-zyxel-ex5601-t0-stock.dts mediatek: filogic: Zyxel EX5601-T0 dts cleanup 2025-09-11 00:11:30 +02:00
mt7986a-zyxel-ex5601-t0-ubootmod.dts mediatek: filogic: Zyxel EX5601-T0 dts cleanup 2025-09-11 00:11:30 +02:00
mt7986a-zyxel-ex5700-telenor.dts mediatek: dts: remove useless SPI cs-gpios property 2025-10-20 00:28:15 +02:00
mt7986b-buffalo-wsr-6000ax8.dts mediatek: add support for Buffalo WSR-6000AX8 and AX8P 2025-09-22 00:57:51 +02:00
mt7986b-mercusys-mr90x-v1-common.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986b-mercusys-mr90x-v1-ubi.dts mediatek: filogic: fix WiFi MAC address invalid length dtc warnings 2025-05-19 20:01:00 +08:00
mt7986b-mercusys-mr90x-v1.dts mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-11-30 18:36:05 +01:00
mt7986b-netgear-wax220.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7986b-tplink-re6000xd.dts mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7987.dtsi mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-1pcie-2L.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-2pcie-1L.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-emmc.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-mikrobus.dtsi mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-nand.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-nor.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite-sd.dtso mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-bananapi-bpi-r4-lite.dts mediatek: add support for BananaPi BPi-R4 Lite 2025-11-05 14:19:40 +00:00
mt7987a-rfb-emmc.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth0-an8801sb.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth0-an8855.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth0-e2p5g.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth0-mt7531.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth1-i2p5g.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth2-an8801sb.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth2-e2p5g.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth2-sfp.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-eth2-usb.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-sd.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-spim-nand.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb-spim-nor.dtso mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a-rfb.dts mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987a.dtsi mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7987b.dtsi mediatek: build image for MT7987 RFB 2025-11-05 14:19:40 +00:00
mt7988a-arcadyan-mozart.dts mediatek: cleanup device tree for mt7988 devices 2025-06-13 11:15:08 +02:00
mt7988a-smartrg-mt-stuart.dtsi mediatek: dts: use dt-bindings enumerated drive strength values 2025-08-24 13:22:09 +02:00
mt7988a-smartrg-SDG-8733.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988a-smartrg-SDG-8734.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988d-asus-zenwifi-bt8-ubootmod.dts mediatek: cleanup device tree for mt7988 devices 2025-06-13 11:15:08 +02:00
mt7988d-asus-zenwifi-bt8.dts mediatek: dts: bring mt7988a.dtsi closer to upstream 2025-05-26 16:58:03 +01:00
mt7988d-asus-zenwifi-bt8.dtsi mediatek: dts: convert pinctrl bias to the Linux generic style 2025-08-24 13:22:08 +02:00
mt7988d-smartrg-SDG-8733A.dts mediatek: dts: bring mt7988a.dtsi closer to upstream 2025-05-26 16:58:03 +01:00
mt7988d-tplink-be450.dts mediatek: filogic: add support for TP-LINK BE450 2025-11-08 23:39:59 +01:00